ARA 1/2F Active Antenna Splitter

Support

Details

The active signal multiplexer can be used in cable networks or MATV installations. It is advised to use it if a passive splitter causes the signal level is too low. The device has two F outputs.
Security measures
The ARA-1/2F splitter is fed from the external stabilized power supply making the full set. It is not designed for use in open spaces. It cannot be installed in wet conditions or near heaters and similar equipment. Providing natural ventilation is a must - the supplier must not be covered by any object. To avoid any possible damage, power should not be switched on until all connections are properly made.

Specifications

Product type Home repeater
Model ARA-1/2F
Brand AMS
type RF TV/CATV
Applications Indoor
Operating band FM/VHF/UHF
Inputs/Outputs Number of inputs 1
No. of outputs 2
DC 0/12 V switch No
Gain control No
Parametry wzmocnienia
Input 1 Frequency 40...862
Gain dB 8...12
Preamplifier power supply V/A None
Precorrection of cable characteristics No
Device specifications
Max. output level dBµV 88
Inner noise VHF dB 2
UHF dB 2
Die-cast enclosure Yes
Signal connector type F
RF test output No
Operating temperature °C -20...+50
Dimensions mm 90 × 40 × 25
Weight kg 0,1