English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Solution for "slow" Internet, caused by weak LTE network signal. Swapping an OEM antenna for a professional, external one, significantly improves LTE signal level, which boosts data transmission speeds. In this movie, TP-Link Archer MR200 LTE router was connected to ATK-LOG ALP LTE MIMO 2x2 Antenna.
€85.88
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €85.88 | 0 % | from 1 piece |
Available
Replacements
Antenna for receiving and transmitting signals in the 698-3800 MHz band. It has 9 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-3800 MHz
• Gain: 9 dBi
• VSWR <1.83
• Impedance 50 Ω
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
• Gain: 9 dBi
• VSWR <1.83
• Impedance 50 Ω
• MIMO directional antenna
• Cable length: 10 m
• SMA connectors
Details
The MIMO antenna consists of two identical units - one of them should be mounted vertically, the second - horizontally. The distance between the units should be at least 37 cm.
The ATK-LOG ALP 5G MIMO logarithmic antenna is designed for use in GSM/DCS/UMTS/HSDPA/LTE/5G systems operating in the 698-3800 MHz range. It effectively solves the common problem of inadequate signal strength at the installation location of a modem with a GSM/UMTS/LTE/5G card. If this is the case, it is usually enough to connect an antenna to the modem to achieve a sufficient signal strength. In addition to that, the antenna has 2 cables with a length of 10 meters, terminated with an SMA plug.
The antenna is designed to work with LTE/5G modems (equipped with two antenna connectors), telephones and GSM, DCS, 3G, LTE, 5G modems.
MIMO (Multiple Input, Multiple Output) – is a method for multiplying the capacity of a radio link using multiple transmitting and receiving antennas to exploit multipath propagation.
Distinguishing features:
- Frequency range: 698-3800 MHz,
- Gain: 9 dBi,
- Cable length: 10 m,
- SMA plug,
- VSWR: max 1.83,
- MIMO technology,
- DC-shorted,
- X-cross polarization.
The parameters of the antenna have been tested by the staff of the Department of Electronics at the AGH University of Science and Technology in Krakow.
Antenna reflection coefficient chart
Gain vs. frequency characteristics
Gain of an antenna designed for the frequency 698 MHz.
Gain of an antenna designed for the frequency 830 MHz.
Gain of an antenna designed for the frequency 960 MHz.
Gain of an antenna designed for the frequency 1.71 GHz.
Gain of an antenna designed for the frequency 2.2 GHz.
Gain of an antenna designed for the frequency 2.7 GHz.
Gain of an antenna designed for the frequency 3.3 GHz.
Gain of an antenna designed for the frequency 3.5 GHz.
Gain of an antenna designed for the frequency 3.8 GHz.
Specifications
| Name | ATK-LOG ALP MIMO antenna | ||
| Product code | A7064_10 | ||
| Product type | Communication antenna | ||
| type | transmission technology | MIMO antenna 2 × 2 | |
| directionality | Directional | ||
| Cable | Length | m | 10 |
| no. of cables | 2 | ||
| cable type | RF-5 | ||
| Connector | type | SMA | |
| number | 2 | ||
| Applications | LTE700, 5G (700 MHz), LTE800 (800 MHz), GSM900, UMTS900, LTE900 (900 MHz), LTE1800 (1800 MHz), LTE2100, UMTS2100 (2100 MHz), LTE2600 (2600 MHz), 5G (3,4 – 3,6 GHz) | ||
| Manufacturer | DIPOL | ||
| Brand | DIPOL | ||
| Applications | outdoor | ||
| Operating band | MHz | 698-960, 1700-2700, 3300-3800 | |
| Max. gain | dBi | 9 | |
| Impedance | Ohm | 50 | |
| Radiation angle | vertical polarization | H/V° | 100/75 |
| horizontal polarization | H/V° | 75/100 | |
| Polarization | H,V, X-Cross | ||
| DC-shorted | Yes | ||
| VSWR | <1.83 | ||
| Max. mast diameter | mm | 45 | |
| Dimensions | mm | 250 × 230 × 120 | |
| Packaging | Cardboard box | ||
| Weight | kg | 1.6 | |
