Carbon Monoxide Detector KIDDE 7DCO (LCD display)

Code: G9587
This product is no longer available
Estore: Library:



Carbon Monoxide Detector KIDDE 7DCO (LCD display)
The Kidde 7DCO carbon monoxide detector is used for continuous monitoring of premises exposed to the danger of this poisonous gas. The device has been equipped with a new generation electrochemical CO sensor with a 10-year lifespan, by ca. 43% longer than in the case of the series 5 of Kidde and other detectors available in the market. The device has LCD display showing the level of carbon monoxide in the range of 0 to 999 PPM. The CO concentration is measured every second. The sensor is equipped with optical (red LED) and acoustic signaling (85 dB pulsating alarm sound) which automatically starts when a threat is detected. TEST / RESET button on the front panel is used for verifying all functions of the detector and stopping alarms. By pressing another button the user can read the peak (maximum) value of CO concentration stored in the memory of the detector.
Self-diagnostic circuitry of the detector constantly monitors the condition of the sensor, battery and internal circuits - the device informs the user about problems by warning sounds and relevant pieces of information. Thanks to the fact that the unit is battery-powered, it is independent from the AC power network and can be installed in any suitable place. Additionally, a special shockproof construction allows for applications in trailers, campers or on boats. The device is wall-mountable or can be placed on a flat surface. After 10-year protection period the unit will inform users about the necessity of replacing it with a new one.
  • One of the world's most precise electrochemical CO sensors,
  • Ca. 43% longer lifespan compared to most CO detectors available in the market,
  • Suitable for applications in trailers, campers or on boats,
  • Loud alarm sound,
  • LCD display,
  • Test / Reset button to control the device,
  • Battery-operated device - independence from AC power network,
  • Low battery, error and end of product life alarms,
  • Wall mountable (can also be placed on a flat surface),
  • Ergonomic and tough casing,
  • Very low cost of operation,
  • BSI certificate confirming compliance with EN50291-1:2010,
  • BSI certificate confirming compliance with EN50291-2:2010,
  • Easy to mount and operate,
  • 10-year warranty.
CO alarm threshold levels and alarm activation times are compliant with EN 50291-1:2010:
  • 30 PPM - no alarm before 120 minutes
  • 50 PPM - alarm between 60-90 minutes
  • 100 PPM - alarm between 10-40 minutes
  • 300 PPM - alarm within 3 minutes
The detector has the certificate of compliance with EN 50291-1: 2010 for home CO detectors and with EN 50291-2: 2010 for applications in trailers, campers or on boats. The compliance has been confirmed by an independent research unit - British Standard Institute (BSI).
Code G9587
Category Carbon monoxide detector
Autonomous operation
Sensor type
Optical indication
Red LED, indication of the detected concentration on the LCD
Sound alarm 85 dB
Environment humidity range up to 90% RH (no condensation)
Power 3x AA 1.5 VDC alkaline battery (included)
Low battery warning
Lo info on the LCD, short sounds, flashing red LED
Malfunction indication
Err info on the LCD, short sounds, flashing red LED or continuous alarm with "dead" LCD
End of life indication End info on the LCD, two short sounds and two flashes of red LED during 30 seconds
LCD indications
Real-time CO concentration measurements within 0 - 999 PPM range
Lo - low battery
Err - malfunction
End - end of life of the sensor
Peak value button
After pressing the button the display shows the highest CO level detected since the detector memory reset
Mounting On a wall (accessories included) or as a standalone device
Test/Reset button
Warranty period 10 years
Temperature range           0°C…+40°C (operation),
-10°C…+60°C (storage/transport)
Dimensions 118 x 70 x 40 mm
Weight (with batteries) 0.16 kg