IP NVRs
Hikvision I Series
4K IP NVR: Hikvision DS-9632NI-I8 (32ch, 320Mbps, 8xSATA, 2xVGA, 2xHDMI, RAID) - Hikvision Project level
Code: K22362

The NVR undergoes Hikvision project rules.It means that the wholesale price of the NVR depends on the characteristics of the proposed project and is subject to negotiation.
Key features:
- Monitor output resolution: HDMI1 up to 4K, VGA1 up to 2K, HDMI2/VGA2 up to 1080p
- Max total bandwidth (input/output): 320/256 Mbps (200/200 Mbps with RAID)
- Support for RAID 0/1/5/10
- Support for ANR, HotSwap, HotSpare
- Support for disk cloning to eSATA drive
- Synchronous playback of recordings directly from NVR: up to 4x 4K channels or up to 16x 1080p channels
- Support for H.265/H.264+/H.264/MPEG4 video compression
- Recording resolutions: 12MP, 8MP, 6MP, 5MP, 4MP, 3MP 1080P, UXGA, 720P, VGA, 4CIF, DCIF, 2CIF, CIF, QCIF
- Place for eight SATA HDDs, each up 10 TB, plus eSATA interface
- Possibility of continuous recording with special parameters in the case of specific events (only for Hikvision cameras)
- Intelligent searching of archives by alarm events (line crossing, area intrusion, face recognition etc.)
- 2 x USB 2.0, 1 x USB 3.0, KB, RS232 and RS485 interfaces
- Alarm inputs/outputs: 16/4
Hikvision DS-9632NI-I8 is a modern IP network video recorder capable of monitoring, recording and playing back images from 32 IP cameras of megapixel resolutions, up to 12 MP. This standalone NVR with two HDMI outputs (one of them with up to 4K resolution) and two VGA outputs can be directly connected to a monitor or television, without a need for an additional computer. The high processing power and increased input and output throughput of NVRs from I series is especially useful in the case of connecting cameras with 4 MP or higher resolutions.
The DS-9632NI-I8 NVR can be a part of system with automatically switching N+1 backup device. Such a system consists of a group of operating NVRs and a redundancy NVR that, in the case of a failure of any of the NVRs in the system, takes over its functions. After resuming the operation of the "original" NVR, the recordings will be synchronized. The redundancy NVR must have at least the same number of channels as the "largest" NVR normally working in the system. In the DS-9632NI-I8 NVR, the user can configure hard drives as redundant, read-only or read/write. The configuration can include limits of using the capacity of hard drives and assigning them for individual channels. During normal operation of the NVR, the user can replace hard drives that support data storage according to RAID 0/1/5/10. The disk drives can be switched on and off on demand. With ANR function (Automatic Network Replenishment), any compatible IP camera equipped with a memory card can record video data in the absence of network connection, and after its restoration the recordings will be synchronized with the NVR. This feature guarantees continuous recording, even in the event of some communication problems between the camera and the NVR.
The local recording and network transmission uses H.265, H.264+ or H.264 compression methods that provide very good image quality with relatively small bandwidth and disk space consumption. The H.265 and H.264+ compression methods are about two times more effective in comparison with H.264. This further saves network and memory resources.
Eight SATA ports enable the user to install 8 hard drives with total capacity up to 80 TB. Additionally, the NVR supports NAS (NFS) and SAN (iSCSI) disk arrays. In the case of disk space overflow, the newest data overwrites the oldest recordings. Built-in USB and eSATA ports allow for connecting external memory sticks or disk drives in order to copy some files.
Eight SATA ports enable the user to install 8 hard drives with total capacity up to 80 TB. Additionally, the NVR supports NAS (NFS) and SAN (iSCSI) disk arrays. In the case of disk space overflow, the newest data overwrites the oldest recordings. Built-in USB and eSATA ports allow for connecting external memory sticks or disk drives in order to copy some files.
IP CCTV systems based on Hikvision IP cameras and NVRs can be configured for continuous recording with special parameters in the case of specific events. Each channel can be configured individually in this aspect. It is possible to increase the frame and bit rates, independently of the continuous recording settings. After the occurrence of an event (motion detection, camera tampering etc), the NVR automatically switches to the event-recording mode (usually with higher parameters). During the rest of the time the recording is carried out in the continuous mode. The increased parameters just before and after the event allow to play back every second of the period with high detail and smoothness, while the recordings between events may have a much lower performance, taking significantly less space on the storage media.
HIKVISION NVRs in IP networks can be controlled via IVMS 4200 software. The software allows for configuration and management of NVRs/DVRs and IP cameras. The iVMS 4200 utility can remotely manage up to 256 NVRs/DVRs. The user accounts can have different access/management rights, from the highest level of "administrator" to individually limited "guest" levels.
iVMS-4500 is a mobile application for smartphones running Android, iOS or Windows Phone operating systems. It can be used for live monitoring and playback of images from DVRs, NVRs, IP cameras via Wi-Fi, 2G or 3G networks.
Specifications:
| Name/Model | Hikvision DS-9632NI-I8 |
| Code | K22362 |
| Video system | IP |
| NVR operating system | Embedded Linux |
| Number of channels | 32 |
| Max input data stream [Mbps] | 320 (200 with RAID) |
| Max output data stream [Mbps] | 256 (200 with RAID) |
| Max resolutions of HDMI and VGA outputs | HDMI 1: 4K (3840x2160) VGA 1: 2K (2560x1440) HDMI 2, VGA 2: 1080p (1920x1080) |
| Number or remote connections | up to 128 |
| HDD interfaces | 8 x SATA II |
| Max capacity of each HDD | 10 TB |
| eSATA | YES (1) |
| Support for RAID | RAID 0, RAID 1, RAID 5, RAID 10 |
| ANR function | YES |
| HotSwap function | YES (with RAID) |
| HotSpare function | YES |
| Simultaneous playback | Directly from NVR - max four 4K channels, 16x 1080p channels |
| Ethernet ports | 2 x RJ-45 10/100/1000 Mbps |
| Video compression | H.265/H.264+/H.264/MPEG4 |
| S.M.A.R.T. function | YES |
| Pentaplex | Simultaneous live monitoring, recording, playback, backup and remote access |
| System monitor | External alarm, motion detection, tampering, recording failure, disk failure, disk overflow, IP network failure, IP address conflict, unauthorized login attempt |
| Alarm actions | Start of recording, sound notification, email notification, monitoring center alert, PTZ preset tour |
| Supported camera brands | ACTI, Arecont, AXIS, Bosch, Brickcom, Canon, PANASONIC, Pelco, SAMSUNG, SANYO, SONY, Vivotek, ZAVIO, ONVIF lub PSIA |
| Recording modes | Continuous, schedule, manual, alarm triggered; Protection of selected recordings |
| Digital zoom | Any part of the image to full screen size |
| Protocols | TCP, UDP, RTP, DHCP, DDNS, SMTP, NTP, PPPoE, SADP, SNMP, NFS, iSCSI, UPnP, IPv6, ONVIF, PSIA, RTSP |
| Backup | External storage device via USB; PC or network drive via LAN, eSata |
| Client applications (Windows, Mac) | iVMS - 4200 (PCs) iVMS - 4500 (smartphones) |
| Audio inputs/outputs | 1 / 2 (two-way communication, no recording) |
| Alarm inputs/outputs | 16/4 |
| Other ports | 2 x USB 2.0, 1 x USB 3.0, RS-232, RS-485, KB (keyboard) |
| Mobile access | Android, Symbian, WindowsMobile, iPhone, BlackBerry |
| Compatible browsers | IE, Opera, Safari |
| Rack system | 19", 2U |
| Operating temperature range | -10°C ... 55°C |
| Power consumption | <30 W (without HDDs) |
| Supply voltage | 230 VAC |
| Dimensions | 445 x 470 x 90 mm (W x D x H) |
| Weight | < 10 kg |
4K IP NVR: Hikvision DS-9632NI-I8 (32ch, 320Mbps, 8xSATA, 2xVGA, 2xHDMI, RAID) - Hikvision Project level
Code: K22362
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE
















