This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Antenna mast 38 mm/1.5 m stainless steel (INOX), C system

  2. Assembly Components
  3. Tubular masts
Code: E9038154
€28.17
Price Disc. Quantity Validity
€28.17 0 % from 1 piece
Available
The stainless steel (INOX) antenna mast with a length of 1.5 metres is made of 38 mm tube with a wall thickness of 1.5 mm.
• Steel mast INOX
• Length 1.5 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Can be combined
Estore: Library: , .

Warranty

3-year warranty.

Support

Any questions or comments?

  • Write to us!

Details

The stainless steel (INOX) antenna mast with a length of 1.5 metres is made of 38 mm tube with a wall thickness of 1.5 mm. The steel from which the mast is made is ground and then satin-finished, so that the final visual effect is much better than in the case of elements made of raw stainless steel. A plastic plug is installed on the underside of the mast.
Mast weight 2.1 kg
Connecting masts into a single permanent whole
38mm/1.0 m hot-dip galvanized steel antenna mast that can be combined /system A/
Special embossments at the tip make it possible to connect elements.
The mast has been designed in such a way that it can be combined into a larger whole. Thanks to special embossing at the ends of the mast, it is possible to join the elements using a 9 cm long groove system by knocking in another segment in such a way that the embossing overlaps. Once joined, it is not possible to disconnect the segments.
Being able to join masts together is particularly important because:
  • it enables cheap and easy shipment (delivering a long mast is often very expensive or impossible)
  • shorter elements are much easier to transport by car and take up to the roof
  • it makes it possible to adjust mast height to specific needs
The maximum height of the composite mast depends on:
  • the selected safety coefficient
  • the weight and surface area (wind resistance) of suspended elements
  • the antenna arrangement (larger antennas should be placed at the bottom)
  • the type and rigidity of the wall/chimney clamp
  • the type and number of additional anchoring clamps
Other mounting elements made of stainless steel are also available:

Specifications

Product type Mast
Material Stainless steel
braid coverage INOX
Mast joining system C
Length m 1.5
Diameter mm 38
Wall thickness mm 1.5
Weight kg 2.1