English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
€10.46
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €10.46 | 0 % | from 1 piece |
Available
The ZA-112Ms antenna diplexer (3 inputs) is used as a combining element for VHF, UHF1 (max. 24 VDC/0,2 A), UHF2.
• Inputs: VHF, UHF1, UHF2
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors.
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors.
Details
The ZA-112Ms triplexer is used for combining signals from three antennas (bands) and is installed on the same mast that carries the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. A convenient and simple installation with the included plastic tie. The UHF1 input (marked by * in the table below) can inject DC power for an preamplifier mounted in a UHF antenna connected to this input.
The triplexer has two UHF inputs and FM+VHFIII input, allowing for combining signals from two UHF antennas (DVB-T) and antenna(s) receiving FM/DAB+ and DVB-T signals within 87-230 MHz range.
A high-cut filter (above 694 MHz) blocks interference from LTE networks.
Specifications
| Product type | Terrestrial TV diplexer | ||
| Name | ZA-112Ms | ||
| Manufacturer | AMS | ||
| Number and type of inputs | 1 × VHF | ||
| Operating band | MHz | UHF: 470 – 694, VHF: 170 – 230 | |
| Loss | dB | 1 | |
| Separation | dB | > 40 | |
| Connector type | F | ||
| DC pass-through | UHF | Yes – 1 input | |
| VHF | No | ||
| voltage/current | V/mA | 24/200 | |
Related products
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [200m]](https://www.dipolnet.ro/img/thumbnails/e1017_200+.jpg/c9c81b6521075a285f88726b86d7ebb1.jpg)
