BNC Connector MASTER BNC 59 (compressed on CAMSET/RG-59)

Code: E8275
€0.91
Price Disc. Quantity Validity
€0.91 0 % from 1 piece
Available
The E8275 monolithic BNC connector is made ​​of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• BNC Master connector for CCTV systems
• Wide operating band
• Matched to the cables of CAMSET family and RG-59 cables
• Very low loss in the whole operating band,
• Perfect matching to the transmission line within the whole operating band
• Many patented technologies

Warranty

4-year warranty.

Support

Details

The E8275 monolithic BNC connector is made ​​of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The inner conductor of the cable inserted into the inlet is centered and stopped. Special element ensures proper contact, which eliminates interferences when the cable is moved.
The MASTER BNC 59 E8275 compression connector is intended for the following cables:
Key features
  • wide operating band,
  • connecting/disconnecting operations do not influence connection quality (can be even used in measurement equipment),
  • very low loss in the whole operating band,
  • perfect matching to the transmission line within the whole operating band,
  • simple and quick assembly: longitudinal compression,
  • properly compressed connection is highly resistant to break, due to dual compression rings,
  • matched to the cables of CAMSET family and RG-59 cables with inner conductor diameters from 0.55 to 0.80 mm,
  • many patented technologies.
The connectors should be compressed with the E80075 compression tool.
To strip CAMSET cable, we recommend the e8010 insulation stripper.
The E8275 connector can be used with any RG-59 cables with diameters of inner conductors from 0.55 to 0.80 mm.
The mounting of the connector is a quick and easy job:
  • prepare the end of the cable uncovering the inner conductor at the length of 6.5 +/-1.4 mm and the dielectric with braid at the length of 7.5 mm
  • fold back the braid over the cable sheath
  • slip the end of the cable into the connector
  • compress the connector onto the cable with the compression tool
The professional compression BNC E8275 connector fulfills all recommendations of SCTE (The Society of Cable Telecommunications Engineers) for this kind of connectors.

Specifications

Product type Plug
connector type BNC
Brand MASTER
Installation Compression
Cable family RG-59/CAMSET
Specyfikacja techniczna
Impedance Ohm 75
Frequency range MHz 5...2400
Shielding class A
Material Basic Brass 360
Finishing Nickel
Dimensions Outer diameter mm 10,8
Inner diameter mm 7,63
Inner sleeve diameter mm 3,9
Preparation of the cable center core mm 6,5
Dielectric mm 7,5
shield mm 7,5