This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

9/16 Multiswitch: Signal MP-0916L (active terrestrial TV)

Code: R6944816
This product is no longer available
Replacements
9/16 Multiswitch: Terra MR-916L (active terrestrial path, class A) Code: R70816
Estore: Library:

Support

Any questions or comments?

  • Write to us!

Details

5/4 Multiswitch: Signal MP-0504L (active terrestrial TV)
View of the multiswitch

5/4 Multiswitch: Signal MP-0504L (active terrestrial TV)
Top view
New family of Signal multiswitches has been designed for individual antenna systems installed in one-family houses or in small apartment houses etc. The biggest advantage of the new series is better isolation between inputs. The multiswitches have built-in compensation of cable attenuation. This eliminates the impact of cable attenuation with increasing frequency, guarantying the same signal level in the entire band. Additionally, they have a switch to power a preamplifier in terrestrial TV path with 12 VDC.
The MP-0916L R6944816 multiswitch is equipped with LTE filter for cutting unwanted signals above channel 60 (791- 862 MHz) coming from LTE networks.
The device distributes signals from two satellites and terrestrial television to up to sixteen subscriber sockets. It has been designed for one-family houses and small apartment buildings. We can therefore connect up to sixteen single satellite receivers. If some receiver has a hard drive (PVR), its double tuner will need connection with two outputs of the multiswitch. Any unused output of the multiswitch must be terminated with 75 ohm resistor (R66205).
Signal multiswitches are very attractive offer for radial installations (one multiswitch, the signal distributed radially) up to 16 outlets, distributing signals from one, two or four satellites. They are ideal devices for one-family houses, small apartment houses etc. In DIPOL Library we show example diagrams of such installations.
For cascadable solutions - larger systems and/or lower terrestrial signals (requiring to use external RF amplifiers) - we recommend top-quality TERRA multiswitches. A lot of information on designing large multiswitch systems has been collected in Professional multiswitch systems.
Maximum output level 85 dB of the terrestrial path means in practice that the input signals should not exceed 82 dB. Signals with a higher level may overdrive transistor switches, blocking satellite signal.
The multiswitch is suitable for indoor use only.
The offer of Signal multiswitches also includes:
Specifications
Name Signal MP-0816L
Code R6944816
Frequency range (SAT)
 950-2150 MHz
Frequency range (terrestrial)
47-790 MHz
Number of inputs 8 SAT LNB...) + 1 TV (TERR.)
Number of outputs 16 (REC...)
Gain
SAT
 2 dB
TV
 2 dB
Linearity
TV
 ±2 dB
SAT
 ±2 dB
Isolation Between H/V polarizations
 28 dB
Between inputs
 TV/SAT 28 dB
SAT/SAT 30 dB
Between outputs
 30 dB
Return loss
 TV input
 10 dB
SAT inputs
 11 dB
Outputs 10 dB
Max output level
 SAT: EN50083-3 101 dBµV
TV: EN50083-5 85 dBµV
Switching commands 13 V / 18 V
Switching threshold voltage 15±0.5 V
Total LNB current Max 600 mA
Temperature range
 - 20ºC to + 50ºC
Supplying voltage 90-240 VAC; 40-60 Hz
Dimensions
 565x120x70 mm