Support
Details
The FW-LED2D wireless LED controller (DIN rail mountable) is designed for control of two LED light sources powered with 10-16 VDC voltage. The control can be performed remotely by any controls/transmitters of the F&Wave system. The unit can switch on/off the connected LED light sources and change their light intensity (PWM).
F&Wave is a family of devices managed wirelessly over distances up to 100 m, for control of various electrical appliances. The receivers/actuators have versions suited for installation on DIN rails (1S modules) or for placing in Ø60 round recessed boxes. They can be controlled via additional local buttons, or remotely, with handheld or fixed remote control units. A unique feature of the system is the retransmission of the control signals through the modules, which improves reliability and extends the range of operation.
Two inputs (S1, S2) can be used for local control of the device with two monostable, potential-free switches: consecutive short pressings of the dedicated button result in alternate switching ON and OFF the load. Longer pressing of the button (above 1 second) starts lighting up (by increments 10%). Another longer pressing of the button will have the opposite effect (dimming, 10% steps).
The FW-RC4 F3104 and FW-RC10 F3110 remote controls operate as bistable switches: consecutive short pressings of the dedicated button result in alternate switching ON and OFF the load. Longer pressing of the button (above 1 second) starts lighting up (by increments 10%). Another longer pressing of the button will have the opposite effect (dimming, 10% steps). The FW-RC5 F3105 control also has separate inputs for connecting "always switch ON" and "always switch OFF" switches.
Key features
- 2-channel wireless LED controller (for 12 VDC applications, min 10 V, max 16 V)
- Designed for F&Wave wireless systems,
- Can be controlled from up to 8 remote controls,
- Can be controlled locally with any monostable potential-free contacts,
- For control of 12 VDC LED strips and/or 12 VDC dimmable LED bulbs,
- Slim (1S), to be mounted on a DIN rail,
- Screw terminals,
- Retransmission of control commands for higher reliability and wireless range extension,
- Low power consumption,
- Built-in thermal overload protection.

Applications of F&Wave system
- A - a LED strip
- LED strips are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by handheld remote controls. The strips can be switched on/off and dimmed. There are two versions of 2-channel LED controllers:
- B - a roller blind
- Roller blinds are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by a handheld remote control. There are two versions of the controllers (230 VAC):
- C - an electrical appliance with switch ON/OFF control
- This type of devices can be controlled with relay modules. The dedicated relay modules are composed of one or two relays. The switch ON/OFF function can be performed locally (with additional keys connected to a module) or wirelessly, by a handheld remote control. The available relay modules:
- D - a dimmable light source
- The control of dimmable light sources is carried out by dedicated dimmers. A light source can be switched ON/OFF and dimmed/lightened to a desirable level either locally (with additional keys connected to the dimmer module) or remotely (a handheld remote control). The available dimmers:
- E - 5-button transmitter (to be placed in a Ø60 flush-mounted box)
- The transmitter controls paired modules.
- FW-RC5 F3105
- F - handheld remote control
- Handheld remote controls allow users to control paired components of F&Wave systems. The available units:

Wiring diagram
Specifications
Name | 2-channel Wireless LED Controller F&Wave FW-LED2D |
Code | F3422 |
Power [VDC] | 10...16 |
Power consumption [W] | 0.4 |
Max load | 2x 6 A / 12 VDC |
Wireless interface frequency [MHz] | 868 |
Operating temperature range [°C] | -25...65 |
Screw terminals [mm²] | 2.5 |
Mounting | DIN rail TH-35 mm |
IP rating | IP20 |
Specifications
Nazwa | Dwukanałowy sterownik LED FW-LED2D |
Kod | F3422 |
Zasilanie [V] | DC 10...16 |
Pobór mocy [W] | 0,40W |
Obciążenie wyjścia | 2x 6A / 12 V DC |
Częstotliwość radia [MHz] | 868 |
Temperatura pracy [°C] | -25...65 |
Przyłącze [mm²] | śrubowe 2,5 |
Montaż | szyna DIN |
Stopień ochrony | IP20 |