Alpsat AS33-IPCX multifunctional CCTV tester (7", IP, HD-CVI/AHD/HD-TVI/CVBS, HDMI, PoE)

Code: M3214
€380.99 €476.24
Previous lowest price: €424.47
Price Disc. Quantity Validity
€476.24 0 % -
€380.99 20 % from 1 piece 2024-07-31
Available
Universal tool to facilitate the implementation, configuration and maintenance of CCTV systems and computer networks.
• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz, 5.8 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A

Warranty

2-year warranty.

Support

Details

Alpsat AS33-IPCX is a versatile tool that facilitates the implementation, configuration and maintenance of CCTV systems and computer networks. The meter is compatible with IP (up to 8 MP) and HD-CVI, HD-TVI (up to 8 MP) AHD (up to 5 MP) and CVBS cameras. Thanks to the monitor's high resolution, 1920 × 1200, you can view camera images in high quality, allowing you to fine-tune the most important settings. The large touchscreen and additional control buttons provide extremely user-friendly operation.
The built-in HDMI IN input allows you to connect an external device such as an NVR. This allows you to display video from this device and configure it locally. The HDMI OUT, on the other hand, allows you to connect the tester to an external monitor or other display.
With a built-in rechargeable battery, the device can operate for long periods of time (about 8-10 h) and provide a power source for other devices, offering the following outputs:
  • 2 × DC 12 V/3 A,
  • DC 24 V 2 A,
  • USB 5 V/2 A,
  • PoE (802.3 af/at, 24 W).
Key features:
  • Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight,
  • Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8-10 h operation,
  • Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS,
  • RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols),
  • Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters),
  • Possibility to simultaneously display images from up to 32 cameras,
  • Possibility to perform digital zoom (8x) of images from cameras,
  • Possibility to record video and snapshots of images from cameras on built-in memory,
  • HDMI signal input and output – possibility to display images from the NVR and connect an external monitor,
  • Wi-Fi support (2, 4 GHz, 5 GHz),
  • Physical function buttons,
  • Test of video, audio, data, network, Wi-Fi, PoE signals,
  • OTDR reflectometer (location of UTP cable break location),
  • Tester of UTP cables,
  • Creating test reports in pdf. format,
  • Built-in internal memory: 8 GB, microSD card support up to 128 GB
  • Built-in flashlight,
  • Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A (USB).
Key features:
Systems supported
The device supports cameras of different types and brands. The meter is compatible with IP cameras (up to 8 MP, automatic subnet adjustment, configurable parameters), as well as systems: HD-CVI, HD-TVI (up to 8 MP), AHD (up to 5 MP) and CVBS.
Tester, OTDR reflectometer for UTP cables
Cable test – detection of connection, continuity, maximum transmission speed
Cable OTDR test – measurement of length, detection of transmission pairs, breaks, cable quality.

WiFi tester
Support for 2.4 and 5 GHz networks.
Display of network data and statistics (frequency, channels, signal strength).

Built-in applications for testing IP cameras and DVRs:
  • IP-Discovery (One-click video) – automatic subnet adjustment for detected cameras, activation of devices and quick start of preview using Rapid Onvif,
  • Dedicated applications for device preview and configuration: Hikvision, Dahua, Uniview, Tp-Link, Tiandy, Xmeye, Ezviz and others,
  • Onvif XVR- displaying preview from 32 cameras simultaneously,
  • RTSP stream player,
  • Generation of virtual RTSP test stream (virtual IP camera),
  • RS-485 port data analyzer, control of PTZ cameras,
  • Built-in web browsers,
  • Audio output, built-in speaker,
  • Possibility to save recordings and snapshots on the device, HDMI video recording.
Net Tools – network test toolkit
  • IP network scanner,
  • Port scanner, send ICMP packets (PING),
  • IP tools – show busy IP addresses in subnet,
  • DHCP server,
  • NET-port Blinking – detect connected port in switch,
  • Network analysis (connection speed, packet loss, loop detection),
  • Continuous communication test with IP addresses, Traceroute – packet routing testing,
  • Network bandwidth testing,
  • Communication port test,
  • Network calculator,
  • Device search from a specific manufacturer.

PSE – PoE power supply tester
Detecting on which pairs the power supply is applied and its value.

Powering devices
Power output: PoE (802.3af/at), 2 × DC 2,1/5.5 (12 V, 2 A), USB (5 V, 2 A), DC 24 V 1 A.

Possibility to install Android software
Built-in internal memory: 8 GB, microSD card support up to 128 GB, USB memory.

HDMI input and output
Ability to display NVR video and connect an external monitor.

Built-in LED flashlight


Wireless display function
View video on other devices on the local network using a browser without installing add-ons.

Specifications

Model AS33-IPCX
Product type CCTV tester
Brand Alpsat
Color red
General
Operating system Android
Operation Touchscreen, Mouse (USB port), Function buttons
Network interfaces wired standard RJ-45 10/100/1000 (LAN)
wireless Yes, IEEE 802.11 b/g/n, 2.4 GHz, 5 GHz
Battery capacity Wh 51 (7,4 V, 7000 mAh)
Display
Type LCD, Touch
Screen type IPS
Matrix size 7
Maximum resolution 1920 x 1200
IP camera support
resolution maximum MP 8Mpx
Protocols Dahua, Ezviz, Hikvision, Tiandy, TP-Link, , Xmeye, Onvif
Image H.264/H.265 decoding, Recording, Live view, Zoom, Screenshots
Functions , , , ,
Obsługa kamer Analog HD
HD-CVI Max. rozdz 8Mpx (4K), brak obsługi 5Mpx - 16:9
HD-TVI 8Mpx (4K)
AHD 5Mpx
Przewody sieciowe Cable TDR test - pomiar długości, wykrywanie par transmisyjnych, przerw, jakości przewodów, Cable test - wykrywanie połączenia, ciągłości, maksymalnej szybkości transmisji, Tester, reflektometr TDR do przewodów UTP
Analiza sieci , , , IP tools – pokazywanie zajętości adresów IP w podsieci, , NET-port Blinking – wykrywanie podłączonego portu w switchu, , , , , , ,
PoE voltage test PSE - tester zasilania PoE,
RS-485 Pelco-P, Pelco-D oraz ponad 30 innych protokołów
Connectors
Power inputs DC 1x 12VDC
outputs DC 2 x DC 12 V / 3 A, DC 24V 2A, PoE (802.3 af/at, 24 W), USB 5 V / 2 A
Audio jack 1x input
USB 1x port, A type
Ethernet type RJ-45 1x RJ45 TDR, 2x 10/100/1000Mbps (1 LAN z PoE, 1 PSE)
Memory 1x microSD/microSDHC card slot (up to 128 GB)
HDMI 1x HDMI input (4K 30kl/s), 1x HDMI output
RS485 1x port
BNC
Others
Power supply Charger DC 12V 3A
battery 51 Wh (7,4 V, 7000 mAh)
Operating temperature °C -10...55
Permissible humidity
Dimensions (S x W x G) mm 230 x 140 x 45
Weight kg