Support
Details
Sunell SN-NVR10/02E2/008NSE is a modern IP network video recorder capable of monitoring, recording and playing back images from 8 IP cameras at frame rates up to 25 fps from each camera, with 36 Mbps limit on the total recording bandwidth. This standalone NVR with VGA and HDMI outputs can be directly connected to a monitor, without a need for an additional computer. Thanks to embedded Linux OS, the NVR ensures stable operation and resistance to computer viruses.
The local recording and network transmission uses H.264 compression that provides good image quality with relatively small bandwidth and disk space consumption. There is place for two SATA HDDs with total capacity up to 8 TB. In addition, the NVR supports NAS. Built-in USB ports can be used for control of the NVR via external devices and for connecting a USB storage device.
The remote access to the NVR is possible via a web browser or dedicated InView (IMS) software for Windows OS. Free NVR InView app available in Google Play enables users of Android devices to monitor the NVR on the go.
A clear and intuitive menu of the NVR allows even novice users to configure and operate the system in an easy and effective way. The configuration options include network settings, searching for cameras and the setup of their parameters, configuring data streams, configuring motion detection and recording schedule etc. Two LAN ports allow for the division of the system into two separate networks, one for the incoming and the second for the outgoing streams.
A clear and intuitive menu of the NVR allows even novice users to configure and operate the system in an easy and effective way. The configuration options include network settings, searching for cameras and the setup of their parameters, configuring data streams, configuring motion detection and recording schedule etc. Two LAN ports allow for the division of the system into two separate networks, one for the incoming and the second for the outgoing streams.
The maximum number of simultaneous connections to the NVR is 4. Each user can monitor up to four cameras (out of 8 channels) and play back recorded video from one channel.
Distinguishing features
- total recording bandwidth: 36 Mbps (4.5 Mbps per channel)
- flash technology - remote operation via IE, Google Chrome, Opera, Safari
- HDMI, VGA outputs ( VGA: 1600 x 1200, 1280 x 1024, 1024 x 768, HDMI: 1920 x 1080, 1280x720)
- supported recording resolutions: 5MP, 3MP, 1080P, 720P, D1
Recording and playback
- recording according to a schedule or triggered by motion detection
- independent recording parameters for each channel
- pre- and post-alarm recording option
- individual image settings for each channel
- option of overwriting existing data (full disk)
- local synchronous playback from four 1080p/720p channels or eight D1 channels
- digital zoom
Networking
- two LAN adapters - LAN1, LAN2 - 10/100 Mbps
- support for TCP/UDP, ONVIF, HTTP, DHCP, DNS protocols
- remote configuration and operation; browsing, downloading and archiving recordings
- control of PTZ Sunell cameras in LAN
- remote monitoring of NVR status, alarm events, system log.
Specifications:
Name/model | SN-NVR10/02E2/008NSE |
Code | K2508 |
Manufacturer | Sunell |
NVR OS | Embedded Linux 2.6 |
Number of channels | 8 |
Support for megapixel cameras | Yes |
Total recording bandwidth | 36 Mbps (4.5 Mbps na kanał) |
HDD interface | 2xSATA II (max 8TB) |
Pentaplex | Live monitoring, recording, playback, archiving and remote access at the same time |
Live monitoring | 1x 1080P/720P/D1 4x 1080P/720P/D1 D1 in 2/4/8/9 screen division |
Max number of simultaneous connections | 4 |
Remote monitoring and playback | Monitoring: max 8 channels (shared among all users; one user: max 4 channels) Playback: 1 channel |
Local synchronous playback | 4 channels |
Video compression | H.264 |
Ethernet | 2 x RJ45 10M/100 Mbps |
Audio compression | G711_A, G711_U |
Audio IN/OUT | Yes, 3.5 mm jacks |
Recording modes | Continuous, schedule, manual, alarm-triggered |
Digital zoom | Yes |
Protocols | TCP/UDP, ONVIF,HTTP, DHCP, DNS |
Backup | NAS, USB,LAN |
Remote access | Internet browser, IMS (app for Windows PCs), NVR InView (Android) |
Video outputs | HDMI, VGA |
Other connectors | 2 x USB 2.0, RS485 |
AC/DC adapter (output) | 12 VDC / 5 A |
Compatible browsers | IE, Google Chrome, Opera, Safari, itp. |
Dimensions | 372 x 305 x 44.5 mm (W x D x H) |
Power consumption | 8 W |
Operating temperature range | -10°C...55°C |
Weight | 2.23 kg |
Specifications
Model | NVR1008 | ||
Product type | IP recorder | ||
type | Standard | ||
Brand | TP-Link VIGI | ||
Series | VIGI | ||
Parameters | |||
Number of channels | 8 | ||
Operating band | Input | MBps | 80 |
Output | MBps | 60 | |
Output modes | HDMI/VGA | Parallel | |
Max. output resolution | HDMI 1 | px | 1920 × 1080 |
VGA 1 | px | 1920 × 1080 | |
Coding/decoding | compression standards | H.265, H.264+, H.264 | |
synchronous playback | 4 channels | ||
max. decoding resolution | 1-channel @ 5 MP, 2-channel @ 2 MP, 4-channel @ 720p | ||
HDD | Number of SATA interfaces | 1 | |
max. capacity of each HDD | TB | 10 | |
USB | 2.0 | 2 | |
Ethernet | 1 × RJ-45 10/100 | ||
Applications | TP-Link VIGI, VIGI Security Manager | ||
Archiving | USB | ||
Network protocols | DHCP, DNS, NTP, TCP/IP, UPnP | ||
Smart functions | |||
Support for motion detection and VCA functions | Yes | ||
Others | |||
Power supply | DC | V | 12 |
DC | W | max. 18 | |
Operating temperature | °C | -10...+55 | |
Permissible humidity | % | 95 or less (non-condensing) | |
Dimensions (W × D × H) | mm | 246 × 148 × 42 | |
Weight | kg | 0,57 |