English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The ZA-104Ms diplexer (3 inputs) is used as a combining element for FM, VHF and UHF band signals (max. DC 24 V/0.2 A).
• Inputs: FM, VHF, UHF
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/ 200mA)
• Shielded housing
• Mounting on mast with cable tie
• F type connectors
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/ 200mA)
• Shielded housing
• Mounting on mast with cable tie
• F type connectors
The ZA-204Ms crossover (3 inputs) is used as a combining element for FM, VHF and UHF band signals (auto DC 12 V/0.6 A).
• Inputs: FM, VHF, UHF
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/100 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/100 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
The ZA-106AMs crossover (2 inputs) is used as a summing element for FM and VHF/UHF band signals.
• Inputs: FM, VHF/UHF
• Attenuation: 1 dB
• Current pass-through in VHF/UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of clamp
• F-type connectors
• Attenuation: 1 dB
• Current pass-through in VHF/UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of clamp
• F-type connectors
The ZA-112Ms antenna diplexer (3 inputs) is used as a combining element for VHF, UHF1 (max. 24 VDC/0,2 A), UHF2.
• Inputs: VHF, UHF1, UHF2
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors
The ZA-106Ms diplexer (2 inputs) is used as a combining element for VHF and UHF band signals (max. DC 24 V/0.25 A).
• Inputs: VHF, UHF
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of a clamp
• F type connectors
• Attenuation: 1 dB
• Current pass-through in UHF path (max. DC 24 V/250 mA)
• Shielded housing
• Mounting on mast by means of a clamp
• F type connectors
The ZA-206Ms crossover (2 inputs) is used as a combining element for VHF (auto. DC 12 V/0.6 A) and UHF (auto. DC 12 V/0.6 A) band signals.
• Inputs: VHF, UHF
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/60 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
• Attenuation: 1 dB
• Auto DC circuit on all inputs (12 V/60 mA)
• Shielded housing
• Mounting on mast with cable tie
• F-type connectors
The RSI-02Ms R85315 operates as a combiner or splitter of broadcast signals in the frequency range 47-862 MHz.
• Shielded housing
• Rubber covers for F-plugs
• Pole mounting with cable tie
• Current pass between one of the outputs and the input (max. 24 V/250 mA)
• Can operate as a combiner or splitter
• Rubber covers for F-plugs
• Pole mounting with cable tie
• Current pass between one of the outputs and the input (max. 24 V/250 mA)
• Can operate as a combiner or splitter
