How to attach RJ-45 connector to cat 5 UTP cable? Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.
€144.42
Price | Disc. | Quantity | Validity |
---|---|---|---|
€144.42 | 0 % | from 1 piece |
Available
NETSET BOX UTPw 5e E1410 is a top quality outdoor UTP cable (twisted-pair cable) designed for use in computer networks.
Main features:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee;
- preliminary quality control of materials and thorough tests of the final product;
- meter markers;
- solid wires of 0.5 mm diameter (24 AWG);
- wire insulation made of homogeneous, colored PE; outer diameter: 1.01 mm;
- insulated wires twisted in pairs of 2.02 mm diameter;
- pairs twisted together, in gel;
- sheath made of black PE, outer diameter of 6.0 mm.
• Can be installed in damp conditions
• Pairs twisted together in gel
• Jacket made of black PE (polyethylene)
• 305 meters, packed in pull box
• 15-year warranty
• Pairs twisted together in gel
• Jacket made of black PE (polyethylene)
• 305 meters, packed in pull box
• 15-year warranty
Details
NETSET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
The gel-filled NETSET BOX UTPw 5e E1410_305 is a top quality twisted-pair cable designed for professional data transmission systems in environments with increased humidity. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The center of the cable is filled with gel to prevent longitudinal water penetration in the cable. The cable put into ducts or trays can be used in installations buried in the ground.
The latest high-performance IP CCTV cameras require appropriate quality of transmission medium. High resolutions of the cameras are connected with high bandwidth requirements (especially in the case of megapixel devices). A very important feature of a UTP cable becomes the crosstalk between pairs.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
The outer diameter of the gel-filled NETSET UTP5e cable has been reduced to 6.0 mm, which considerably facilitates laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.
Distinguishing features of NETSET BOX UTPw Cat 5e:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- parameters far exceeding the requirements for Category 5e twisted pair cables,
- preliminary quality control of materials and thorough tests of the final product,
- meter markers - length error less than 0.5%,
- 305 meters, packed in pull box
- solid wires of 0.50 mm diameter (24 AWG),
- wire insulation made of homogeneous, colored PE; outer diameter: 1.01 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- insulated wires twisted in pairs of 2.02 mm diameter,
- pairs twisted together, in gel,
- sheath made of black PE, outer diameter of 6.0 mm.
NETSET BOX UTPw 5e E1410_305 Ethernet cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition: 2002, ISO/IEC 11801 standards.
NETSET cables come with a 15-year warranty.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
NETSET BOX UTPw 5e E1410_305 cable can be used in a wide temperature range: -40oC...+50oC, and installed between -30oC and +50 oC.
NETSET BOX UTPw CAT 5e cable has been tested by
Central Chamber for Telecommunications Testing of
National Institute of Telecommunications in Warsaw, Poland
- Pair resistance testing.
Pair | Wire | Wire resistance [Ω/km] | Resistance asymmetry [%] | |
UTPw 5e gel-filled | 1 | a | 87.320 | 0.22 |
b | 87.36 | |||
2 | a | 84.663 | 0.20 | |
b | 84.831 | |||
3 | a | 85.082 | 0.21 | |
b | 84.903 | |||
4 | a | 86.035 | 0.18 | |
b | 86.192 | |||
Required | - | - | ≤150 | ≤3.0 |
- Capacitance testing.
Pair | Effective capacitance [nF/km] | Capacitance asymmetry [pF/km] | |
UTPw 5e gel-filled | 1 | 51.74 | 208 |
2 | 49.21 | 116 | |
3 | 49.79 | 7 | |
4 | 50.85 | 13 | |
Required | - | ≤55 | ≤1600 |
- Insulation testing.
Pair | Wire | Insulation resistance [MΩ/km] | |
UTPw 5e gel-filled | 1 | a | 4.5 · 105 |
b | 4.8 · 105 | ||
2 | a | 6.6 · 105 | |
b | 4.6 · 105 | ||
3 | a | 4.9 · 105 | |
b | 5.8 · 105 | ||
4 | a | 4.5 · 105 | |
b | 7.0 · 104 | ||
Required | - | - | ≥150 |
- Tests of electric strength of insulation.
Test method | Test voltage [VAC] | |
Applied (passed) | Required | |
Voltage applied between connected in parallel all a wires and all b wires | 1000 | 1000 |
- End-to-end attenuation testing.
Pair | Effective attenuation [dB] | |
UTPw 5e gel-filled | 1 | 21.2 |
2 | 20.8 | |
3 | 20.5 | |
4 | 21.2 | |
Required | - | ≤24.9 |
- Near End Cross Talk (NEXT) testing.
Pair to pair | NEXT [dB] | |
UTPw 5e gel-filled | 1-2 | 47.3 |
1-3 | 52.6 | |
1-4 | 55.4 | |
2-3 | 54.8 | |
2-4 | 55.5 | |
3-4 | 60.2 | |
Required | - | ≥34.0 |
- Return loss testing.
Pair | Return loss [dB] | |
UTPw 5e gel-filled | 1 | 20.7 |
2 | 21.8 | |
3 | 22.4 | |
4 | 21.5 | |
Required | - | ≥19.4 |
- Total Near End Cross Talk (PS-NEXT) testing.
Pair | PS-NEXT [dB] | |
UTPw 5e gel-filled | 1 | 45.69 |
2 | 46.07 | |
3 | 50.11 | |
4 | 51.77 | |
Required | - | ≥31.0 |
The parameters show that NETSET BOX UTPw 5e fulfills all requirements for Category 5e cables, with a large safety margin.
Price for 305m (1000 feet) in unreel box
Specifications
Name | NETSET U/UTP cat. 5e outdoor, gel-filled | ||
Product type | twisted-pair cable | ||
Manufacturer | DIPOL | ||
Brand | NETSET | ||
Cable type | U/UTP | ||
Applications | Outdoor | ||
Category | 5e | ||
Cable length | m | 305 | |
CPR class | FCA | ||
Physical properties | |||
Conductor | Material | Cooper | |
Diameter | mm | +/-0.5 | |
Conductor insulation | Material | HDPE (polyethylene) | |
Diameter | mm | 0,96 | |
Twisted pairs | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
sheath | Material | LDPE | |
Diameter | mm | 5,5 | |
thickness | mm | 0,55 | |
Color | RAL9005 (black) | ||
Gel filled | Yes | ||
Carrier cable | No | ||
Rip-cord | Yes | ||
Spline | No | ||
Length marker print error | % | <0.5 | |
Electrical parameters | |||
Impedance | Ohm | 100 | |
Nominal Velocity of Propagation NVP | % | 67 | |
Delay skew | ns/100 m | <45 | |
DC resistance | Ohm/100 m | 9,5 | |
Resistance asymmetry | % | <5 | |
Return Loss | 1 MHz | ≥dB | 19 |
4 MHz | ≥dB | 19 | |
8 MHz | ≥dB | 19 | |
10 MHz | ≥dB | 19 | |
16 MHz | ≥dB | 19 | |
20 MHz | ≥dB | 19 | |
25 MHz | ≥dB | 18 | |
31.25 MHz | ≥dB | 17,1 | |
62.5 MHz | ≥dB | 14,1 | |
100 MHz | ≥dB | 12 | |
Loss | 1 MHz | ≤dB | 3 |
4 MHz | ≤dB | 3,9 | |
8 MHz | ≤dB | 5,5 | |
10 MHz | ≤dB | 6,2 | |
16 MHz | ≤dB | 7,9 | |
20 MHz | ≤dB | 8,9 | |
25 MHz | ≤dB | 10 | |
31.25 MHz | ≤dB | 11,2 | |
62.5 MHz | ≤dB | 16,2 | |
100 MHz | ≤dB | 21 | |
NEXT (near-end crosstalk) | 1 MHz | ≤dB | 60 |
4 MHz | ≤dB | 54,8 | |
8 MHz | ≤dB | 50 | |
10 MHz | ≤dB | 48,5 | |
16 MHz | ≤dB | 45,2 | |
20 MHz | ≤dB | 43,7 | |
25 MHz | ≤dB | 42,1 | |
31.25 MHz | ≤dB | 40,5 | |
62.5 MHz | ≤dB | 35,7 | |
100 MHz | ≤dB | 32,3 | |
PSNEXT (power sum near-end crosstalk) | 1 MHz | ≥dB | 57 |
4 MHz | ≥dB | 51,8 | |
8 MHz | ≥dB | 47 | |
10 MHz | ≥dB | 45,5 | |
16 MHz | ≥dB | 42,2 | |
20 MHz | ≥dB | 40,7 | |
25 MHz | ≥dB | 39,1 | |
31.25 MHz | ≥dB | 37,5 | |
62.5 MHz | ≥dB | 32,7 | |
100 MHz | ≥dB | 29,3 | |
ELFEXT | 1 MHz | ≥dB | 58,6 |
4 MHz | ≥dB | 46,6 | |
8 MHz | ≥dB | 40,6 | |
10 MHz | ≥dB | 38,6 | |
16 MHz | ≥dB | 34,5 | |
20 MHz | ≥dB | 32,6 | |
25 MHz | ≥dB | 30,7 | |
31.25 MHz | ≥dB | 28,7 | |
62.5 MHz | ≥dB | 22,7 | |
100 MHz | ≥dB | 18,6 | |
PSELFEXT (power sum far-end crosstalk) | 1 MHz | ≥dB | 55,6 |
4 MHz | ≥dB | 43,6 | |
8 MHz | ≥dB | 37,5 | |
10 MHz | ≥dB | 35,6 | |
16 MHz | ≥dB | 31,5 | |
20 MHz | ≥dB | 29,6 | |
25 MHz | ≥dB | 27,7 | |
31.25 MHz | ≥dB | 25,7 | |
62.5 MHz | ≥dB | 19,7 | |
100 MHz | ≥dB | 15,6 | |
Mechanical properties | |||
Operating temperature | °C | -20...+70 | |
Installation temperature | °C | -30...+50 | |
Minimum bending radius for indoor installation | Diameter | >8 |