4K IP NVR: Hikvision DS-7608NXI-I2/S(C) (8 ch, 80 Mbps, 2xSATA, 4xAcuSense, face detection, VGA, HDMI, BNC, H.265)

Code: K22097
Price Disc. Quantity Validity
€635.41 0 % from 1 piece
Hikvision DS-7608NXI-I2/S(C) is a modern 8-channel IP network video recorder with object filtering function for: human, vehicle and face detection.
• Recording resolution up to 12 MP
• Resolution of independent video outputs: HDMI up to 4K@30Hz, VGA up to 1080p@60Hz
• BNC output with resolution 4CIF
• Max total bandwidth (input/output): 80/256 Mbps
• Support of 8 IP cameras (Hikvision or ONVIF-compliant)
• Support for two SATA HDDs, each up to up 10 TB 9a total of 20 TB)
• AcuSense image analysis in 4 channels (for cameras without AcuSense)
• Support for AcuSense cameras in all channels
• AI functions: perimeter protection, face detection and analysis, object classification (human, vehicle)
• Support for cameras with built-in VCA
• Compression supported H.265 (+) / H.264 (+)/MPEG4
• Support for: ANR, POS (integration with cash registers)
• Audio I/O for two-way communication
• Alarm I/O: 4 / 1
• 1 x USB 2.0, 1 x USB 3.0
• Ethernet ports: 2 x Rj-45 10/100/1000 Mb/s
• Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS)
• Access via P2P cloud


3-year warranty.



Hikvision DS-7608NXI-I2/S(C) is a modern 8-channel IP recorder, recording image from IP cameras with a resolution of 12 MP. Independent HDMI (resolution up to 4K) and VGA (resolution up to 1080p) allow you to connect two monitors. The view on each output can be configured independently, different window divisions and are possible and the image from any camera can be displayed on each of them. 2 SATA ports enable connection of hard drives with a capacity of up to 10 TB each. If the memory is full, automatic overwriting is triggered to prevent the loss of the latest data. The built-in USB ports allow you to connect a USB flash drive or external disk and copy specific fragments to external data carriers.

NOTE! Current software is available
Key features
  • Recording resolution up to 12 MPix,
  • Resolution of independent video outputs: HDMI (4K/30/60 Hz)/VGA (1080p/60 Hz),
  • BNC output with resolution 4CIF,
  • Max total bandwidth (input/output): 80 / 256 Mb/s,
  • Support of up to 8 IP Hikvision cameras or other via Onvif,
  • Support for 2 SATA HDDs with a capacity of 10 TB (total of 20 TB),
  • AcuSense image analysis in 4 4 channels (for cameras without AcuSense),
  • Support for AcuSense cameras in all channels,
  • AI functions: perimeter protection, face detection, object classification (human, vehicle),
  • Support for cameras with built-in VCA,
  • Supported compression H.265 (+)/H.264 (+)/MPEG4,
  • Support for: ANR, POS (integration with cash registers),
  • Audio I/O for two-way communication,
  • Alarm I/O: 4 / 1,
  • 1 x USB 2.0, 1 x USB 3.0,
  • Ethernet ports: 2 x Rj-45 10/100/1000 Mb/s,
  • Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS),
  • Access via P2P.
IP NVR Hikvision DS-7608NI-SE/P (8ch, 40Mbps, 2xSATA, HDMI, 8xPoE)
Recorder dimensions
Artificial Intelligence AI and AcuSense
Artificial intelligence plays a key role in CCTV systems. Cameras and recorders with AcuSense technology analyze the image based on a deep learning algorithm. They reflect the structure and principles of the human brain. As in the brain, learning creates connections between artificial neurons (programs) and creates a multi-layer artificial neural network. The algorithm individually analyzes model photos and recordings, looking for common features, and then creates appropriate connections. The so-called layers, responsible for detecting a specific feature, are built this way. The more layers an algorithm has, the more accurate the analysis is. Therefore, teaching with large amounts of data is crucial. Only multi-layer networks can collect information and perform appropriate actions, in particular automatic extraction and representation of features (patterns) present in the data, teaching the network for example to recognize faces, vehicle brands, animal species or incident, e.g. a fall. The presented recorder model has two key AI functions, which include:
  • perimeter protection (filtering of human/vehicle objects)
  • face recognition (face analysis and detection, face comparison, library creation)

NOTE! Perimeter protection and face recognition cannot work simultaneously. Enabling one function will make the others unavailable.
Perimeter protection
Perimeter protection ensures early detection of people who intend to violate the protected area. When building a security system, its resistance to false alarms, triggered by e.g. animals, moving trees, leaves, shadows, weather conditions, etc. is extremely important. Ideal for such surveillance applications are cameras and recorders with the AcuSense technology which analyzes objects based on the Deep Learning algorithm, considering events meeting certain criteria as real threats. The model of recorder described has an option of filtering false alarms of a human/vehicle objects in 4 channels, enabling the classification of objects according to the silhouette of a person or a vehicle (for cameras not supporting the AcuSense). Once the AcuSense cameras are connected, they will be fully supported in all channels. This type of solution allows for an effective reduction of false alarms and quick search for the registered ones
The idea of AcuSense technology
Face analysis
The recorder has 4 channels to which cameras with the face capture function can be connected. If the cameras do not support this function, it can be run by the recorder in 1 channel. Up to 16 face libraries can be created in the recorder based on which the control will be performed. It is also possible to upload a photo from the outside in order to search the database.
H.265 (+) compression
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265 + has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
H.265/H.265+ - higher compression ratios with preserving video quality provided by H.264
iVMS-4200 client software
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as recorders (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
Login page of the iVMS-4200 (v3) client software
Access via P2P cloud - Hik-Connect application
Hikvision devices can be operated via mobile phones with Android or iOS using the dedicated Hik-Connect mobile application. It can be used for remote live viewing from DVRs, NVRs, IP cameras, video intercoms over the WiFi, 2G or 3G and to view saved recordings. Operating video intercoms with the application provides also remote opening of the electric strike, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the subscriber. The application supports connectivity over IP and a P2P cloud. Hik-Connect is also the name of the cloud service that provides access to devices in the absence of an external IP address.
Continuity of recordings guaranteed thanks to the ANR function
The image from the IP camera is sent to the recorder as a data stream. Thanks to the support of the ANR (Automatic Network Replenishment) function, the Hikvision IP camera equipped with a microSD card can save recordings on it in the event of network failure, i.e. problems with communication between the camera and the recorder. After the problem is solved, the recordings are automatically synchronized with the recorder and marked with a different color on the playback bar. Such a solution guarantees the continuity of recordings and boosts the entire system performance.
Extensive applications for the organization and use of CCTV systems
Various applications intended for the installers and operators/users of video surveillance systems based on Hikvision devices are described in our library.

The main window of the SADP software
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.


Model DS-7608NXI-I2/S(C)
Product type IP recorder
type Standard
Brand Hikvision
Series NXI-I AcuSense Series
Number of channels 8
Operating band Input MBps 80
Output MBps 256
Output modes HDMI 1/VGA 1 Independent
Max. output resolution HDMI 1 px 4K (3840 × 2160)
VGA 1 px 1920 × 1080
BNC px 704 × 576
Coding/decoding compression standards H.265+, H.265, H.264+, H.264, MPEG4
max. recording resolution MP 12 (32 and 24 are available for 1 channel with UltraHD mode enabled. Available then are max. 24 channels)
two stream recording Yes
synchronous playback 8 channels
max. decoding resolution 1 channel 32, 2 channels 12, 4 channels 8, 8 channels 4, 16 channels 1080p, 16 × 1080p channels
HDD Number of SATA interfaces 2
max. capacity of each HDD TB 10
USB 2.0 1
3.0 1
Two-way audio Yes
Audio Input 1, RCA (2.0 Vp-p, 1 kOhm)
Output 1, RCA (linear, 1 kOhm)
Alarm inputs/outputs Yes
Alarm Input 4
Output 1
Ethernet 2 × RJ-45 10/100/1000
Applications iVMS-4200, Hik-Connect
Archiving USB, Remote
Smart functions
AcuSense false alarm filter on 4 channels for cameras without AcuSense (max. 2 MP, H.265, H.264 compression)
Face recognition face photo library 16 libraries
face photo library 100,000 photos
face analysis and detection Face photo comparison, Fact capturing, Face image search
Face photo comparison 4 channels
face analysis and detection effectiveness 1-channel face capture (camera up to 8 MP, H.264/H.265)
NOTE! Face detection and people/vehicle classification cannot be enabled at the same time. Enabling one function will make the other unavailable
Support for motion detection and VCA functions Yes
Additional functions ANR, HotSwap/Hot Plug, POS
Power supply AC V 100...240
Current drawn (no HDD and PoE) W max. 15
Operating temperature °C -10...+55
Humidity % 95 or less (non-condensing)
Height U 1,5
Dimensions (W × D × H) mm 385 × 315 × 52
Weight kg 2,9