€243.04
Price | Disc. | Quantity | Validity |
---|---|---|---|
€243.04 | 0 % | from 1 piece |
Available
Replacements
The Hikvision DS-2CD2143G2-I IP ceiling camera, part of the EasyIP 2.0 Plus Series, implements the AcuSense technology.
• Sensor 1/3" Progressive Scan CMOS
• Resolution 4 MP - 2688 x 1520 @ 25 fps
• Fixed lens 4 mm (F1.6)/84°
• Uniform illumination at night with EXIR technology: IR up to 30 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification (motion detection 2.0, line crossing, intrusion detection)
• Face detection
• Support for microSD cards up to 256 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI
• ANR function
• Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Protection rating: IP67, IK10
• 12 VDC or PoE (802.3af) power supply
• Resolution 4 MP - 2688 x 1520 @ 25 fps
• Fixed lens 4 mm (F1.6)/84°
• Uniform illumination at night with EXIR technology: IR up to 30 m
• Video compression H.265+/H.265/H.264+/H.264/MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent image analysis VCA based on object classification (motion detection 2.0, line crossing, intrusion detection)
• Face detection
• Support for microSD cards up to 256 GB
• Three streams supported
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI
• ANR function
• Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Protection rating: IP67, IK10
• 12 VDC or PoE (802.3af) power supply
Details
The Hikvision DS-2CD2143G2-I ceiling camera, part of the EasyIP 2.0 Plus series, implements the AcuSense technology, based on the deep learning algorithm. Therefore, in case of motion detection events and VCA analysis (crossing a virtual line, detection of intrusion) there is a filter that allows you to classify objects of the human/vehicle type and filter out all other events that do not meet the criterion (rain, walking animals, moving trees, falling leaves, etc.). If the filter is not selected the events will be handled unclassified, as in previous solutions. The model being described is dedicated for use in monitoring systems based on IP DVRs. It is equipped with a 4 MP and 1/3" CMOS sensor and an IR illuminator based on EXIR technology with a range up to 30 m to ensure proper visibility in low-light conditions. It has a fixed 4 mm lens with a viewing angle of 84°. Support for the legacy and latest H.265(+) compression methods allows for the archiving time of recordings to be extended while maintaining excellent image quality and backward compatibility. Additional functions to help improve image quality including: AGC, 3D-DNR, WDR (120 dB), BLC, HLC and built-in image analytic functions (VCA) make the camera suitable for use in even more advanced projects. The IP67 rated housing protects the inside electronic components from adverse weather conditions. The camera can be powered conventionally with 12 VDC or through PoE (compliant with the 802.802.3af standard).
NOTE! Current software version is available
here
here
Key features:
- sensor 1/3" Progressive Scan CMOS,
- resolution 4 MP – 2688x1520 @ 25 fps,
- fixed lens 4 mm (F1.6)/84°,
- uniform illumination at night with EXIR technology: IR up to 30 m,
- video compression H.265+/H.265/H.264+/H.264/MJPEG,
- AcuSense technology (false alarm filter, object classification: human, vehicle),
- intelligent VCA image analysis based on object classification (motion detection 2.0, line crossing, intrusion detection),
- face detection,
- support for microSD cards up to 256 GB,
- three streams supported,
- image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC,
- regions of interest ROI,
- ANR function,
- application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS),
- access via P2P cloud,
- protection rating: IP67, IK10,
- power supply DC 12 V or PoE (802.3af).
This camera is part of the EasyIP 2.0 Plus series with AcuSense technology, which is based on Deep Learning algorithms. With AcuSense, the camera is able to classify detected human and vehicle objects and filter out all false alarms (e.g. animals, rain, cobwebs, moving leaves, etc.) with an efficiency up to 98%. This improves the entire monitoring system performance, and the end user only receives information about alarms that meet the criteria. If the filter is not activated for a given event, the camera will detect all objects, as it was the case with previous solutions.
False alarm filtering in all channels and quick object search. Color images around the clock for ColorVu cameras with AcuSense. | Filtering out false alarms and quick object search in selected channels | False alarm filtering for AcuSense cameras. Color images around the clock for ColorVu cameras with AcuSense. | Color image 24/7. Filtering out false alarms and quick object search in selected channels |
The motion detection has been enhanced with AcuSense technology, allowing events to be filtered for human and vehicle silhouettes. This improves the performance of the entire system and reduces the number of false alarms that reach the user. Once the filter is turned off, detection can continue as before, detecting all objects.
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
H.265/H.265+ - higher compression ratios with preserving video quality provided by H.264
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
A mobile application Hik-Connect is dedicated to operate Hikvision devices using cell phones with the operating system Android or iOS. It can be used to remotely view live video from DVR, NVR, network cameras, video intercoms using Wi-Fi, 2G or 3G networks as well as to view recorded video. Video intercoms can be operated with the application which additionally allows for remote opening of electric doors, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the resident. The application supports connectivity via IP and the P2P cloud. Hik-Connect is also the name of a cloud-based service that allows access to devices in the absence of an external IP address.
The degree of protection (IK rating) against external mechanical impacts offered by electrical equipment housing is defined in the EN 62262 standard. The EN 62262:2003 standard also specifies the conditions of the testing procedure.
The camera has an IK10 rating.
| |||||||||||||||||||||
Extensive applications for the organization and use of CCTV systems
Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.
SADP (Search Active Device Protocol) is a free, easy-to-use utility designed to search for Hikvision IP cameras and DVRs/NVRs in the local network. The network device search tool can also be used to modify device network parameters, e.g. to change or recover default passwords. Detailed information on the software, its use and password recovery (par. 8) can be found in the following article: SADP application - LAN tool for organizing CCTV systems based on Hikvision devices.
Specifications
Model | DS-2CD2143G2-I | ||
Product type | IP camera | ||
Brand | Hikvision | ||
Series | EasyIP 2.0 Plus, Standardowa | ||
Technologie | AcuSense | ||
type | Standard | ||
Applications | Outdoor | ||
Housing | Dome, Vandal-proof | ||
Adjustment | 3-axis | ||
Color | White | ||
Reset button | Yes | ||
Moduł optyczny i obraz | |||
Sensor type | CMOS | ||
Sensor size | 1/3 | ||
Sensitivity (color mode) | lx | 0.005 @ (F1,.6, AGC ON) | |
Aperture | F1,6 | ||
Shutter speed | S | 1/3 – 1/100000 | |
Slow shutter | Yes | ||
Lens type | Fixed | ||
Focal length | mm | 4 | |
Viewing angle | horizontal | ° | 84 |
Main stream | max. resolution | MP | 4 |
max. resolution | px | 2688 × 1520 | |
max. resolution | fps | 25 | |
Other image functions | AGC, AWB, 3D-DNR, BLC, HLC | ||
WDR | dB | 120 | |
Regions of interest ROI | 1 | ||
Corridor mode | Yes | ||
Day/night mode | Yes (ICR) | ||
Illuminator | |||
IR | Range | m | 30 |
wavelength | nm | 850 | |
illuminator type | EXIR | ||
Video compression | |||
Compression methods | H.265+, H.265, H.264+, H.264, MJPEG | ||
Bitrate | 32 kb/s – 8 MBps | ||
No. of streams | 3 | ||
Data recording | |||
microSD slot | Yes | ||
Recording types | MicroSD (max. 256 GB), NAS | ||
ANR function | Yes | ||
Image analysis (conventional algorithm) | |||
Basic incidents | Motion detection, Exception, Image tampering | ||
Advanced incidents | Scene change detection | ||
Intelligent image analysis (Deep Learning algorithm) | |||
Human, vehicle classification | Motion detection 2.0, Line crossing, Intrusion | ||
Other incidents | Fact capturing | ||
Network | |||
Protocols | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, PPPoE, NTP, UPnP, SMTP, IGMP, 802.1 × , QoS, Bonjour, IPv6, UDP, SSL/TLS | ||
Standards | Onvif (S,G profile), ISAPI, SDK | ||
Live view | 6 simultaneous channels | ||
Users | up to 32 (3 access levels: Administrator, Operator, User) | ||
Client applications | iVMS-4200, Hik-Connect, Hik-Central | ||
Supported browsers | Chrome 57,0+, Firefox 52,0+, IE10+ | ||
Interfaces | |||
Ethernet | 1 × RJ-45 10/100 MBps | ||
Others | |||
Power supply | PoE | V | 36-57 (802.3af) |
PoE | A | 0.2 – 0.15 | |
PoE | W | max. 6.5 | |
DC | V | 12 | |
DC | A | 0.4 | |
DC | W | max. 5 | |
Housing material | Aluminum alloy | ||
Protection rating | IP67, IK10 | ||
Operating temperature | °C | -30...+60 | |
Humidity | % | 95 or less (non-condensing) | |
Camera dimensions | mm | Φ111 × 85 | |
Weight | kg | 0.7 |