Cat 5e UTP Cable: DRAKA [305m]

Code: E1508_305
This product is no longer available
Estore: Library:

Support

Details

View of the box with the cable inside (on a spool)

The cable is sold in the quantities:
100m E1508_100,
305m E1508_305,
500m E1508_500,
and required number of meters: E1508_1.
Close-up

UC300 26 Li-2YY 4x2x0.48L (AWG 26) 100W- SO/IEC 11801 CAT-5e UTP
Application according to standards: IEEE 802.3: 10Base-T; 100Base-T; 1000Base-T; IEEE 802.5 16 MB; ISDN; FDDI; ATM fire proof up to IEC 60332-1.
Structure: Insulated copper wires diam. 0.48mm (AWG26); wire insulation: polyethylene, diam. 0.9mm; external insulation: PVC sheath.
Mechanical characteristics: Minimum bending radius: 40 mm; temperature range (after installation): -20 to + 60 deg(C), (when installing): 0 to + 50 deg(C).
Electrical characteristics (20 deg C): Resistance of each wire: <260 ohm/km; wire resistance unbalance of each pair: <3%; insulation resistance of each wire (500 V): > 2000 Mohm/km.
Efficient capacitance of each pair (nominal value at 800 Hz): 48 nF/km; wave impedance (1-100 MHz): 100 +/-15 [ohm]; wave reduction factor: 67%.
Transmission characteristics
f. MHz

Wave
suppression
dB/10m
nominal

NEXT
dB
min nom

PS- NEXT
dB
min nom

ELFEXT
dB/10m
min. nom.

PS-ELFEXT
dB/10m
min. nom.

Attenuation
dB

1 0.3 65 71 62 68 64 68 61 65 20
4 0.6 56 62 53 59 52 56 49 53 23
10 0.9 50 56 47 53 44 48 41 45 25
16 1.1 47 53 44 50 40 44 37 41 25
20 1.3 46 51 43 48 38 42 35 39 25
31.2 1.6 43 49 40 46 34 38 31 35 24
62.5 2.4 38 44 35 41 28 32 25 29 22
100 3.0 35 41 32 38 24 28 21 25 20
125 3.3   40   37   26   23 19
155.5 3.6   38   35   24   21  
175 3.9   37   34   23   20  
200 4.1   36   33   22   19  
250 4.4   35   32   20   17  
300 4.8   34   31   16   13  
Application
Category 5e twisted pair cable for data transmission.

The cable is sold in the box (see above) that enables the installer to get it out easily.
Category 5 transmission cable - what it is, how to define its parameters and how to use it in practice.
Price for 305m