| TV and SAT TV | ![]() |
|
Accessories |
||
Wireless Transmitter/Receiver Set: Signal T-1 (A/V + IR, 2.4GHz)
43.84 EUR | ||
Discount: 0% | ||
The set is designed for wireless audio/video transmission and extended communication with a remote control. It has been tested that the extension works properly even if the locations are separated by two walls. The device sends stereo audio signal and can be used for transmission of A/V signals from a DVD, VCR, or DVB-S/DVB-T receiver.
Signal T-1 functioning as the transmitter of IR signal from a remote controller is completely transparent. There can be controlled any device (receiver, DVD, VCR). T-1 is powered from 12VDC source (the power supplies are included in the set). The set has got the CE compliance certificate.
Specifications:
| Name | Signal T-1 | |
| Code | R94115 | |
| Transmitter | ||
| Output power | dBuV | 90 +/- 3dB, over three meters |
| Frequency |
| 2.4 GHz band (2.4835 GHz) |
| Modulation | FM | |
| Video signal level | 1V p-p @ 75ohm | |
| Video signal level | 1V p-p @ 600 ohm (stereo) | |
| A/V inputs | RCA | |
| IR transmission wave range | 940 nm | |
| Antenna | integrated | |
| Power (inner) | 12V DC, 350mA | |
| Dimensions | cm | 18x 12 x 5 |
| Weight | g | 360 |
| Receiver | ||
| Frequency |
| 2.4 GHz (2.4835 GHz) |
| Noise level | 3.5 dB | |
| Video signal level | 1V p-p @ 75ohm | |
| Audio signal level | 1V p-p @ 600 ohm (stereo) | |
| Outputs | A/V jack - RCA | |
| Power (inner) | 12VDC 350mA | |
| Antenna | integrated | |
| Frequency of the remote control | MHz | 433.92 |
| Dimensions | cm | 14 x 12 x 8 |
| Weight | g | 410 |

Example of application
43.84 EUR | ||
Discount: 0% | ||



PRINT


