This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Cat. 5e UTP Cable: NETSET U/UTP PE (outdoor) [1 m]

  2. CCTV
  3. Cables
  4. Twisted pair
Code: E1412_1
€0.56
Price Disc. Quantity Validity
€0.56 0 % from 1 piece
Available
NETSET U/UTP Category 5e twisted pair cable is the highest quality twisted pair designed for professional outdoor installations.
• Cable type: U/UTP
• Category 5e
• Application: outdoor
• PE sheath
• Core diameter 0.5 mm (24 AWG)
• Cable sold by the metre
Estore: Library: , , , , , , , , .

Warranty

15-year warranty.

Support

Any questions or comments?

  • Write to us!

Details

Note: The maximum length of the ordered section is 300 m.
NETSET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
NETSET UTP PE 5e E1412 is a top quality twisted-pair cable designed for professional data transmission systems installed outdoors. Its polyethylene (PE) sheath is resistant to UV radiation (sunlight) and moisture. The cable put into ducts or trays can be used in installations buried in the ground. However, in the case of cabling operating in environments with increased humidity, the better choice is the gel-filled cable - NETSET UTPw 5e E1410.
The introduction of a new generation of IP cameras in recent years has increased the requirements for the transmission medium UTP category 5e. The production of high-resolution cameras has significantly increased the demand for bandwidth, multiplying the amount of transmitted data. For this reason, twisted-pair crosstalk parameters become such an important criterion for twisted-pair cable selection.
In response to market demand, DIPOL has introduced a family of twisted-pair cables with the highest parameters under the common name NETSET.
The outer diameter of the NETSET UTP PE 5e cable has been reduced to 6.0 mm, which considerably facilitates laying of the cable in ducts and pipes. The insulation of the wires has been made of special PE, to make it easier to crimp RJ-45 connectors onto the cable.
Distinguishing features of NETSET UTP PE 5e cable:
  • highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee
  • preliminary quality control of materials and thorough tests of the final product
  • meter markers - length error less than 0.5%
  • solid wires of 0.50 mm diameter (24 AWG)
  • wire insulation made of homogeneous, colored PE; outer diameter: 1.01 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue
  • insulated wires twisted in pairs of 2.02 mm diameter
  • pairs twisted together
  • sheath made of black PE, outer diameter of 6.0 mm
NETSET UTP PE 5e E1412 cable is manufactured in compliance with EN 50173, ISO/IEC 61156-5 edition: 2002, ISO/IEC 11801 standards.
NETSET cables come with a 15-year warranty.


The manufacturer guarantees the stability of the parameters for a period of 15 years. The condition for maintenance of the guarantee is observance of the principles of packaging, storage and transport described in the PN-70 E-79100 standard and the principles of operation described in the PN-EN 50174-1 standard.
NETSET UTP PE 5e E1412 cable can be used in a wide temperature range: -20o...+50oC, and installed between -30o...+50 oC.
The cable is also available in unreel box - E1412_305.
NETSET BOX UTP CAT 5e cable has been tested by
Central Chamber for Telecommunications Testing of
National Institute of Telecommunications in Warsaw, Poland

and got
CERTIFICATE OF THE INSTITUTE

The results of the measurements of the NETSET BOX UTP PE 5e cable conducted by the
National Institute of Telecommunications in Warsaw, Poland
The results of NETSET BOX UTP CAT 5e tests performed by
National Institute of Telecommunications in Warsaw
  • Pair resistance testing.
  Pair Wire Wire resistance [Ω/km] Resistance asymmetry [%]
UTP cat. 5e
PE		 1 a 87.320 0.22
b 87.136
2 a 84.663  0.20
b 84.831
3 a 85.082 0.21
b 84.903
4 a 86.035  0.18
b 86.192
Required - - ≤150  ≤3.0
  • +++ Checking effective capacitance and capacitance asymmetry.
  Pair  Effective capacitance [nF/km] Capacitance asymmetry  [pF/km]
UTP cat. 5e
PE		 1 51.74 208
2 49.21  116
3 49.79 7
4 50.85 13
Required - ≤55 ≤1600
  • Insulation testing.
  Pair Wire Insulation resistance [MΩ/km]
UTP kat. 5e
PE		 1 a 4.5 · 105
b 4.8 · 105
2 a 6.6 · 105
b 4.6 · 105
3 a 4.9 · 105
b 5.8 · 105
4 a 4.5 · 105
b 7.0 · 104
Required - - ≥150
  • Tests of electric strength of insulation.
Test method  Test voltage [VAC]
Applied (passed)
 Required
Voltage applied between connected in parallel all a wires and all b wires 1000 1000
  • End-to-end attenuation testing.
  Pair Effective attenuation [dB]
UTP cat. 5e
PE		 1 21.2
2 20.8
3 20.5
4 21.2
Required - ≤24.9
  • Near End Cross Talk (NEXT) testing.
  Pair to pair
 NEXT [dB]
UTP cat. 5e
PE		 1-2 47.3
1-3 52.6
1-4 55.4
2-3 54.8
2-4 55.5
3-4 60.2
Required - ≥34.0
  • Return loss testing.
  Pair Return loss [dB]

UTP cat. 5e
PE		 1 20.7
2 21.8
3 22.4
4 21.5
Required - ≥19.4
  • Total Near End Cross Talk (PS-NEXT) testing.
  Pair PS-NEXT [dB]
UTP cat. 5e
PE		 1 45.69
2 46.07
3 50.11
4 51.77
Required - ≥31.0
The parameters show that NETSET BOX UTP PE 5e fulfills all requirements for Category 5e cables, with a large safety margin.
Price for 1 m.

Specifications

Name NETSET U/UTP Cat. 5e outdoor
Product type twisted-pair cable
Manufacturer DIPOL
Brand NETSET
Cable type U/UTP
Applications Outdoor
Category 5e
Cable length m Sold per meter
CPR class FCA
Physical properties
Conductor Material Cooper
Conductor Diameter mm 0.5
Conductor insulation Material HDPE (polyethylene)
Conductor insulation Diameter mm 0.87
Twisted pairs colors white-brown/brown, white-blue/blue, white-orange/orange, white-green/green
sheath Material LDPE
sheath Diameter mm 5.2
thickness mm 0.55
Color RAL9005 (black)
Gel filled No
Carrier cable No
Rip-cord Yes
Spline No
Length marker print error % <0.5
Electrical parameters
Impedance Ohm 100
Nominal Velocity of Propagation NVP % 67
Delay skew ns/100 m <45
DC resistance Ohm/100 m 9.5
Resistance asymmetry % <5
Return Loss 1 MHz ≥dB 20
Return Loss 4 MHz ≥dB 23
8 MHz ≥dB 24.5
10 MHz ≥dB 25
16 MHz ≥dB 25
20 MHz ≥dB 25
25 MHz ≥dB 24.3
31.25 MHz ≥dB 23.6
62.5 MHz ≥dB 21.5
100 MHz ≥dB 20.1
Loss 1 MHz ≤dB 2
Loss 4 MHz ≤dB 4.1
8 MHz ≤dB 5.8
10 MHz ≤dB 6.5
16 MHz ≤dB 8.2
20 MHz ≤dB 9.3
25 MHz ≤dB 10.4
31.25 MHz ≤dB 11.7
62.5 MHz ≤dB 17
100 MHz ≤dB 22
NEXT (near-end crosstalk) 1 MHz ≤dB 65.3
NEXT (near-end crosstalk) 4 MHz ≤dB 56.3
8 MHz ≤dB 51.8
10 MHz ≤dB 50.3
16 MHz ≤dB 47.2
20 MHz ≤dB 45.8
25 MHz ≤dB 44.3
31.25 MHz ≤dB 42.9
62.5 MHz ≤dB 38.4
100 MHz ≤dB 35.3
PSNEXT (power sum near-end crosstalk) 1 MHz ≥dB 62.3
PSNEXT (power sum near-end crosstalk) 4 MHz ≥dB 53.3
8 MHz ≥dB 48.8
10 MHz ≥dB 47.3
16 MHz ≥dB 44.4
20 MHz ≥dB 42.8
25 MHz ≥dB 41.3
31.25 MHz ≥dB 39.9
62.5 MHz ≥dB 35.4
100 MHz ≥dB 32.3
ELFEXT 1 MHz ≥dB 63.8
ELFEXT 4 MHz ≥dB 51.8
8 MHz ≥dB 45.7
10 MHz ≥dB 43.8
16 MHz ≥dB 39.7
20 MHz ≥dB 37.8
25 MHz ≥dB 35.8
31.25 MHz ≥dB 33.9
62.5 MHz ≥dB 27.9
100 MHz ≥dB 23.8
PSELFEXT (power sum far-end crosstalk) 1 MHz ≥dB 60.8
PSELFEXT (power sum far-end crosstalk) 4 MHz ≥dB 48.8
8 MHz ≥dB 42.7
10 MHz ≥dB 40.8
16 MHz ≥dB 36.7
20 MHz ≥dB 34.8
25 MHz ≥dB 32.8
31.25 MHz ≥dB 30.9
62.5 MHz ≥dB 24.9
100 MHz ≥dB 20.8
Mechanical properties
Operating temperature °C -20...+70
Installation temperature °C -30...+50
Minimum bending radius for indoor installation Diameter >8

Videos

RJ45 plug on UTP cable - Installing

  • 2010-02-25

How to attach RJ-45 connector to cat 5 UTP cable? Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.