How to attach RJ-45 connector to cat 5 UTP cable? Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.
€127.34
Price | Disc. | Quantity | Validity |
---|---|---|---|
€127.34 | 0 % | from 1 piece |
Available
NETSET BOX UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.
Details
NETSET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
NETSET UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.
The latest high-performance IP CCTV cameras require appropriate quality of transmission medium. High resolutions of the cameras are connected with high bandwidth requirements (especially in the case of megapixel devices). A very important feature of a UTP cable becomes the crosstalk between pairs.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
Due to market demand DIPOL has introduced a new family of high-quality twisted-pair cables named NETSET.
The outer diameter of the NETSET UTP PE 5e cable has been reduced to 6.0 mm, which considerably facilitates laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.
Distinguishing features of NETSET UTP PE 5e cable:
- highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
- parameters far exceeding the requirements for Category 5+ twisted pair cables, confirmed by the tests performed in Central Testing Laboratory of the National Institute of Telecommunications in Warsaw, Poland,
- preliminary quality control of materials and thorough tests of the final product,
- meter markers - length error less than 0.5%,
- solid wires of 0.50 mm diameter (24 AWG),
- wire insulation made of homogeneous, colored PE; outer diameter: 1.01 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
- insulated wires twisted in pairs of 2.02 mm diameter,
- pairs twisted together,
- sheath made of black PE, outer diameter of 6.0 mm.
NETSET UTP PE 5e E1412_305 cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition: 2002, ISO/IEC 11801 standards.
NETSET cables come with a 15-year warranty.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions (see the "Specifications" below).
NETSET UTP PE 5e E1412_305 cable can be used in a wide temperature range: -20o...+50oC, and installed between -30o...+50 oC.
NETSET BOX UTP CAT 5e cable has been tested by
Central Chamber for Telecommunications Testing of
National Institute of Telecommunications in Warsaw, Poland
and got
CERTIFICATE OF THE INSTITUTE
The results of the measurements of the NETSET BOX UTP PE 5e cable conducted by the
National Institute of Telecommunications in Warsaw, Poland
The results of NETSET BOX UTP CAT 5e tests performed by
National Institute of Telecommunications in Warsaw
- Pair resistance testing.
Pair | Wire | Wire resistance [Ω/km] | Resistance asymmetry [%] | |
UTP cat. 5e PE | 1 | a | 87.320 | 0.22 |
b | 87.136 | |||
2 | a | 84.663 | 0.20 | |
b | 84.831 | |||
3 | a | 85.082 | 0.21 | |
b | 84.903 | |||
4 | a | 86.035 | 0.18 | |
b | 86.192 | |||
Required | - | - | ≤150 | ≤3.0 |
- Capacitance testing.
Pair | Effective capacitance [nF/km] | Capacitance asymmetry [pF/km] | |
UTP cat. 5e PE | 1 | 51.74 | 208 |
2 | 49.21 | 116 | |
3 | 49.79 | 7 | |
4 | 50.85 | 13 | |
Required | - | ≤55 | ≤1600 |
- Insulation testing.
Pair | Wire | Insulation resistance [MΩ/km] | |
UTP kat. 5e PE | 1 | a | 4.5 · 105 |
b | 4.8 · 105 | ||
2 | a | 6.6 · 105 | |
b | 4.6 · 105 | ||
3 | a | 4.9 · 105 | |
b | 5.8 · 105 | ||
4 | a | 4.5 · 105 | |
b | 7.0 · 104 | ||
Required | - | - | ≥150 |
- Tests of electric strength of insulation.
Test method | Test voltage [VAC] | |
Applied (passed) | Required | |
Voltage applied between connected in parallel all a wires and all b wires | 1000 | 1000 |
- End-to-end attenuation testing.
Pair | Effective attenuation [dB] | |
UTP cat. 5e PE | 1 | 21.2 |
2 | 20.8 | |
3 | 20.5 | |
4 | 21.2 | |
Required | - | ≤24.9 |
- Near End Cross Talk (NEXT) testing.
Pair to pair | NEXT [dB] | |
UTP cat. 5e PE | 1-2 | 47.3 |
1-3 | 52.6 | |
1-4 | 55.4 | |
2-3 | 54.8 | |
2-4 | 55.5 | |
3-4 | 60.2 | |
Required | - | ≥34.0 |
- Return loss testing.
Pair | Return loss [dB] | |
UTP cat. 5e PE | 1 | 20.7 |
2 | 21.8 | |
3 | 22.4 | |
4 | 21.5 | |
Required | - | ≥19.4 |
- Total Near End Cross Talk (PS-NEXT) testing.
Pair | PS-NEXT [dB] | |
UTP cat. 5e PE | 1 | 45.69 |
2 | 46.07 | |
3 | 50.11 | |
4 | 51.77 | |
Required | - | ≥31.0 |
The parameters show that NETSET BOX UTP PE 5e fulfills all requirements for Category 5e cables, with a large safety margin.
Price for 305m (1000 feet) in unreel box
Specifications
Name | NETSET U/UTP Cat. 5e outdoor | ||
Product type | twisted-pair cable | ||
Manufacturer | Dipol | ||
Brand | NETSET | ||
Cable type | U/UTP | ||
Applications | Outdoor | ||
Category | 5e | ||
Cable length | m | 305 | |
CPR class | FCA | ||
Physical properties | |||
Conductor | Material | Cooper | |
Diameter | mm | 0.5 | |
Conductor insulation | Material | HDPE (polyethylene) | |
Diameter | mm | 0.87 | |
Twisted pairs | colors | white-brown/brown, white-blue/blue, white-orange/orange, white-green/green | |
sheath | Material | LDPE | |
Diameter | mm | 5.2 | |
thickness | mm | 0.55 | |
Color | RAL9005 (black) | ||
Gel filled | No | ||
Carrier cable | No | ||
Rip-cord | Yes | ||
Spline | No | ||
Length marker print error | % | <0.5 | |
Electrical parameters | |||
Impedance | Ohm | 100 | |
Nominal Velocity of Propagation NVP | % | 67 | |
Delay skew | ns/100 m | <45 | |
DC resistance | Ohm/100 m | 9.5 | |
Resistance asymmetry | % | <5 | |
Return Loss | 1 MHz | ≥dB | 20 |
4 MHz | ≥dB | 23 | |
8 MHz | ≥dB | 24.5 | |
10 MHz | ≥dB | 25 | |
16 MHz | ≥dB | 25 | |
20 MHz | ≥dB | 25 | |
25 MHz | ≥dB | 24.3 | |
31.25 MHz | ≥dB | 23.6 | |
62.5 MHz | ≥dB | 21.5 | |
100 MHz | ≥dB | 20.1 | |
Loss | 1 MHz | ≤dB | 2 |
4 MHz | ≤dB | 4.1 | |
8 MHz | ≤dB | 5.8 | |
10 MHz | ≤dB | 6.5 | |
16 MHz | ≤dB | 8.2 | |
20 MHz | ≤dB | 9.3 | |
25 MHz | ≤dB | 10.4 | |
31.25 MHz | ≤dB | 11.7 | |
62.5 MHz | ≤dB | 17 | |
100 MHz | ≤dB | 22 | |
NEXT (near-end crosstalk) | 1 MHz | ≤dB | 65.3 |
4 MHz | ≤dB | 56.3 | |
8 MHz | ≤dB | 51.8 | |
10 MHz | ≤dB | 50.3 | |
16 MHz | ≤dB | 47.2 | |
20 MHz | ≤dB | 45.8 | |
25 MHz | ≤dB | 44.3 | |
31.25 MHz | ≤dB | 42.9 | |
62.5 MHz | ≤dB | 38.4 | |
100 MHz | ≤dB | 35.3 | |
PSNEXT (power sum near-end crosstalk) | 1 MHz | ≥dB | 62.3 |
4 MHz | ≥dB | 53.3 | |
8 MHz | ≥dB | 48.8 | |
10 MHz | ≥dB | 47.3 | |
16 MHz | ≥dB | 44.4 | |
20 MHz | ≥dB | 42.8 | |
25 MHz | ≥dB | 41.3 | |
31.25 MHz | ≥dB | 39.9 | |
62.5 MHz | ≥dB | 35.4 | |
100 MHz | ≥dB | 32.3 | |
ELFEXT | 1 MHz | ≥dB | 63.8 |
4 MHz | ≥dB | 51.8 | |
8 MHz | ≥dB | 45.7 | |
10 MHz | ≥dB | 43.8 | |
16 MHz | ≥dB | 39.7 | |
20 MHz | ≥dB | 37.8 | |
25 MHz | ≥dB | 35.8 | |
31.25 MHz | ≥dB | 33.9 | |
62.5 MHz | ≥dB | 27.9 | |
100 MHz | ≥dB | 23.8 | |
PSELFEXT (power sum far-end crosstalk) | 1 MHz | ≥dB | 60.8 |
4 MHz | ≥dB | 48.8 | |
8 MHz | ≥dB | 42.7 | |
10 MHz | ≥dB | 40.8 | |
16 MHz | ≥dB | 36.7 | |
20 MHz | ≥dB | 34.8 | |
25 MHz | ≥dB | 32.8 | |
31.25 MHz | ≥dB | 30.9 | |
62.5 MHz | ≥dB | 24.9 | |
100 MHz | ≥dB | 20.8 | |
Mechanical properties | |||
Operating temperature | °C | -20...+70 | |
Installation temperature | °C | -30...+50 | |
Minimum bending radius for indoor installation | Diameter | >8 |