Ceiling IP Camera: Hikvision DS-2CD2120F-I (2MP, 2.8mm, 0.07 lx, IK10, IR up to 30m)

Code: K1732
This product is no longer available
Estore: Library:

Support

Details

Ceiling IP Camera: Hikvision DS-2CD2120F-I (2MP, 2.8mm, 0.07 lx, IK10, IR up to 30m)
General view of the camera

Ceiling IP Camera: Hikvision DS-2CD2120F-I (2MP, 2.8mm, 0.07 lx, IK10, IR up to 30m)
Ceiling IP Camera: Hikvision DS-2CD2120F-I (2MP, 2.8mm, 0.07 lx, IK10, IR up to 30m)
Views of the micro SD card slot and connectors
Ceiling IP Camera: Hikvision DS-2CD2120F-I (2MP, 2.8mm, 0.07 lx, IK10, IR up to 30m)
The included accessories, among others, the cable fitting for protecting against water penetration
Ceiling IP Camera: Hikvision DS-2CD2120F-I (2MP, 2.8mm, 0.07 lx, IK10, IR up to 30m)
View of the packaging
The DS-2CD2120F-I K1732 camera is dedicated for anyone who wants to build cost-effective IP CCTV system. The ceiling camera has been equipped with high quality 2 MP CMOS sensor providing perfect video even in low-light conditions and without visible lighting (in IR mode).
Thanks to H.264 compression, the data stream is minimized. The user can configure two independent streams (primary and secondary), as well as choose H.264 or MJPEG compression and limit the bandwidth within 32 kbps to 16 Mbps range.
The DS-2CD2120F-I camera can operate outdoors or indoors. Its housing with high ingress protection rating (IP66) protects the electronics against adverse weather conditions. The built-in IR illuminator has operation range of up to 30 m. The camera can be powered with a 12 VDC power source or via PoE (802.3af).
The camera has microSD card slot. In connection with Hikvision IP NVRs, the ANR (Automatic Network Replenishment) solution developed by Hikvision company limits the recording on the card only to the periods of problems with connectivity between the camera and NVR. After the end of the failure, the emergency recordings are automatically transferred to the NVR. The recording redundancy significantly increases the reliability of video surveillance systems.
Key features
  • Max resolution: 2 MP (1920x1080)
  • Functions: 3DDNR, DWDR, BLC
  • IP rating: IP66
  • Vandal-proof rating: IK10
  • Three ROIs
  • IR range: up to 30 m
  • MicroSD/microSDHC/microSDXC card slot supporting cards up to 64 GB
  • Mechanically switching IR filter
The degree of protection (IK rating) provided by enclosures for electrical equipment against external mechanical impacts is defined in the EN 62262 standard. The EN 62262:2003 standard specifies the conditions of the testing procedure.
The K1732 camera is rated IK10.
IK code
Protection Impact equivalent
Impact energy
Free fall hammer - mass ... height
IK06 1 J 0.5 kg …... 20 cm
IK07 2 J 0.5 kg …... 40 cm
IK08 5 J 1.7 kg … 29.5 cm
IK09 10 J 5 kg …...... 20 cm
IK10 20 J 5 kg …...... 40 cm
Specifications
Name HIKVISION DS-2CD2120F-I

Code

K1732
Video system
IP
Housing type
Ceiling
Compression
H.264/MJPEG
Resolution 1920x1080
Dual-stream Yes
Frame rate
25 fps at 1920x1080 or lower res.
Image sensor
1/3" Progressive Scan CMOS
Sensitivity 0.07 lx @F1.2 with AGC ON
0 lx in IR mode
Focal length 2.8 mm
Horizontal viewing angle
98.5o
Mechanically switching IR filter
Yes
Brightness control
Yes
Sharpness control
Yes
Gain Automatic/Preset
Alarm events Motion detection, dynamic analysis, tampering
Recording NAS
Video backup
FTP server
ROI
Yes (3)
Network interface
RJ-45 10/100Base-T
Protocols TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP,
PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
ONVIF Yes
Card slot microSD/microSDHC/microSDXC
IP, IK ratings
 IP66, IK10
Power 12 VDC ± 10%
PoE IEEE 802.3af
Power consumption
5 W (max 7 W with IR)
Startup temperature range
-10°C ... 40°C
Operating temperature range
-30°C ...  60°C
Dimensions Φ111 × 82 mm
Weight 0.5 kg