AHD, HD-CVI, HD-TVI Signal Amplifier/Repeater VHD-15

Code: M1845
€41.49
Price Disc. Quantity Validity
€41.49 0 % from 1 piece
Temporarily unavailable
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable. A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type of cable used). So, one repeater will ensure good quality of video transmitted via twisted-pair cable over a total distance up to 300 m. The maximum distance can be further extended by the application of another device (up to 450 m), or even the third device (up to 600 m). In the case of using a coaxial cable, these distances will be correspondingly longer.
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113

Warranty

3-year warranty.

Support

Details

The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type of cable used). So, one repeater will ensure good quality of video transmitted via twisted-pair cable over a total distance up to 300 m. The maximum distance can be further extended by the application of another device (up to 450 m), or even the third device (up to 600 m). In the case of using a coaxial cable, these distances will be correspondingly longer.

Specifications

Model VHD-15
Product type Active video signal amplifier
Brand Delta
Input parameters number 1
connector type BNC and terminal strip for UTP cable
BNC impedance ohm 75
UTP impedance ohm 100
Supported signals and maximum resolution AHD 4 MP
Supported signals and maximum resolution HD-CVI 2 MP, 5 MP, WD1
Supported signals and maximum resolution HD-CVI 2 MP, 5 MP, WD1
Output parameters number 1
connector type BNC and terminal strip for UTP cable
BNC impedance ohm 75
UTP impedance ohm 100
Signal regeneration capability UTP cat. 5E m 150
RG - 59 300
RG - 6 500
Power supply parameters voltage DCV 8 .. 24
Current drawn mA <50
Dimensions mm 103 × 62 × 29
mm 103 × 62 × 29
Housing Plastic