Ceiling IP Camera: Hikvision DS-2CD1323G0-I (2 MP, 2.8 mm, 0.028 lx, IR up to 30 m, H.265/H.264)

View of the camera

View of the connectors

The included accessories

Hikvision DS-2CD1323G0-I camera is dedicated for IP CCTV systems. The camera has been equipped with 1/2.8" CMOS sensor with 2 MP resolution and with IR illuminator made in EXIR 2.0 technology, ensuring good image quality without visible lighting within the range up to 30 m. The built-in 2.8 mm lens has 103° viewing angle. The camera can operate outdoors or indoors. Its housing with high ingress protection rating (IP67) protects the electronics against adverse weather conditions. The camera can be powered with a 12 VDC power source or via PoE (802.3af).

Name	HIKVISION DS-2CD1323G0-I
Code	K17253
Standard	IP
Housing	Ceiling
Direction adjustment	3-axis
Image sensor	1/2.8" Progressive Scan CMOS
Sensitivity	0.028 lux @ (F2.0, AGC ON), 0 lx in IR mode
Resolution	1920 x 1080
Frame rate	25 fps at 1920 x 1080 and lower res.
Focal length/viewing angle	2.8 mm / 103o
Video compression	H.265/H.265+/H.264/H.264+/MJPEG
Number of video streams	2
Bit rate range	32 kbps - 8 Mbps
IR illuminator range	30 m
Video enhancement functions	3D-DNR, DWDR, BLC, HLC
Mechanically switching IR filter	Yes
Gain	Automatic/Preset
Alarm events	Motion detection, dynamic analysis, video tampering
Intelligent image analysis	No
Corridor mode	No
ROI	Yes (1)
ANR function	No
Recording	NAS (NFS/SMB/CIFS), FTP (screenshots)
Network interface	RJ-45 10/100 Base-T
Protocols	TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Standards	ONVIF (S,G profile), PSIA, CGI, ISAPI
Housing materials	Metal and plastics
IP rating	IP67
Power supply	12 VDC ± 25%, PoE 802.3af
Power consumption	Max: DC 12V - 5W;  PoE - 7W
Operating temperature range	-30°C...+60°C
Dimensions	Φ110 × 93 mm
Weight	0.35 kg

The camera belongs to a new EasyIP Lite series characterized by high performance and affordable price. The series supports motion detection and video tampering detection. The cameras from the series also provide corridor mode and possibility of defining one Region of Interest (ROI).

H.265+/H.265 - higher compression rate with preservation of the image quality of H.264

The camera implements several video compression methods, H.265+, H.265, H.264+, H.264, MJPEG. Compared with H.264, H.265 can reduce by half the data stream, which translates into proportional savings of the disk space or into extended data retention time. H.265+ and H.264+ are Hikvision standards based on the original systems and optimized for CCTV applications. They further minimize the streams in typical video surveillance scenarios. With the advanced video compression algorithms, the camera can be used in IP CCTV systems based on modern NVRs implementing H.265 standard (the DS-76/77/96NI-I/K series supports H.265+, H.265, H.264+, H.264). Of course, the camera can also operate with older models supporting H.264 (the DS-76/77NI-E series supports H.264+, H.264).

The iVMS 4200 client software enables users of HIKVISION devices to manage them in IP networks. The software allows for configuration and management of NVRs/DVRs, IP and analog cameras (in hybrid systems). The iVMS 4200 utility can remotely manage up to 256 devices, with the use of up to 4 monitors. One monitor can display up images from up to 64 cameras. Aside from system configuration and live monitoring, the utility can be used for remote playback, notifying, two-way audio transmission, creating multi-level e-maps.

View of the control panel of the iVMS-4200 application

Hik-Connect is a mobile application, intended for smartphones running Android or iOS operating systems. It can be used for remote live viewing of images from DVRs, NVRs, network cameras via Wi-Fi, 2G or 3G networks, and for playing back recorded video files. The application connects with the devices by IP addresses and/or through the P2P cloud.

Hik-Connect Hik-connect is also a network service for Hikvison devices. The service is based on data processing in the cloud and integrates the following functions:

The built-in powerful IR illuminator has a range of up to 30 m. The illuminator based on the EXIR 2.0 light-emitting technology has ca. 30% higher efficiency compared with traditional IR LED arrays. Additionally, the IR light in the form of a rectangle fits the camera's field of view. This further improves the efficiency of the lighting and eliminates the excessive light intensity in the central part of the scene, typical for majority of IR illuminators. Exir 2.0 illuminators ensure much better luminance uniformity, including corners of the scene, at the same time reducing light pollution in the surrounding environment. Compared with the previous version, EXIR 2.0 illuminators feature longer service life thanks to optimized heat dissipation, up to 20,000 hours.

SADP (Search Active Device Protocol) is a free and simple to use utility for searching Hikvision IP cameras and Hikvision DVRs/NVRs in the local network. The network device search tool can also be used for modification of network parameters of the Hikvision devices, including the change of passwords or recovery of default passwords. Detailed information on the software and its use is contained in the SADP application - LAN tool for organizing CCTV systems based on Hikvision devices article.