This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

5/8 Multiswitch: Signal MP-0508L (active terrestrial TV)

Code: R6944508
This product is no longer available
Replacements
5/8 Multiswitch: Terra MR-508 (active terrestrial path, class A) Code: R70608
Multiswitch Signal MRP-508 (5-in/8-out, passive terrestrial TV path) Code: R68508
Estore: Library:

Support

Any questions or comments?

  • Write to us!

Details

5/4 Multiswitch: Signal MP-0504L (active terrestrial TV)
View of the multiswitch
5/4 Multiswitch: Signal MP-0504L (active terrestrial TV)
Top view
New family of Signal multiswitches has been designed for individual antenna systems installed in one-family houses or in small apartment houses etc. The biggest advantage of the new series is better isolation between inputs. The multiswitches have built-in compensation of cable attenuation. This eliminates the impact of cable attenuation with increasing frequency, guarantying the same signal level in the entire band. Additionally, they have a switch to power a preamplifier in the terrestrial TV path with 12 VDC.
The MP-0508L R6944508 multiswitch is equipped with LTE filter for cutting unwanted signals above channel 60 (791- 862 MHz) coming from LTE networks.
The device distributes signals from one satellite and terrestrial television to up to eight subscriber sockets. We can therefore connect up to eight single satellite receivers. If some receiver has a hard drive (PVR), its double tuner will need connection with two outputs of the multiswitch. Any unused output of the multiswitch must be terminated with 75 ohm resistor (R66205).
Signal multiswitches are very attractive offer for radial installations (one multiswitch, the signal distributed radially) up to 16 outlets, distributing signals from one, two or four satellites. They are ideal devices for one-family houses, small apartment houses etc. In DIPOL Library we show example diagrams of such installations.
For cascadable solutions - larger systems and/or lower terrestrial signals (requiring to use external RF amplifiers) - we recommend high-quality TERRA multiswitches. A lot of information on designing large multiswitch systems has been collected in Professional multiswitch systems.
Maximum output level 85 dB of the terrestrial path means in practice that the input signals should not exceed 82 dB. Signals with a higher level may overdrive transistor switches, blocking satellite signal.
The multiswitch is suitable for indoor use only.
The offer of Signal multiswitches also includes:
  • 5/4 multiswitch R6944504
  • 5/12 multiswitch R6944512
  • 5/16 multiswitch R6944516
    • as well as 9-input multiswitches with 5, 8, 12, and 16 outputs.
Specifications
Name Signal MP-0508L
Code R6944508
Frequency range (SAT)
 950-2150 MHz
Frequency range (terrestrial)
47-790 MHz
Number of inputs
 4 SAT (LNB...) + 1 TV (TERR.)
Number of outputs
 8
Gain
SAT
2 dB
TV
2 dB
Linearity
TV
 ±2 dB
SAT
 ±2 dB
Isolation Between H/V polarizations 28 dB
Between inputs
 TV/SAT 28 dB
SAT/SAT 30 dB
Between outputs 30 dB
Return loss
 TV input
 10 dB
SAT inputs 11 dB
Outputs
 10 dB
Max output level
 SAT: EN50083-3 101 dBµV
TV: EN50083-5 85 dBµV
Switching commands
 13 V / 18 V
Switching threshold voltage
 15±0.5 V
Total LNB current Max 600mA
Temperature range - 20ºC to + 50ºC
Supplying voltage 90-240 VAC; 40-60 Hz
Dimensions
 365x120x70 mm