English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
The AZS-02 separator supplies DC power to antenna amplifier/s in situations when it is not possible using a typical power supply with a built-in DC injector.
• Bandwidth: 5 - 1000 MHz
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
Outdoor three-input antenna branching filter, used as triplexer for combining signals from three antennas, installed on the mast carrying the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. Simple installation thanks to convenient plastic tie...
• Combining signals from three antennas
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering a preamplifier in UHF path
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering a preamplifier in UHF path
The ZA-204Ms C0342 triplexer is used for combining signals from three antennas: FM (87-110 MHz), VHF (174-230 MHz) and UHF (471-694 MHz), and is installed on the same mast that carries the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. A con...
• FM, VHF and UHF inputs
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in all paths, with auto-detection
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in all paths, with auto-detection
The ZA-106AMs C0345 masthead diplexer/combiner combines signals from an FM antenna (87-110 MHz) and a DVB-T antenna (174-230 MHz and 471-694 MHz). The housing of the diplexer has been specially prepared for outdoor operation and can be easily installed on a mast, with the included band clip.
• Inputs: FM, VHF/UHF
• Attenuation: 1 dB
• DC pass in VHF/UHF path (max. 24 V / 250 mA)
• Shielded body
• Mast-mounted, with band clip
• Type F connectors
• Attenuation: 1 dB
• DC pass in VHF/UHF path (max. 24 V / 250 mA)
• Shielded body
• Mast-mounted, with band clip
• Type F connectors
The ZA-112Ms antenna diplexer (3 inputs) is used as a combining element for VHF, UHF1 (max. 24 VDC/0,2 A), UHF2.
• Inputs: VHF, UHF1, UHF2
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors.
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors.
The ZA-106Ms C0373 diplexer is used for combining signals from two antennas, VHF (87-230 MHz) and UHF (471-694 MHz), and is installed on the same mast that carries the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. A convenient and simple in...
• Inputs: VHF, UHF
• Insertion loss: 1 dB
• Option for powering a preamplifier in UHF path (max. 24V/250mA)
• Shileded housing
• Easily-mountable on a mast, with plastic tie
• F connectors
• Insertion loss: 1 dB
• Option for powering a preamplifier in UHF path (max. 24V/250mA)
• Shileded housing
• Easily-mountable on a mast, with plastic tie
• F connectors
The ZA-206Ms C0374 diplexer is used for combining signals from two antennas, VHF (87-230 MHz) and UHF (471-694 MHz), and is installed on the same mast that carries the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. A convenient and simple in...
• New! Diplexer for combining DVB-T and DAB signals from VHF and UHF antennas
• Shielding of the circuitry
• LTE filter (> 700 MHz)
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in both paths, with auto-detection
• Shielding of the circuitry
• LTE filter (> 700 MHz)
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in both paths, with auto-detection
TV/SAT Combiner-splitter RS-01HsDCtv (indoor) enables summing up TV/SAT signals and send +12V DC power to a TV antenna.
• Used as a splitter-combiner for TV/SAT signals
• For indoor use
• Provides +12 V power to TV antenna and 14-18 V power to LNB
• Provided with a +12 V stabilizer in TV antenna power supply
• Attenuation <1.5 dB.
• For indoor use
• Provides +12 V power to TV antenna and 14-18 V power to LNB
• Provided with a +12 V stabilizer in TV antenna power supply
• Attenuation <1.5 dB.
The RS-02Ms combiner-splitter enables summing up TV/SAT signals. DC t blocking in TV path.
• Used as a splitter-combiner for TV/SAT signals
• For outdoor use
• Provides 14-18 V power to LNB
• Provided with a +12 V stabilizer in TV antenna power supply
• Attenuation <1.5 dB.
• For outdoor use
• Provides 14-18 V power to LNB
• Provided with a +12 V stabilizer in TV antenna power supply
• Attenuation <1.5 dB.
TV/SAT Combiner-splitter RS-02Ms DCTV (outdoor) enables summing up TV/SAT signals and send +12V DC power to a TV antenna.
• Used as a splitter-combiner for TV/SAT signals
• For outdoor use
• Provides +12 V power to TV antenna and 14-18 V power to LNB
• Provided with a +12 V stabilizer in TV antenna power supply
• Attenuation <1.5 dB.
• For outdoor use
• Provides +12 V power to TV antenna and 14-18 V power to LNB
• Provided with a +12 V stabilizer in TV antenna power supply
• Attenuation <1.5 dB.
