4K IP NVR: Hikvision DS-7608NI-K1/8P(C) (8 ch., 80 Mbps, 1 x SATA, VGA, HDMI, 8 x PoE, H.265/H.265)



Hikvision DS-7608NI-K1/8P(C) is a modern 8-channel IP recorder, recording image from IP cameras with a resolution of 8 MP. It has a built-in 8-port PoE switch for direct connection and supplying of IP cameras. It is equipped with parallel HDMI/VGA outputs that display the same image. 1 SATA port enable connection of hard drives with a capacity of up to 8 TB. If the memory is full, automatic overwriting is triggered to prevent the loss of the latest data. The built-in USB ports allow you to connect a USB flash drive or external disk and copy specific fragments to external data carriers. The DVR supports cameras with built-in VCA analytics (e.g., virtual line, trespassing area, etc.) for quick search of interesting footage. In addition, when cameras with AcuSense are connected to it, it is possible to quickly search for recordings that meet the human/vehicle type criteria.
NOTE! Current software version is available 
Key features:
  • Recording in resolutions up to 8 MP,
  • Simultaneous HDMI/VGA outputs,
  • Maximum input/output bandwidth - 80/80 Mbps,
  • Supports up to 8 IP cameras from Hikvision or other manufacturers via Onvif,
  • Built-in 8-port PoE switch,
  • Supports 1 SATA drive with a capacity of up to 8 TB,
  • Supports cameras with built-in analytics VCA (virtual line, intrusion detection, etc.),
  • Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter),
  • Supported compression H.265 (+)/H.264 (+)/MPEG4, *Functions supported: ANR,
  • Audio I/O for two-way communication,
  • 2 x USB 2.0,
  • Ethernet ports: 1 x Rj 10100/1000 Mbps,
  • Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS),
  • Access via P2P.
Support for intelligent VCA events
The DVR supports VCA alarms (e.g., line crossing, intrusion detection, area entry and exit, etc.) that can be generated and sent by Hikvision IP cameras. To use this functionality, the camera must support the VCA alarm in question. When a triggering criterion is met, a specific alarm action can be triggered, such as: triggering an alarm output, sending an email, notifying a monitoring center, etc., depending on the configuration. Extensive analytic functions allow for more advanced projects, quick searches for events of interest, and smart recording that saves hard drive space.
Support for AcuSense cameras with Motion Detection 2.0
You can connect AcuSense series cameras equipped with Motion Detection 2.0 algorithm to the DVR. The motion detection system 2.0 can analyze detection events in terms of human or vehicle detection. Thanks to that, alarm notifications are filtered and unnecessary alarms are blocked. Recordings stored on the DVR, can be easily and quickly searched for human/vehicle criteria.
H.265 (+) compression
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
H.265/H.265+ - higher compression ratios with preserving video quality provided by H.264
iVMS-4200 client software
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
Login page of the iVMS-4200 (v3) client software
Access via P2P cloud - Hik-Connect application
A mobile application Hik-Connect is dedicated to operate Hikvision devices using cell phones with the operating system Android or iOS. It can be used to remotely view live video from DVR, NVR, network cameras, video intercoms using Wi-Fi, 2G or 3G networks as well as to view recorded video. Video intercoms can be operated with the application which additionally allows for remote opening of electric doors, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the resident. The application supports connectivity via IP and the P2P cloud. Hik-Connect is also the name of a cloud-based service that allows access to devices in the absence of an external IP address.

Continuity of recordings guaranteed thanks to the ANR function


Model DS-7608NI-K1/8P(C)
Product type IP recorder
type Standard
Brand Hikvision
Series K series
Number of channels 8
Operating band Input MBps 80
Output MBps 80
Output modes HDMI/VGA Parallel
Max. output resolution HDMI 1 px 4K (3840 × 2160)
VGA 1 px 1920 × 1080
Coding/decoding compression standards H.265+, H.265, H.264+, H.264, MPEG4
max. recording resolution MP 8
synchronous playback 8 channels
max. decoding resolution 1 channel 8 MP, 4 channels 1080p
HDD Number of SATA interfaces 1
max. capacity of each HDD TB 8
USB 2.0 2
Two-way audio Yes
Audio Input 1, RCA (2.0 Vp-p, 1 kOhm)
Output 1, RCA (linear, 1 kOhm)
Alarm Output 1
Ethernet 1 × RJ-45 10/100
Built in PoE switch Yes
PoE number of ports 8 × RJ-45 10/100 Base-T
standard IEEE 802.3 af/at
Power output W max. 75
Applications iVMS-4200, Hik-Connect
Archiving USB, Remote
Smart functions
Support for motion detection and VCA functions Yes
Additional functions ANR
Power supply DC V 48
DC W max. 90
Current drawn (no HDD and PoE) W max. 10
Operating temperature °C -10...+55
Humidity % 95 or less (non-condensing)
Height U 1
Dimensions (W × D × H) mm 320 × 240 × 48
Weight kg 2,2