Carbon Monoxide Detector KIDDE 10LLDCO (LCD display, built-in battery)

Code: G9589
This product is no longer available
Estore: Library:



Carbon Monoxide Detector KIDDE 10LLDCO (LCD display, built-in battery)
The Kidde 10LLDCO carbon monoxide detector with LCD display is used for continuous monitoring of premises exposed to the danger of this poisonous gas. The detector has been equipped with a new generation electrochemical CO sensor with a 10-year lifespan and a built-in battery with the same service life. The device has LCD display showing the level of carbon monoxide in the range of 0 to 999 PPM. The CO concentration is measured every second. The sensor is equipped with optical (red LED) and acoustic signaling (85 dB pulsating alarm sound) which automatically starts when a threat is detected. Test / Reset button on the front panel is used for verifying all functions of the detector and stopping alarms. By pressing another button the user can read the peak (maximum) value of CO concentration stored in the memory of the detector.
Self-diagnostic circuitry of the detector constantly monitors the condition of the sensor, battery and internal circuits - the device informs the user about problems by warning sounds and relevant pieces of information. Thanks to the fact that the unit is battery-powered, it is independent from the AC power network and can be installed in any suitable place. The device is wall-mountable or can be placed on a flat surface. After 10-year protection period the unit will inform users about the necessity of replacing it with a new one.
  • One of the world's most precise electrochemical CO sensors,
  • Ca. 43% longer lifespan compared to most CO detectors available in the market,
  • LCD display with 0...999 PPM range,
  • Built-in battery for the whole service life, independence from AC power network,
  • Additional LED signalling malfunction,
  • Loud alarm sound,
  • Test / Reset button to control the device,
  • Peak value button
  • Low battery, error and end of product life alarms,
  • Wall mountable (can also be placed on a flat surface),
  • Lock preventing removal of the detector from the wall (e.g. by children),
  • Ergonomic and tough casing,
  • Very low cost of operation, no need for battery echange
  • BSI certificate confirming compliance with EN50291-1:2010,
  • Easy to mount and operate,
  • 10-year warranty, including battery.
CO alarm threshold levels and alarm activation times are compliant with EN 50291-1:2010:
  • 30 PPM - no alarm before 120 minutes
  • 50 PPM - alarm between 60-90 minutes
  • 100 PPM - alarm between 10-40 minutes
  • 300 PPM - alarm within 3 minutes
The detector has the certificate of compliance with EN 50291-1: 2010 for home CO detectors. The compliance has been confirmed by an independent research unit - British Standard Institute (BSI).
Code G9589
Category Carbon monoxide detector
Autonomous operation
Sensor type
Optical indication
Red LED, indication of the detected concentration on the LCD
Sound alarm 85 dB
Environment humidity range Up to 90% RH (no condensation)
Power Built-in battery for the whole service life
Low battery warning
Lo info on the LCD, short sound every 60 seconds, flashing orange LED
Malfunction indication
Err info on the LCD, short sound every 30 seconds, flashing orange LED or continuous alarm with "dead" LCD
End of life indication End info on the LCD, two short sounds every 30 seconds, flashes of orange LED every second
LCD indications
Real-time CO concentration measurements within 0 - 999 PPM range
Lo - low battery
Err - malfunction
End - end of life of the sensor
Peak value button
After pressing the button the display shows the highest CO level detected since the detector memory reset
Mounting On a wall (accessories included) or as a standalone device
Test/Reset button
Warranty period 10 years
Temperature range           0°C…+40°C (operation),
-10°C…+60°C (storage/transport)
Dimensions 118 x 70 x 40 mm
Weight (with batteries) 0.12 kg