€16.44
Price | Disc. | Quantity | Validity |
---|---|---|---|
€16.44 | 0 % | from 1 piece |
Available
AI-200 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 318 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF bands, the levels of signals can be equalized. This makes it easier to build installations using a single cable to distribute signals from several antennas (combined in a diplexer etc).
Details
Application
AI-200 Amplifier is used as distributing device in small or private antenna installations, to ensure proper level of signal for multiple receivers. The amplifier works in 40 - 318 MHz and 470 - 862 MHz bands. Thanks to separate gain adjustment for VHF and UHF bands, the levels of signals can be equalized. This makes it easier to build installations using a single cable to distribute signals from several antennas (combined in a diplexer etc).
The amplifier can be used in community installations. Due to gap between VHF and UHF band (S20-S38) it cannot be used in typical cable TV systems. The amplifier is especially useful in situations where the signal is strong enough for one TV receiver, but there is a need to distribute it to the next televisions. In the case the original signal is too low, there should be used other Alcad amplifiers that allow to power preamplifiers, e.g. CA-210 R90460.
Security notice for amplifier users
AI-200 Amplifier is fed from internal stabilized power supply. It is not designed for use in open spaces. It cannot be installed in wet conditions or near heaters. Providing natural ventilation is a must. To avoid any possible damage, power should not be provided until all connections are properly made properly.
Specifications
Product type | Home repeater | ||
Model | AI-200 | ||
Brand | ALCAD | ||
type | RF TV/CATV | ||
Applications | Indoor | ||
Operating band | FM/VHF/UHF | ||
Inputs/Outputs | input count | 1 | |
number of outputs | 2 | ||
DC 0/12 V switch | No | ||
Gain control | Yes | ||
Parametry wzmocnienia | |||
Input 1 | Frequency | 40...318/470...862 | |
Gain | dB | 14 for FM/VHF, 24 for UHF | |
Gain control | dB | 0...16 for FM/VHF | |
Precorrection of cable characteristics | No | ||
Device specifications | |||
Max. output level | IMD3=60 dB (DIN45004B) | dBµV | 105 |
IMD2=60 dB (EN50083-3) | dBµV | 97 | |
Inner noise | VHF | dB | <4.5 |
UHF | dB | <3 | |
Signal connector type | F | ||
RF test output | No | ||
Power supply | V | AC 230/50-60 Hz | |
Power consumption | W | 7 | |
Operating temperature | °C | -20...+50 | |
Dimensions | mm | 78 × 118 × 47 | |
Weight | kg | 0.36 |