English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Solution for "slow" Internet, caused by weak LTE network signal. Swapping an OEM antenna for a professional, external one, significantly improves LTE signal level, which boosts data transmission speeds. In this movie, TP-Link Archer MR200 LTE router was connected to ATK-LOG ALP LTE MIMO 2x2 Antenna.
€82.07
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €82.07 | 0 % | from 1 piece |
Available
The ATK-LOG ALP LTE MIMO logarithmic antenna has been designed for use in GSM/DCS/UMTS/HSDPA/LTE systems working in 800-3000 MHz range. It effectively solves the problems of inadequate signal level which often occurs in the case of modems/devices with built-in antennas. Each of the 10-meter cables is terminated with FME-female connector that can be directly connected to the cellular device.
• Logarithmic MIMO antenna for LTE
• Frequency range: 800-3000 MHz
• Gain: up to 9 dBi
• VSWR: max 1.7
• 10-meter cable terminated with FME socket
• DC short-circuited
• Frequency range: 800-3000 MHz
• Gain: up to 9 dBi
• VSWR: max 1.7
• 10-meter cable terminated with FME socket
• DC short-circuited
Details
The MIMO antenna consists of two identical units - one of them should be mounted vertically, the second - horizontally. The distance between the units should be at least 37 cm.
The ATK-LOG ALP LTE MIMO logarithmic antenna has been designed for use in GSM/DCS/UMTS/HSDPA/LTE systems working in 800-3000 MHz range. It effectively solves the problems of inadequate signal level which often occurs in the case of modems/devices with built-in antennas. Each of the 10-meter cables is terminated with FME-female connector that can be directly connected to the cellular device.
The antenna has been designed for use with LTE modems (with two antenna connectors), cell phones, GSM, DCS, 3G modems.
View of the FME socket terminating each of the coaxial cables
MIMO (Multiple Input, Multiple Output) – is a method for multiplying the capacity of a radio link using multiple transmitting and receiving antennas to exploit multipath propagation.
Distinguishing features:
- Frequency range: 800-3000 MHz,
- Gain: up to 9 dBi,
- Cable length: 10 m,
- FME socket,
- VSWR: max 1.7,
- MIMO,
- DC short-circuited.
The parameters of the antenna have been tested by the staff of the Department of Electronics at the AGH University of Science and Technology in Krakow.
Radiation patterns in horizontal plane
Radiation patterns in vertical plane
VSWR versus frequency
Gain vs. frequency characteristics
Specifications
| Name | ATK-LOG ALP LTE antenna | ||
| Product code | A7055_10 | ||
| Product type | Communication antenna | ||
| type | transmission technology | MIMO antenna 2 × 2 | |
| directionality | Directional | ||
| Cable | Length | m | 10 |
| no. of cables | 2 | ||
| cable type | RF-5 | ||
| Connector | type | FME | |
| number | 2 | ||
| Applications | LTE800 (800 MHz), GSM900, UMTS900, LTE900 (900 MHz), LTE1800 (1800 MHz), LTE2100, UMTS2100 (2100 MHz), LTE2600 (2600 MHz) | ||
| Manufacturer | DIPOL | ||
| Brand | DIPOL | ||
| Applications | outdoor | ||
| Operating band | MHz | 800-3000 | |
| Max. gain | dBi | 9 | |
| Impedance | Ohm | 50 | |
| Radiation angle | vertical polarization | H/V° | 76/66 |
| horizontal polarization | H/V° | 66/76 | |
| DC-shorted | Yes | ||
| VSWR | <1.7 | ||
| Max. mast diameter | mm | 45 | |
| Dimensions | mm | 260 × 230 × 120 | |
| Packaging | Cardboard box | ||
| Weight | kg | 1,4 | |
