This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

CAT 6 UTP Cable: NETSET BOX U/UTP CAT 6 [305m] (indoor, Dca-s2,d2,a1)

  2. CCTV
  3. Cables
  4. Twisted pair
  • View of the packaging
  • Close-up of the cable
  • The return loss graph of the cable compared with the EN 50173 standard.
  • The NEXT (near end crosstalk) graph of the cable compared with the EN 50173 standard.
  • The PSNEXT (power sum near end crosstalk) graph of the cable compared with the EN 50173 standard.
  • The ELFEXT graph of the cable compared with the EN 50173 standard.
  • The PSELFEXT graph of the cable compared with the EN 50173 standard.
Code: E1614_305
€179.88
Price Disc. Quantity Validity
€179.88 0 % from 1 piece
Available
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.9 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
• highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee
• reaction to fire: Dca-s2,d2,a1+
• parameters far exceeding the requirements for Category 6 twisted pair cables
• preliminary quality control of materials and thorough tests of the final product
• meter markers, deviation less than 0.5%
• solid wires of 0.54 mm diameter
• wire insulation made of homogeneous, colored HDPE; outer diameter: 0.97 mm
• external diameter of 5.9 mm
• packed in 305-meter self dispensing box.
Estore: Library: , , , , , , , , .

Warranty

15-year warranty.

Support

Any questions or comments?

  • Write to us!

Details

The NETSET BOX U/UTP cat 6 cable far exceeds the requirements for Category 6 twisted pair cables.
NETSET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
Reaction to fire: Dca - s2, d2, a1
  • Flame spread: Dca
  • Smoke production: s2
  • Flaming droplets: d2
  • Gases acidity: a1
Thanks to the fulfillment of such high criteria, the twisted pair can be used in buildings and their parts that have increased fire resistance requirements, e.g. in corridors, staircases or escape routes.
The NETSET BOX U/UTP CAT 6 E1614 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs).
The NETSET cable comes from the latest generation of UTP twisted pair cables. Its external diameter has been reduced to 5.9 mm, which considerably facilitates insertion of the cable into ducts and pipes. Special insulation material makes it easier to attach RJ-45 connectors.
Distinguishing features of the NETSET BOX U/UTP CAT 6 cable:
  • highest-quality materials, strict technological discipline confirmed by a 15-year quality guarantee,
  • reaction to fire: Dca-s2,d2,a1
  • parameters far exceeding the requirements for Category 6 twisted pair cables
  • preliminary quality control of materials and thorough tests of the final product,
  • meter markers, deviation less than 0.5%,
  • solid wires of 0.54 mm diameter,
  • wire insulation made of homogeneous, colored HDPE; outer diameter: 0.97 mm; colors: white-green/green, white-orange/orange, white-brown/brown, white-blue/blue,
  • pairs twisted together, outer diameter of ca. 4.0 mm,
  • packed in 305-meter self dispensing box.
The NETSET BOX U/UTP CAT 6 E1614 LAN cable is manufactured in compliance with the following standards:
EN50575:2014, EN60332-1-2:2004, EN50399:2011, EN60754-2:2014, EN 13501-6:2014.
The cable comes with a 15-year warranty.
The manufacturer guarantees stability of parameters at least for 15 years, on the condition that the cable is packed, transported, installed, and used according to adequate European standards (among others E-79100 and EN 50174-1), within the permissible environmental conditions.
The NETSET UTP cat 5e E1614 cable can be used in a wide temperature range: -20oC...+70oC, and installed between 0oC and +50oC. The minimum bending radius factor (radius to diameter ratio) is 8.
Test results
  • Return Loss
Frequency [MHz] Result (min.) [dB]
1 20,0
4 23,0
8 24,5
10 25,0
16 25,0
20 25,0
25 24,3
31,25 23,6
62,5 21,5
100 20,1
200 18
250 17,3
  • Attenuation
Frequency [MHz] Result (min.) [dB]
1 2,03
4 3,78
8 5,32
10 5,95
16 8,47
25 9,51
31,25 10,67
62,5 15,38
100 19,8
200 28,98
250 32,85

  • NEXT (near end crosstalk)
Frequency [MHz] Result (min.) [dB]
1 74,3
4 65,3
8 60,8
10 59,3
16 56,2
20 54,8
25 53,3
31,25 51,9
62,5 47,7
100 44,3
200 39,8
250 38,3

  • PSNEXT (power sum near end crosstalk)
Frequency [MHz] Result (min.) [dB]
1 72,3
4 63,3
8 58,8
10 57,3
16 54,2
20 51,3
31,25 49,9
62,5 45,4
100 42,3
200 37,8
250 36,3

  • ELFEXT (equal level far end crosstalk loss testing)
Frequency [MHz] Result (min.) [dB]
1 67,8
4 55,8
8 49,7
10 47,8
16 43,7
20 41,8
25 39,8
31,25 37,9
62,5 31,9
100 27,8
200 21,8
250 19,8

  • PSELFEXT (power sum equal level far end crosstalk loss testing)
Frequency [MHz] Result (min.) [dB]
1 64,8
4 52,8
8 46,7
10 44,8
16 40,7
20 38,8
25 36,8
31,25 34,9
62,5 28,9
100 24,8
200 18,8
250 16,8
The parameters show that NETSET BOX U/UTP CAT 6 E1614 fulfills all requirements for Category 6 cables, with a large safety margin.

Specifications

Name NETSET U/UTP cat. 6
Product type twisted-pair cable
Manufacturer Dipol
Brand NETSET
Cable type U/UTP
Applications Indoor
Category 6
Cable length m 305
CPR class Dca-s2,d2,a1
Physical properties
Conductor Material Cooper
Diameter mm 0.55
Conductor insulation Material HDPE (polyethylene)
Diameter mm 0.98
Twisted pairs colors white-brown/brown, white-blue/blue, white-orange/orange, white-green/green
sheath Diameter mm 6.1
thickness mm 0.55
Color RAL7032 (gray)
Gel filled No
Carrier cable No
Rip-cord Yes
Spline Yes
Length marker print error % <0.5
Electrical parameters
Impedance Ohm 100
Nominal Velocity of Propagation NVP % 67
Delay skew ns/100 m <45
DC resistance Ohm/100 m 9.38
Resistance asymmetry % <5
Return Loss 1 MHz ≥dB 20
4 MHz ≥dB 23
8 MHz ≥dB 24.5
10 MHz ≥dB 25
16 MHz ≥dB 25
20 MHz ≥dB 25
25 MHz ≥dB 24.3
62.5 MHz ≥dB 21.5
100 MHz ≥dB 20.1
200 MHz ≥dB 18
250 MHz ≥dB 17.3
Loss 1 MHz ≤dB 2
4 MHz ≤dB 3.78
8 MHz ≤dB 5.32
10 MHz ≤dB 5.95
16 MHz ≤dB 7.55
20 MHz ≤dB 8.47
25 MHz ≤dB 9.51
31.25 MHz ≤dB 10.5
62.5 MHz ≤dB 15.38
100 MHz ≤dB 19.8
200 MHz ≤dB 28.98
250 MHz ≤dB 32.85
NEXT (near-end crosstalk) 1 MHz ≤dB 74.3
4 MHz ≤dB 65.3
8 MHz ≤dB 60.8
10 MHz ≤dB 59.3
16 MHz ≤dB 56.2
20 MHz ≤dB 54.8
25 MHz ≤dB 53.3
31.25 MHz ≤dB 51.9
62.5 MHz ≤dB 47.7
100 MHz ≤dB 44.3
200 MHz ≤dB 39.8
250 MHz ≤dB 38.3
PSNEXT (power sum near-end crosstalk) 1 MHz ≥dB 72.3
4 MHz ≥dB 63.3
8 MHz ≥dB 58.8
10 MHz ≥dB 57.3
16 MHz ≥dB 54.2
20 MHz ≥dB 52.8
25 MHz ≥dB 51.3
31.25 MHz ≥dB 49.9
62.5 MHz ≥dB 45.4
100 MHz ≥dB 42.3
200 MHz ≥dB 37.8
250 MHz ≥dB 36.3
ELFEXT 1 MHz ≥dB 67.8
4 MHz ≥dB 55.8
8 MHz ≥dB 49.7
10 MHz ≥dB 47.8
16 MHz ≥dB 43.7
20 MHz ≥dB 41.8
25 MHz ≥dB 39.8
31.25 MHz ≥dB 37.9
62.5 MHz ≥dB 31.9
100 MHz ≥dB 27.8
200 MHz ≥dB 21.8
250 MHz ≥dB 19.8
PSELFEXT (power sum far-end crosstalk) 1 MHz ≥dB 64.8
4 MHz ≥dB 52.8
8 MHz ≥dB 46.7
10 MHz ≥dB 44.8
16 MHz ≥dB 40.7
20 MHz ≥dB 38.8
25 MHz ≥dB 36.8
31.25 MHz ≥dB 34.9
62.5 MHz ≥dB 28.9
100 MHz ≥dB 24.8
200 MHz ≥dB 18.8
250 MHz ≥dB 16.8
Mechanical properties
Operating temperature °C -20...+70
Installation temperature °C 0...+50
Minimum bending radius for indoor installation Diameter >8

Videos

Crimping an RJ45 plug on a cat. 6 UTP cable

  • 2018-11-20

A short instructional video on crimping RJ-45 connector on a category 6 UTP cable, according to the EIA/EIA 568B standard. The items used: NETSET U/UTP cat. 6 cable, 8-pin RJ-45 modular plug, modular plug boot, HT-210N crimping tool, cable tester NS-468AT.

RJ45 plug on UTP cable - Installing

  • 2010-02-25

How to attach RJ-45 connector to cat 5 UTP cable? Male RJ-45 connector J2008 (8P8C category 5e for UTP/FTP cables with solid wires) used for computer network cables. NETSET BOX UTP CAT 5e E1408 cable is the highest-quality twisted pair cable designed for professional data transmission systems inside buildings (structural wiring, LANs). Crimping Tool HT-210N J9210 for RJ-45 plugs. Cable Tester (RJ-45, RJ-11) N7055 helps installers to build LAN systems and service existing networks. It tests cable continuity, detects shorts circuits and incorrect connections. The device can be used for UTP/FTP cables terminated with RJ-45 connectors or for telephone cables terminated with RJ-11 phone plugs.