Access Point TP-LINK CPE510 (5GHz 802.11a/n MIMO2x2)

Code: N2352
This product is no longer available

Support

Details


The TP-LINK CPE510 outdoor 300 Mbps CPE device has been created in order to provide an efficient solution for outdoor wireless networks. It employs high-power transmitter with maximum output power of 27 dBm, sensitive receiver and integrated directional MIMO 2x2 antenna with 13 dBi gain. With a central management system, the CPE510 devices are ideal for point-to-point and point-to-multipoint Wi-Fi connections. The professional performance combined with ease of use make them a great choice both for business and home applications.
Key features:
  • Built-in directional MIMO 2x2 antenna with 13 dBi gain
  • Adjustable transmission power
  • Optimization for long-range links
  • TP-LINK Pharos MAXtream TDMA platform increases throughput and minimizes latency in point-to-multipoint applications
  • Centralized management system - Pharos Control
  • Access Point / Client / Repeater / AP Router / WISP operation modes
  • The included passive PoE adapter allows for placement of the device up to 60 meters from an AC outlet and for remote reset
Thanks to Qualcomm Atheros chipsets, high-gain antennas, high-quality materials, specially designed enclosure, and PoE technology, the CPE510 AP can reliably operate in most climate zones, from -30℃ to +70℃ . The advanced, high power transmitter (Tx output power up to 27 dBm / 500 mW) and highly sensitive receiver (Rx sensitivity up to -95 dBm) enable users to overcome the range barriers of traditional Wi-Fi networks.
The radiation pattern in vertical plane
The radiation pattern in horizontal plain
Along with increasing number of wireless devices in the area, the networking parameters worsen, due to the competition and collisions among the devices. To mitigate this problem, CPE510 uses TP-LINK MAXtream TDMA platform.
The specially designed outdoor AP is ideal for long-distance wireless links, even over distances longer than 15 km. Pharos Control software allows the administrator to easily manage all the CPE510 devices in the network from a single PC. The functions of the software include searching of the devices, monitoring of their statuses, firmware upgrading, network maintenance.
The comparison of the throughput of the network as a function of the number of wireless clients
(blue line - MAXtream TDMA, yellow line - 802.11 CSMA)

Specifications

Name Access point TP-LINK CPE510 5 GHz 802.11a/n MIMO 2 × 2
Model CPE510
Product type Outdoor access point
Operating frequency GHz 5
Manufacturer TP-Link
Series Pharos
Operating system Pharos
Interfaces
Ethernet ports 10/100 Mbps 2
w tym: PoE in 10/100 Mb/s 1
w tym: PoE out 10/100 Mb/s 1
Wireless transmission
Operating band GHz 5.15...5.85
standard WiFi 4 802.11n – 5 GHz
Operating mode AP, Client, WISP
Gain dBi 13
Transmission power dBm 27
MIMO 2 × 2
Transmission rate 5 GHz 300
Polarization Vertical
Radiation angle H º 45
V º 45
Protection WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP),64/128/152-bit encryption WEP
Additional wireless functions MAXtream TDMA Technology (Time Division Multiple Access)
Software and hardware properties
CPU CPU Qualcomm Atheros Enterprise AR9350B 560 MHz
RAM Mb 64
FLASH memory Mb 8
Enclosure IP rating IP65
ESD protection kV 15
Lighning protection kV 6
Management www, GUI, SNMP
Additional functions Spectrum analysis, Ping, Speed test, Traceroute, Antenna alignment, Wireless signal quality indicators
Device properties
Max. power consumption W 10,5
Power supply PoE Passive
voltage VDC 16...27
Dimensions mm 224 × 79 × 60
Mounting Mast
Certificates CE/FCC
Package content Manual, Access point, Mounting bracket, Power supply
Operating environment
Temperature operation -40...+70
storage -40...+70
Humidity air % 10...90
storage % 5...90