2-channel Wireless LED Controller: F&Wave FW-LED2P

Code: F3421
This product is no longer available

Support

Details

2-channel Wireless LED Controller: F&Wave FW-LED2P
General view
2-channel Wireless LED Controller: F&Wave FW-LED2P
View of the packaging
The FW-LED2P wireless LED controller is designed for control of two LED light sources powered with 10-16 VDC voltage. The control can be performed remotely by any controls/transmitters of the F&Wave system and/or locally. The unit can switch on/off the connected LED light sources and change their light intensity (PWM).

Two inputs (S1, S2) can be used for local control of the device with two monostable, potential-free switches: consecutive short pressings of the dedicated button result in alternate switching ON and OFF the load. Longer pressing of the button (above 1 second) starts lighting up (by increments 10%). Another longer pressing of the button will have the opposite effect (dimming, 10% steps).
The FW-RC4 F3104 and FW-RC10 F3110 remote controls operate as bistable switches: consecutive short pressings of the dedicated button result in alternate switching ON and OFF the load. Longer pressing of the button (above 1 second) starts lighting up (by increments 10%). Another longer pressing of the button will have the opposite effect (dimming, 10% steps). The FW-RC5 F3105 control also has separate inputs for connecting "always switch ON" and "always switch OFF" switches.

  • 2-channel wireless LED controller (for 12 VDC applications, min 10 V, max 16 V)
  • Designed for F&Wave wireless systems,
  • Can be controlled from up to 8 remote controls,
  • Can be controlled locally with any monostable potential-free contacts,
  • For control of 12 VDC LED strips and/or 12 VDC dimmable LED bulbs,
  • Small size, can be mounted in a Ø60 flush box,
  • Screw terminals,
  • Retransmission of control commands for higher reliability and wireless range extension,
  • Low power consumption,
  • Built-in thermal overload protection.
2-channel Wireless LED Controller: F&Wave FW-LED2D (for DIN rail)2-channel Wireless LED Controller: F&Wave FW-LED2PRoller Blind Controller: F&Wave FW-STR1D (1.5A/230VAC, for DIN rail)Roller Blind Controller: F&Wave FW-STR1P (0.6A/230VAC)Single Bistable Relay F&Wave FW-R1D (for DIN rail)Single Bistable Relay F&Wave FW-R1PSingle Bistable Relay F&Wave FW-R1PWireless Dimmer F&Wave FW-D1P5-button Remote Control: F&Wave FW-RC5 (for Ø60 box)10-button Remote Control: F&Wave FW-RC104-button Remote Control: F&Wave FW-RC4
Applications of F&Wave system


  • A - a LED strip
    • LED strips are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by handheld remote controls. The strips can be switched on/off and dimmed. There are two versions of 2-channel LED controllers:
      • FW-LED2P F3421,
      • FW-LED2D (to be mounted on DIN rail F3422).
  • B - a roller blind
    • Roller blinds are controlled with dedicated controllers, managed by local buttons connected directly to a controller, or, more conveniently, by a handheld remote control. There are two versions of the controllers (230 VAC):
      • FW-STR1P F3521,
      • FW-STR1D (to be mounted on DIN rail F3422).
  • C - an electrical appliance with switch ON/OFF control
    • This type of devices can be controlled with relay modules. The dedicated relay modules are composed of one or two relays. The switch ON/OFF function can be performed locally (with additional keys connected to a module) or wirelessly, by a handheld remote control. The available relay modules:
      • Single bistable relay FW-R1P F3211,
      • Single bistable relay FW-R1D (to be mounted on DIN rail F3422),
      • Double bistable relay FW-R2D F3221,
      • Double bistable relay FW-R2D (to be mounted on DIN rail F3422).
  • D - a dimmable light source
    • The control of dimmable light sources is carried out by dedicated dimmers. A light source can be switched ON/OFF and dimmed/lightened to a desirable level either locally (with additional keys connected to the dimmer module) or remotely (a handheld remote control). The available dimmers:
      • Wireless dimmer FW-D1P F3311,
      • Wireless dimmer FW-D1D (to be mounted on DIN rail F3422).
  • E - 5-button transmitter (to be placed in a Ø60 flush-mounted box)
    • The transmitter controls paired modules.
  • F - handheld remote control
    • Handheld remote controls allow users to control paired components of F&Wave systems. The available units:
Wiring diagram
Specifications
Name 2-channel Wireless LED Controller  F&Wave FW-LED2P
Code F3422
Power [VDC] 10...16
Power consumption [W] 0.4
Max load
2x 6 A / 12 VDC
Wireless interface frequency [MHz] 868
Operating temperature range [°C] -25...65
Screw terminals [mm²] 2.5
Mounting

in Ø60 flush box

IP rating
IP20

Specifications

Name Two-channel LED controller FW-LED2D
Product type Transmitter, Relay, LED controller
System F&Wave
Mounting In-box
Transmission type Two-way
Frequency MHz 868
Applications indoor
Number of relays 2
Relay parameters maximum current A 6
maximum voltage V 12
contact type PWM
Number of transmitters 2
Range m 100
Protection rating IP20
Operating temperature °C -25...65