Access Point Ubiquiti NanoBeam M2 (18dBi 2.4GHz MIMO)

Code: N2532
€82.39
Price Disc. Quantity Validity
€82.39 0 % from 1 piece
Available
Nanobridge M2 is an integrated solution for building wireless bridges operating in 2.4 GHz band with the use of 802.11n MIMO 2x2 standard. Thanks to a unique construction, NanoBridge M2 offers unparalleled performance in such a compact device. The casing made of UV resistant plastic is resistant to even the most severe weather conditions. The device features built-in surge protection.

Warranty

1-year warranty.

Support

Details

NanoBeam M2 is an integrated solution for building wireless bridges operating in 2.4 GHz band with the use of 802.11n MIMO 2x2 standard. Thanks to a unique construction, NanoBridge M2 offers unparalleled performance in such a compact device. The casing made of UV resistant plastic is resistant to even the most severe weather conditions. The device features built-in surge protection.
Ubiquiti NanoBeam M2 can operate in Router or Bridge mode. Its wireless interface supports Access Point, Access Point WDS, Client, and Client WDS modes. The device is compatible with MikroTik RouterOS platform.
AirMax™ TDMA protocol allows for data transfer rates up to 150 Mbps, whereas the output power of the transmitter and sensitivity of the receiver is sufficient for wireless links over distances up to 20 km.

Specifications

Name Access point Ubiquiti NanoBeam M2 18dBi 2.4 GHz MIMO (PBE-M2-400)
Model PBE-M2-400
Product type Outdoor access point
Operating frequency GHz 2.4
Manufacturer Ubiquiti
Series PowerBeam
Interfaces
Ethernet ports 10/100 Mbps 1
w tym: PoE in 10/100 Mb/s 1
Wireless transmission
Operating band GHz 2.412...2.462
standard WiFi 4 802.11n – 2,4 GHz
Operating mode AP, AP router, Client, WISP
Gain dBi 18
Transmission power dBm 28
MIMO 2 × 2
Transmission rate 2.4 GHz MBps 300
Polarization Vertical or horizontal
Radiation angle H º 25
V º 25
Sensitivity 2.4 GHz dBm 1 – 24 MBps -97 dBm Min. ± 2 dB, 36 MBps 26 dBm ± 2 dB, 48 MBps 25 dBm ± 2 dB, 54 MBps 24 dBm ± 2 dB, MCS0 28 dBm ± 2 dB, MCS0 -96 dBm ± 2 dB, MCS1 28 dBm ± 2 dB, MCS2 28 dBm ± 2 dB, MCS3 28 dBm ± 2 dB, MCS4 27 dBm ± 2 dB, MCS5 25 dBm ± 2 dB, MCS6 23 dBm
Protection WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP),64/128/152-bit encryption WEP
Additional wireless functions airMAX
Software and hardware properties
CPU CPU Atheros MIPS 74Kc, 560 MHz
RAM Mb 64
FLASH memory Mb 8
Enclosure IP rating IP54
Management www, ssh
Additional functions Spectrum analysis, Access control, Bandwidth control, Multi-SSID z VLAN, Ping, Static routing, Speed test, Traceroute, Antenna alignment, IP and MAC address binding, Wireless signal quality indicators
Device properties
Max. power consumption W 6
Power supply PoE Passive
voltage VDC 24
Dimensions mm 420 × 420 × 289
Mounting Mast
Certificates CE/FCC
Package content Manual, Access point, Mounting bracket, Power supply
Operating environment
Temperature operation -40...+70
Humidity air % 5...95