Support
Details
CAMSET 100 M6100 is a top quality cable designed for powering analog CCTV cameras and transmitting video signal. Its 1.0 mm2 intersection of power wires allows to double the distance of power supplying, compared with typical CCTV cables. It is produced by renown European cable plant.
The latest high-performance analog CCTV cameras require appropriate quality of transmission medium. It is unacceptable to use them with low-quality, quickly degrading cables.
CAMSET cables have excellent parameters and are produced under strict technological discipline. They guarantee perfect and stable video transmission.
CAMSET cables have excellent parameters and are produced under strict technological discipline. They guarantee perfect and stable video transmission.
- highest-quality materials, strict technological discipline confirmed by a 6-year quality guarantee,
- 92% copper braid coverage,
- two copper power wires up to 230V AC, of 1.0 mm2 intersection (each wire),
- wide temperature range of installation and operation,
- preliminary quality control of materials and thorough tests of the final product,
- typical size of RG-59 cable: copper core diameter - 0.59 mm, braid diameter - 3.7 mm, outer diameter - 6.15 mm,
- meter markers,
- three packagings:
200m M6000_200 (coil covered with foil),
500m M6000_500 (spool).
The CAMSET family consists of:
Every CAMSET cable has the same coaxial part.
Composite CAMSET 100 M6100 cable consists of coaxial part and two insulated copper wires of 1.0 mm2 intersection (each wire) for powering cameras. The thickness of their double insulation allows to power the camera even from 230V AC line. So the cable can operate at typical voltages of 12, 24, 115, and 230 V.
The conductor made of stranded copper wire of 0.5 mm2 intersection at 20 oC has resistance of 39 ohm/km, another one of 1.0 mm2 intersection - 19.5 ohm/km. A typical CCTV camera consumes 150 to 250 mA. Taking the upper value, according to the Ohm's Law the maximum distance of supplying power is about 60 m for CAMSET 50 2x0.5 mm2, and about 120 m for CAMSET 100 2x1.0 mm2.
More on powering CCTV cameras with composite cables (coaxial cables with additional power wires) you can read in the article Internet CCTV GUIDE - power supplies and accessories.
More on powering CCTV cameras with composite cables (coaxial cables with additional power wires) you can read in the article Internet CCTV GUIDE - power supplies and accessories.
CAMSET cables come with a 6-year warranty.
The warranty covers all manufacturing flaws that could be an effect of using defected materials, improper technical solutions or production process.
The manufacturer guarantees stability of the parameters given in the "Specifications" at least for six years, on the condition that the cable is packed, transported, installed, and used according to adequate European norms, within the listed environmental conditions (see the Specifications below).
CAMSET solo M6000, CAMSET 50 M6050, CAMSET 100 M6100 have braid made with 80 copper wires of 0.20 mm diameter, which ensures 92% braid coverage. Such thick braid, compliant with the highest standards, ensures effective electromagnetic shielding. It eliminates the influence of external electromagnetic fields and does not allow to radiate any significant part of the energy of the transmitted signal as electromagnetic field. In the market there are many types of cables with various parameters. As a decent standard there are recognized coaxial cables with braided screen composed of 64 wires of 0.15 mm diameter. The cables offered by DIPOL have even more wires, made of copper (instead of popular aluminum braid that has not stable parameters and is prone to corrosion).
- strength testing of the sheath made of modified PVC (tensile test before and after aging process in thermal chamber: 100 oC / 168 hours, -30oC / 20 hours),
- resistance to squeezing at 80 oC,
- insulation resistance at 4.2 kV AC and 6.3 kV DC,
- resistance to winding stresses in low temperature (-55 oC),
- measurement of the resistance between conductors (min. 500 Mohm)
- resistance to test voltage of 2 kV AC, for 1 minute (after immersion in water),
- measurement of wave impedance,
- measurement of specific capacitance,
- resistance of power wire insulation to at least 600 V.
The first of the tests allows to confirm high mechanical parameters of the sheath, guarantying resistance to breaking and long life of the cables.
The CAMSET solo M6000, CAMSET 50 M6050, CAMSET 100 M6100 cables have been designed for indoor applications (lack of resistance to UV radiation). They can be used in a wide temperature range: -40...+70 oC (and installed between 0 and +50 oC). The sheath is made of white PVC (for outdoor applications there are usually used cables in black PE sheath).
CAMSET solo M6000 and the coaxial parts of CAMSET 50 M6050 and CAMSET 100 M6100 have the core made of copper wire of 0.59 mm diameter. The cables are compatible with the connectors suitable for RG-59.
Some manufacturers offer cheaper cables with steel wire covered with copper. This construction considerably increases attenuation of the signals transmitted in CCTV systems. It also makes such cables much more stiff, which is very inconvenient during installation process.
Some manufacturers offer cheaper cables with steel wire covered with copper. This construction considerably increases attenuation of the signals transmitted in CCTV systems. It also makes such cables much more stiff, which is very inconvenient during installation process.
CAMSET cables have length marks printed at intervals of one meter, which help to measure out desired sections. The marks are made by officially approved device.
The cables are available in 100 or 200 m rolled coils covered with foil, and 500 m spools. The coils enable the users to pull out relevant sections of the cable just out of the middle of the coil. For professional use we recommend the 500 m spools.
Name | CAMSET 100 |
Code | M6100 |
Impedance of coaxial cable [Ω] | 75 +/- 3 |
Capacitance of coaxial cable [pF] | 67 +/- 2 |
Wave reduction factor [%] | 66 |
Operating temperature [oC] | -40...+70 |
Operating relative humidity [%] | 0...100 |
Installation temperature [oC] | 0...+50 |
Minimum bending radius [radius to diameter ratio] | >5 |
Weight [kg/km] | 107 |
Coaxial core | |
Material | copper |
Structure | solid wire |
Diameter [mm] | 0.59 +/- 0.01 |
Resistance [Ω/km] | 59.2 |
Coaxial dielectric | |
Material | PE |
Outer diameter [mm] | 3.7 +/- 0.1 |
Braid | |
Percentage of braid coverage [%] | 92 |
Number of wires [pc] | 80 |
Wire diameter [mm] | 0,20 |
Resistance [Ω/km] | 7.6 |
Coaxial sheath | |
Material | PVC biały |
Outer diameter [mm] | 6.15 |
Thickness [mm] | 0.80 |
Power cables | |
Number of wires [pc] | 2 |
Intersection [mm2] | 1.0 |
Structure | stranded copper wire |
Maximum voltage [VAC] | 230 |
Resistance [Ω/km] | 19.5 |
Resistance of insulation at 70 oC [kΩ/km] | 13.0 |
Outer diameter [mm] | 6 |
Frequency [MHz] | Attenuation [dB/100m] |
1 | 1.0 |
50 | 7.7 |
100 | 11.1 |
200 | 16.2 |
300 | 20.4 |
500 | 27.2 |
800 | 35.5 |
1000 | 40.4 |
1500 | 50.1 |
2000 | 56.6 |
Installing Platinum BNC connector and S-55 quick adapter on CAMSET CCTV cable
Price for 200m