7" Touch Screen Monitor: Hikvision DS-KH6320-WTE2-W (for 2nd gen. 2-wire video intercom)

DS-KH6320-WTE2-W is a modern touch monitor designed to control Hikvision second-generation video intercom systems in the 2-Wire standard. The monitor allows direct audio/video conversation with people at the door station and intercom communication between other monitors (indoor stations) installed in the system. This way, the users/residents can communicate one with another for free. The system is operated with a transparent and intuitive graphical interface. The monitor allows the user to connect and view images from IP cameras and gate stations at any time. It is also possible to capture a photo during a video call and record a short message if you miss a call. The built-in 2.4 GHz Wi-Fi module enables wireless connectivity. The panel is powered with 24 VDC via the 2-Wire trunk using the G74823 DS-KAD706 distributor. After connecting the distributor to the network via LAN, each supported device is assigned with its own IP address and is visible and configurable, as in the case of IP video intercoms.

There is often a need to replace the existing intercom (video) system with a newer one, offering greater functionality and quality. Such upgrade may require replacing the cabling, e.g. with twisted pair cables for IP systems. The Hikvision video intercom working in 2-Wire standard offers all the possibilities of an IP system. The construction of a small system consists in connecting the main unit (door station) to the G74823 DS-KAD706 distributor and monitor(s) by means of the 2-Wire bus. The 2-Wire bus allows for both powering the devices and establishing communication. The G74823 DS-KAD706 distributor also enables further expansion and connection of the system to a LAN.

Second generation 2-wire Hikvision IP video intercom systems are distinguished by attractive stylish design and high functionality. Modular design of the door station allows for selection of components depending on the installation requirements. It always includes a main unit for powering of other necessary modules and optional expansion modules (max. 8). Both, the main unit of IP video intercom G73652 DS-KD8003-IME1/EU and the main module G73644 DS-KD8003-IME2 of 2-wire system allow for further extension with the use of respective expansion modules.

The door/gate station can be expanded with the use of flush or surface frames for embedding 1, 2 or 3 module(s) – (DS-KD-XXX), which allows for easy extension of the system depending on the requirements.

The functionality and security of the system built with the DS-KH6320-WTE1/EU monitors can be improved by employing its functions of an alarm control panel. The monitor is equipped with 8 inputs for connecting sensors and 2 alarm outputs. Information about the violation of a given sensor can be transferred to the Hik-Connect mobile application. The ability to set zones and select several arming modes allows users to customize the system. The connected sensors/detectors can work in NO or NC modes and the inputs of the monitor can react immediately, with a delay, or according to a schedule.

The of the IP video door system can be configured using the iVMS 4200 (v3) client software. The iVMS 4200 client software enables users of HIKVISION devices, such as IP DVRs/NVRs, TurboHD DVRs, video door systems to manage them in IP networks. The software allows for remote configuration and management of the devices. In the case of operating video intercom systems, it is possible to open doors remotely, record the video from the camera, take snapshots, make voice calls to the subscriber monitor(s). The application can also send text notifications with snapshots to the subscriber(s). Any information can be transferred easily and quickly, for example the user of the door station can directly call the monitoring center (iVMS-4200) and establish connection with the security staff.

Hikvision devices can be operated via mobile phones with Android or iOS using the dedicated Hik-Connect mobile application. It can be used for remote live viewing from DVRs, NVRs, IP cameras, video intercoms over the WiFi, 2G or 3G and to view saved recordings. Operating video intercoms with the application provides also remote opening of the electric strike, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the subscriber. The application supports connectivity over IP and a P2P cloud. Hik-Connect is also the name of the cloud service that provides access to devices in the absence of an external IP address.