English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
€1.13
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €1.13 | 0 % | from 1 piece |
Available
The E8279 angular BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• Perfectly matched to RG-6 cables
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
Details
The E8279 angular BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The inner conductor of the cable inserted into the inlet is centered and stopped. A special element ensures proper contact, which eliminates interferences when the cable is moved.
The MASTER BNC 6 E8279 connector is intended for the following cables:
Key features
- wide operating band,
- connecting/disconnecting operations do not influence connection quality (can be even used in measurement equipment),
- very low loss in the whole operating band,
- perfect matching to the transmission line within the whole operating band,
- simple and quick assembly: longitudinal compression,
- properly compressed connection is highly resistant to break, due to dual compression rings,
- matched to the cables of RG-6 family,
- many patented technologies.
The installation should be performed with the use of the E80078 compression tool.
A very good tool for preparing cable ends is the insulation stripper E8010.
The mounting of the connector is a quick and easy job:
- prepare the end of the cable uncovering the inner conductor at the length of 8 +/-1.4 mm and the dielectric with braid at the length of 6.4 mm
- fold back the braid over the cable sheath
- slip the end of the cable into the connector
- compress the connector onto the cable with the compression tool
Specifications
| Product type | Plug | ||
| connector type | BNC | ||
| Brand | MASTER | ||
| Installation | Compression | ||
| Cable family | RG-6 Dipolnet | ||
| Angled connector | Yes | ||
| Specyfikacja techniczna | |||
| Impedance | Ohm | 75 | |
| Frequency range | MHz | 5...2400 | |
| Shielding class | A | ||
| Material | Basic | Brass 360 | |
| Finishing | Nickel | ||
| Dimensions | Outer diameter | mm | 10.8 |
| Inner diameter | mm | 8.4 | |
| Inner sleeve diameter | mm | 4.83 | |
| Preparation of the cable | center core | mm | 6.5 |
| Dielectric | mm | 4.5 | |
| shield | mm | 4.5 | |
