How to attach RJ-45 connector to cat 5 UTP cable? Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.
€121.54
Price | Disc. | Quantity | Validity |
---|---|---|---|
€121.54 | 0 % | from 1 piece |
Available
NETSET BOX UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.
• Hose for outdoor use, without gel
• PE coating resistant to UV radiation
• Quality confirmed by tests at the Central Research Laboratory of the Communications Institute in Warsaw
• 305 m self-expanding carton
• 15 year warranty
• PE coating resistant to UV radiation
• Quality confirmed by tests at the Central Research Laboratory of the Communications Institute in Warsaw
• 305 m self-expanding carton
• 15 year warranty
Details
NETSET brand cables are compliant with the directive CPR and comply with the European standard EN 50575, which specifies fire performance requirements, test methods and evaluation of cables as building materials.
The NETSET BOX U/UTP PE category 5e E1412 twisted pair cable is the highest quality twisted pair cable designed for professional installations in outdoor conditions. The outer sheath is made of polyethylene (PE) resistant to UV radiation and humidity. The cable is used for making outdoor installations, run in the ground, in cable ducts. In conditions of significantly increased humidity, twisted pair E1410 should be used with a centre additionally filled with gel.
The new generation of IP cameras introduced in recent years has increased the requirements for the transmission medium, i.e. Category 5e UTP cable. The production of high-resolution cameras has significantly increased the demand for bandwidth, multiplying the amount of transmitted data. For this reason, twisted-pair crosstalk parameters become such an important criterion for twisted-pair cable selection.
In response to market demand, DIPOL has introduced a family of twisted-pair cables with the highest parameters under the common name NETSET.
In response to market demand, DIPOL has introduced a family of twisted-pair cables with the highest parameters under the common name NETSET.
The NETSET U/UTP 5e twisted pair cable has an outer diameter reduced to 6.0 mm, which greatly facilitates the laying of the twisted pair in trays and pipes. A special conductor insulation material has been selected to facilitate the application of RJ-45 connectors.
Distinguishing features of NETSET UTP PE 5e cable:
- highest quality materials, perfect workmanship confirmed by a 15 year warranty
- parameters significantly exceeding the requirements of category 5+ confirmed by tests at the Central Research Laboratory of the Institute of Communications in Warsaw
- pre-production quality control of raw materials and post-production quality control of the finished product
- metre marker
- 305m self-coiling carton
- single stranded copper conductors with a diameter of Ø 0.50 mm (24 according to AWG)
- conductor insulation made of PE uniform insulating polyethylene, coloured in mass, conductor diameter: Ø 1,01 mm, conductor insulation colours: white/green/green, white/orange/orange, white/brown/brown, white/blue/blue
- insulated conductors twisted in pairs, pair diameter Ø 2,02 mm
- cable sheath made of polyethylene PE in black, outer diameter Ø 6,0 mm,
- imprinting error max. 0.5%
NETSET UTP PE 5e E1412_305 cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition: 2002, ISO/IEC 11801 standards.
NETSET cables come with a 15-year warranty.
The manufacturer guarantees the stability of the parameters for a period of 15 years. The condition for maintaining the guarantee is to observe the principles of packaging, storage and transport described in the PN-70 E-79100 standard and the principles of operation described in the PN-EN 50174-1 standard.
NETSET UTP PE 5e E1412_305 cable can be used in a wide temperature range: -20o...+50oC, and installed between -30o...+50 oC.
NETSET BOX UTP CAT 5e cable has been tested by
Central Chamber for Telecommunications Testing of
National Institute of Telecommunications in Warsaw, Poland
and got
CERTIFICATE OF THE INSTITUTE
The results of NETSET BOX UTP CAT 5e tests performed by
National Institute of Telecommunications in Warsaw
- Pair resistance testing.
Pair | Wire | Wire resistance [Ω/km] | Resistance asymmetry [%] | |
UTP cat. 5e PE | 1 | a | 87.320 | 0.22 |
b | 87.136 | |||
2 | a | 84.663 | 0.20 | |
b | 84.831 | |||
3 | a | 85.082 | 0.21 | |
b | 84.903 | |||
4 | a | 86.035 | 0.18 | |
b | 86.192 | |||
Required | - | - | ≤150 | ≤3.0 |
- Checking effective capacity and capacity asymmetry .
Pair | Effective capacitance [nF/km] | Capacitance asymmetry [pF/km] | |
UTP cat. 5e PE | 1 | 51.74 | 208 |
2 | 49.21 | 116 | |
3 | 49.79 | 7 | |
4 | 50.85 | 13 | |
Required | - | ≤55 | ≤1600 |
- Insulation testing.
Pair | Wire | Insulation resistance [MΩ/km] | |
UTP kat. 5e PE | 1 | a | 4.5 · 105 |
b | 4.8 · 105 | ||
2 | a | 6.6 · 105 | |
b | 4.6 · 105 | ||
3 | a | 4.9 · 105 | |
b | 5.8 · 105 | ||
4 | a | 4.5 · 105 | |
b | 7.0 · 104 | ||
Required | - | - | ≥150 |
- Tests of electric strength of insulation.
Test method | Test voltage [VAC] | |
Applied (passed) | Required | |
Voltage applied between connected in parallel all a wires and all b wires | 1000 | 1000 |
- End-to-end attenuation testing.
Pair | Effective attenuation [dB] | |
UTP cat. 5e PE | 1 | 21.2 |
2 | 20.8 | |
3 | 20.5 | |
4 | 21.2 | |
Required | - | ≤24.9 |
- Near End Cross Talk (NEXT) testing.
Pair to pair | NEXT [dB] | |
UTP cat. 5e PE | 1-2 | 47.3 |
1-3 | 52.6 | |
1-4 | 55.4 | |
2-3 | 54.8 | |
2-4 | 55.5 | |
3-4 | 60.2 | |
Required | - | ≥34.0 |
- Return loss testing.
Pair | Return loss [dB] | |
UTP cat. 5e PE | 1 | 20.7 |
2 | 21.8 | |
3 | 22.4 | |
4 | 21.5 | |
Required | - | ≥19.4 |
- Total Near End Cross Talk (PS-NEXT) testing.
Pair | PS-NEXT [dB] | |
UTP cat. 5e PE | 1 | 45.69 |
2 | 46.07 | |
3 | 50.11 | |
4 | 51.77 | |
Required | - | ≥31.0 |
The parameters show that NETSET BOX UTP PE 5e fulfills all requirements for Category 5e cables, with a large safety margin.
Price for 305 m (1000 feet) in unreel box
Specifications
Name | NETSET U/UTP Cat. 5e outdoor | ||
Product type | twisted-pair cable | ||
Manufacturer | Dipol | ||
Brand | NETSET | ||
Cable type | U/UTP | ||
Applications | Outdoor | ||
Category | 5e | ||
Cable length | m | 305 | |
CPR class | FCA | ||
Physical properties | |||
Conductor | Material | Cooper | |
Conductor | Diameter | mm | 0.5 |
Conductor insulation | Material | HDPE (polyethylene) | |
Conductor insulation | Diameter | mm | 0.87 |
Twisted pairs | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
sheath | Material | LDPE | |
sheath | Diameter | mm | 5.2 |
thickness | mm | 0.55 | |
Color | RAL9005 (black) | ||
Gel filled | No | ||
Carrier cable | No | ||
Rip-cord | Yes | ||
Spline | No | ||
Length marker print error | % | <0.5 | |
Electrical parameters | |||
Impedance | Ohm | 100 | |
Nominal Velocity of Propagation NVP | % | 67 | |
Delay skew | ns/100 m | <45 | |
DC resistance | Ohm/100 m | 9.5 | |
Resistance asymmetry | % | <5 | |
Return Loss | 1 MHz | ≥dB | 20 |
Return Loss | 4 MHz | ≥dB | 23 |
8 MHz | ≥dB | 24.5 | |
10 MHz | ≥dB | 25 | |
16 MHz | ≥dB | 25 | |
20 MHz | ≥dB | 25 | |
25 MHz | ≥dB | 24.3 | |
31.25 MHz | ≥dB | 23.6 | |
62.5 MHz | ≥dB | 21.5 | |
100 MHz | ≥dB | 20.1 | |
Loss | 1 MHz | ≤dB | 2 |
Loss | 4 MHz | ≤dB | 4.1 |
8 MHz | ≤dB | 5.8 | |
10 MHz | ≤dB | 6.5 | |
16 MHz | ≤dB | 8.2 | |
20 MHz | ≤dB | 9.3 | |
25 MHz | ≤dB | 10.4 | |
31.25 MHz | ≤dB | 11.7 | |
62.5 MHz | ≤dB | 17 | |
100 MHz | ≤dB | 22 | |
NEXT (near-end crosstalk) | 1 MHz | ≤dB | 65.3 |
NEXT (near-end crosstalk) | 4 MHz | ≤dB | 56.3 |
8 MHz | ≤dB | 51.8 | |
10 MHz | ≤dB | 50.3 | |
16 MHz | ≤dB | 47.2 | |
20 MHz | ≤dB | 45.8 | |
25 MHz | ≤dB | 44.3 | |
31.25 MHz | ≤dB | 42.9 | |
62.5 MHz | ≤dB | 38.4 | |
100 MHz | ≤dB | 35.3 | |
PSNEXT (power sum near-end crosstalk) | 1 MHz | ≥dB | 62.3 |
PSNEXT (power sum near-end crosstalk) | 4 MHz | ≥dB | 53.3 |
8 MHz | ≥dB | 48.8 | |
10 MHz | ≥dB | 47.3 | |
16 MHz | ≥dB | 44.4 | |
20 MHz | ≥dB | 42.8 | |
25 MHz | ≥dB | 41.3 | |
31.25 MHz | ≥dB | 39.9 | |
62.5 MHz | ≥dB | 35.4 | |
100 MHz | ≥dB | 32.3 | |
ELFEXT | 1 MHz | ≥dB | 63.8 |
ELFEXT | 4 MHz | ≥dB | 51.8 |
8 MHz | ≥dB | 45.7 | |
10 MHz | ≥dB | 43.8 | |
16 MHz | ≥dB | 39.7 | |
20 MHz | ≥dB | 37.8 | |
25 MHz | ≥dB | 35.8 | |
31.25 MHz | ≥dB | 33.9 | |
62.5 MHz | ≥dB | 27.9 | |
100 MHz | ≥dB | 23.8 | |
PSELFEXT (power sum far-end crosstalk) | 1 MHz | ≥dB | 60.8 |
PSELFEXT (power sum far-end crosstalk) | 4 MHz | ≥dB | 48.8 |
8 MHz | ≥dB | 42.7 | |
10 MHz | ≥dB | 40.8 | |
16 MHz | ≥dB | 36.7 | |
20 MHz | ≥dB | 34.8 | |
25 MHz | ≥dB | 32.8 | |
31.25 MHz | ≥dB | 30.9 | |
62.5 MHz | ≥dB | 24.9 | |
100 MHz | ≥dB | 20.8 | |
Mechanical properties | |||
Operating temperature | °C | -20...+70 | |
Installation temperature | °C | -30...+50 | |
Minimum bending radius for indoor installation | Diameter | >8 |