This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

ATK-LOG ALP LTE MIMO 2x2 Antenna (800-3000MHz, 5m cables, SMA plug)

  2. Cellular Systems
  3. Antennas
  • View of the antenna
  • The included cable coming out from each of the two antenna units is 5 m long and is terminated with SMA plug
Code: A7054_5
€72.92
Price Disc. Quantity Validity
€72.92 0 % from 1 piece
Available
Replacements
Antenna TRANS-DATA LTE KYZ 10/10 + 5 m cable + SMA [698-960, 1710-2700 MHz] Code: A741024_5
The ATK-LOG ALP LTE MIMO logarithmic antenna has been designed for use in GSM/DCS/UMTS/HSDPA/LTE systems working in 800-3000 MHz range. It effectively solves the problems of inadequate signal level which often occurs in the case of modems/devices with built-in antennas. Each of the 5-meter cables is terminated with SMA plug that can be directly connected to the cellular device.
Estore: Library: , .

Warranty

3-year warranty.

Support

Any questions or comments?

  • Write to us!

Details

The MIMO antenna consists of two identical units - one of them should be mounted vertically, the second - horizontally. The distance between the units should be at least 37 cm.
The ATK-LOG ALP LTE MIMO logarithmic antenna has been designed for use in GSM/DCS/UMTS/HSDPA/LTE systems working in 800-3000 MHz range. It effectively solves the problems of inadequate signal level which often occurs in the case of modems/devices with built-in antennas. Each of the 5-meter cables is terminated with SMA plug that can be directly connected to the cellular device.
The antenna has been designed for use with LTE modems (with two antenna connectors), cell phones, GSM, DCS, 3G modems.
MIMO (Multiple Input, Multiple Output) – is a method for multiplying the capacity of a radio link using multiple transmitting and receiving antennas to exploit multipath propagation.
Distinguishing features:
  • Frequency range: 800-3000 MHz,
  • Gain: up to 9 dBi,
  • Cable length: 5 m,
  • SMA plug,
  • VSWR: max 1.7,
  • MIMO,
  • DC short-circuited.
The parameters of the antenna have been tested by the staff of the Department of Electronics at the AGH University of Science and Technology in Krakow.
Radiation patterns in horizontal plane
Radiation patterns in vertical plane
VSWR versus frequency
Gain vs. frequency characteristics

Specifications

Name ATK-LOG ALP LTE antenna
Product code A7054_5
Product type Communication antenna
type transmission technology MIMO antenna 2 × 2
type directionality Directional
Cable Length m 5
Cable no. of cables 2
cable type RF-5
Connector type SMA
Connector number 2
Applications LTE800 (800 MHz), GSM900, UMTS900, LTE900 (900 MHz), LTE1800 (1800 MHz), LTE2100, UMTS2100 (2100 MHz), LTE2600 (2600 MHz)
outdoor
Manufacturer DIPOL
Brand DIPOL
Operating band MHz 800-3000
Max. gain dBi 9
Impedance Ohm 50
Radiation angle vertical polarization H/V° 76/66
Radiation angle horizontal polarization H/V° 66/76
Polarization H,V
DC-shorted Yes
VSWR <1.7
Max. mast diameter mm 45
Dimensions mm 260 × 230 × 120
Packaging Cardboard box
Weight kg 1.4

Videos

How to boost LTE signal?

  • 2021-07-09

Solution for "slow" Internet, caused by weak LTE network signal. Swapping an OEM antenna for a professional, external one, significantly improves LTE signal level, which boosts data transmission speeds. In this movie, TP-Link Archer MR200 LTE router was connected to ATK-LOG ALP LTE MIMO 2x2 Antenna.