4K IP NVR: Hikvision DS-7632NI-I2 (32 ch, 256 Mbps, 2xSATA, Alarm in/out, HDMI/VGA, H.265)

Support

Details

Hikvision DS-7632NI-I2 is a modern 32-channel IP recorder, recording image from IP cameras with a resolution of 12 MP. Independent HDMI and VGA outputs allow you to connect two monitors. The view on each output can be configured independently, different window divisions and are possible and the image from any camera can be displayed on each of them. 2 SATA ports enable connection of hard drives with a capacity of up to 10 TB each. If the memory is full, automatic overwriting is triggered to prevent the loss of the latest data. The built-in USB ports allow you to connect a USB flash drive or external disk and copy specific fragments to external data carriers. Support for cameras dedicated to identifying license plates ANPR, PTZ cameras, VCA analysis and the possibility of integration with cash registers using POS allows the recorder to be used for projects with various advancement levels. Intelligent options for searching and analyzing recordings allow you to quickly extract a fragment of interest from the recorded footage. When cameras with AcuSense are connected to it, it is possible to quickly search for recordings that meet the human/vehicle type criteria.
NOTE! Current software version is available 
Key features:
  • Recording in resolutions up to 12 MP,
  • IndependentHDMI/VGA outputs,
  • Maximum input/output bandwidth - 256/256 Mbps,
  • Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif,
  • Supports 2 SATA drives with a capacity of up to 10 TB,
  • Supports cameras with built-in analytics VCA (virtual line, intrusion detection, etc.),
  • Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter),
  • Supported compression H.265 (+)/H.264 (+)/MPEG4,
  • Functions supported: ANR, POS (integration with cash registers),
  • Audio I/O for two-way communication,
  • Alarm I/O: 4 / 1,
  • 1 x USB 2.0, 1 x USB 3.0,
  • Ethernet ports: 1 x Rj-45 10/100/1000 Mb/s,
  • Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS),
  • Access via P2P.
Support for intelligent VCA events
The DVR supports VCA alarms (e.g., line crossing, intrusion detection, area entry and exit, etc.) that can be generated and sent by Hikvision IP cameras. To use this functionality, the camera must support the VCA alarm in question. When a triggering criterion is met, a specific alarm action can be triggered, such as: triggering an alarm output, sending an email, notifying a monitoring center, etc., depending on the configuration. Extensive analytic functions allow for more advanced projects, quick searches for events of interest, and smart recording that saves hard drive space.
Support for AcuSense cameras with Motion Detection 2.0
You can connect AcuSense series cameras equipped with Motion Detection 2.0 algorithm to the DVR. The motion detection system 2.0 can analyze detection events in terms of human or vehicle detection. Thanks to that, alarm notifications are filtered and unnecessary alarms are blocked. Recordings stored on the DVR, can be easily and quickly searched for human/vehicle criteria.
H.265 (+) compression
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
H.265/H.265+ - higher compression ratios with preserving video quality provided by H.264
iVMS-4200 client software
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
Login page of the iVMS-4200 (v3) client software
Access via P2P cloud - Hik-Connect application
A mobile application Hik-Connect is dedicated to operate Hikvision devices using cell phones with the operating system Android or iOS. It can be used to remotely view live video from DVR, NVR, network cameras, video intercoms using Wi-Fi, 2G or 3G networks as well as to view recorded video. Video intercoms can be operated with the application which additionally allows for remote opening of electric doors, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the resident. The application supports connectivity via IP and the P2P cloud. Hik-Connect is also the name of a cloud-based service that allows access to devices in the absence of an external IP address.

Continuity of recordings guaranteed thanks to the ANR function
The image from the IP camera is sent to the recorder as a data stream. Thanks to the support of the ANR (Automatic Network Replenishment) function, the Hikvision IP camera equipped with a microSD card can save recordings on it in the event of network failure, i.e. problems with communication between the camera and the recorder. After the problem is solved, the recordings are automatically synchronized with the recorder and marked with a different color on the playback bar. Such a solution guarantees the continuity of recordings and boosts the entire system performance.
Extensive applications for the organization and use of CCTV systems
Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.

The main window of the SADP software
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.

Specifications

Model DS-7632NI-I2
Product type IP recorder
type Standard
Brand Hikvision
Parameters
Number of channels 32
Operating band Input MBps 256
Output MBps 256
Output modes HDMI/VGA Independent
Max. output resolution HDMI 1 px 4K (3840 × 2160)
VGA 1 px 1920 × 1080
Coding/decoding compression standards H.265+, H.265, H.264+, H.264, MPEG4
max. recording resolution MP 12 (32 and 24 are available for 1 channel with UltraHD mode enabled. Available then are max. 24 channels)
two stream recording Yes
synchronous playback 16 channels
max. decoding resolution 2 channels 12 MP, 4 channels 8 MP, 8 channels 4 MP, 16 channels 1080p
HDD Number of SATA interfaces 2
max. capacity of each HDD TB 10
USB 2.0 1
3.0 1
Two-way audio Yes
Audio Input 1, RCA (2.0 Vp-p, 1 kOhm)
Output 1, RCA (linear, 1 kOhm)
Alarm inputs/outputs Yes
Alarm Input 4
Output 1
Ethernet 1 × RJ-45 10/100/1000 Base-T
Applications iVMS-4200, Hik-Connect
Archiving USB, Remote
Network protocols DDNS, DHCP, DNS, HTTPS, iSCSI, NFS, NTP, SADP, SMTP, TCP/IP, UPnP
Smart functions
Support for motion detection and VCA functions Yes
Additional functions ANR, POS
Others
Power supply DC V 12
DC W max. 40
Current drawn (no HDD and PoE) W max. 15
Operating temperature °C -10...+55
Permissible humidity % 95 or less (non-condensing)
Height U 1.5
Dimensions (W × D × H) mm 385 × 315 × 52
Weight kg 3