This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Buffer Power Supply: PSUPS10A12 (11-13.8VDC, 10A)

Code: M1874
This product is no longer available
Estore: Library:

Support

  • Write to us!

Details

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the power supply

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Rear view

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the inside
PSUPS10A12 M1874 buffer power supply has been designed for use in CCTV systems. It ensures the continuity of power supply for devices requiring stabilized DC voltage within 12 V +/-15% range. The power supply has two circuits, one (5 A) for a DVR, the second (8x 0.5 A) for CCTV cameras. In the case of a power failure, the circuits are immediately switched to battery power. For normal operation, the charging current can be adjusted by a jumper (the total output current cannot exceed 10 A).
The metal housing (color: RAL 9003) provides room for 12 V / 40 Ah rechargeable battery. The housing is equipped with micro-switches signaling opening the door and raising the device.
Distinguishing features:
  • uninterrupted 12 VDC power supply
  • 8 x 12 VDC, 0.5 A outputs dedicated for CCTV cameras
  • 12 VDC, 5 A output dedicated for a DVR
  • battery charging and maintenance system
  • protection against excessive discharge (can be disabled)
  • protection of BAT output against short circuit and reverse polarity connection
  • selectable battery charging current: 0.7 A, 2.1 A, 3.6 A, 4.8 A
  • autonomous battery operation option (START function)
  • LED indicators: AC (input), DC (output)
  • AC power failure output
  • device failure detection circuit
  • door opening and device lifting push-button switches
PSUPS10A12 M1874 buffer power supply is sold without rechargeable battery.
Specifications
Name PSUPS10A12
Code M1874
AC input
 230 V, 50/60 Hz
DC outputs
 11...13.8 V - buffer operation
10...13.8 V - autonomous operation
Rated output power
 138 W
Efficiency 72%
Outputs 8 x 0.5 A (cameras) + 1 x 5 A (DVR)
Total maximum current
 10 A
Battery charging current 0.7/2.1/3.6/4.8 A (selected with jumper)
Number of outputs
 8 (cameras) + 1 (DVR)
Max load of camera outputs
  0.5 A
Max capacity of rech. battery
 40 Ah
Short-circuit protection
 fuses
Overload protection
 automatic
Under Voltage Protection (UVP)
 automatic battery cut-off when U < 10 V (can be disabled)
Operating temperature -10...40°C
Dimensions (W x H x D) 400x440x170 mm
Weight 11.9 kg
Remarks Metal housing

Specifications

Nazwa PSUPS10A12
Kod M1874
Napięcie zasilania AC 230V 50-60Hz
Napięcie wyjściowe DC 11-13,8V - praca buforowa
DC 10-13,8V - praca bateryjna
Moc znamionowa 138W
Sprawność 72%
Wyjścia zasilania 8x0,5A (kamery) + 1x5A (rejestrator)
Maksymalny całkowity prąd zasilacza 10A
Prąd ładowania akumulatora [A] 0,7/2,1/3,6/4,8 przełączany zworką
Ilość wyjść 8 dla kamer, 1 dla rejestratora
Maksymalne obciążenie pojedynczego wyjścia dla kamer  0,5A
Miejsce na akumulator 40Ah max.
Zabezpieczenie przed zwarciem bezpiecznik topikowy
Zabezpieczenie przed przeciążeniem automatyczne
Zabezpieczenie przed nadmiernym rozładowaniam UVP automatyczne, U<10V -odłączanie akumulatora, możliwość konfiguracji
Temperatura pracy -10...40°C
Wymiary (szer. x wys. x głęb.) 400x440x170 mm
Masa 11,9 kg
Uwagi Obudowa metalowa