High quality N-male connector E84130 for use with Tri-Lan 240 and Belden H-155 cables. The connector can be used up to 6 GHz. It features low insertion loss and high return loss. 5-6 GHz systems require specially designed quality connectors that ensure optimal parameters. Tri-Lan 240 - low-loss cable.The cable guarantees not only efficient power transmission but also ensures savings on installation cost, in the process of migration from 2.4GHz to 5GHz band (it can work in both bands, so the cabling will not have to be replaced). The sheath of the cable is made of PE (UV-resistant), so Tri-Lan 240 can be used outdoors. Self-amalgamating SCAPA 2501 tape is based on PIB (Polyisobutylene) rubber. It is a versatile material for waterproofing, corrosion protection, jointing and repair of cables - used indoors and outdoors. Product properties and correct application ensure waterproof connections (for fresh and sea water) in a wide range of temperatures.
Price | Disc. | Quantity | Validity |
---|---|---|---|
€516.46 | 0 % | - | |
€438.99 | 15 % | from 1 piece | 2025-07-31 |
Available
Tri-Lan 240 WLL (external) used in 2.4 GHz and 5 GHz WLAN installations.
• Cable designed for 50 Ω installation: WLAN/GSM
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• 500 metres
• PE-coated outer cable
• UV resistant
• Low attenuation
• High screening efficiency (90 dB for 2.4 GHz)
• CPR class: Fca
• 500 metres
Details
In addition to low attenuation for low signal loss, the cable saves on installation costs. It can be used in 2.4 GHz and 5 GHz WLAN installations. Using it in 2.4 GHz systems will allow migration to 5 GHz without changing the cabling.
The sheath of the cable is made of PE (UV-resistant), so Tri-Lan 240 can be used outdoors.
Inner conductor made of 1.4 mm copper wire and double shield - first Al/PET/Al foil bonded to dielectric + 83% braid (tinned copper).
Key features:
- low loss (as far as 20% lower than of H155)
- perfect matching (30 dB at 2.4 GHz)
- high screening efficiency (90 dB at 2.4 GHz)
Cable of modern design, low attenuation, for operation up to 6 GHz.
TRILAN brand cables are compliant with the directive CPR and comply with the European standard EN 50575, which specifies the requirements for fire performance, test methods and evaluation of cables as building materials.
RoHS compliance declaration.
With this cable there can be used all connectors suitable for H-155 cable (working up to 2.4 GHz).
For 5GHz band we recommend the connectors working up to 6 GHz: N-plug
Maximum transmitted power
Frequency [MHz] | Power [kW] |
30 | 1.41 |
50 | 1.09 |
150 | 0.62 |
220 | 0.51 |
450 | 0.35 |
900 | 0.24 |
1500 | 0.19 |
1800 | 0.17 |
2000 | 0.16 |
2500 | 0.14 |
5800 | 0.09 |
Cable loss at 20°C
Frequency [MHz] | Attenuation [dB/100 m] |
30 | 4.2 |
50 | 5.4 |
150 | 9.2 |
220 | 11.2 |
450 | 16.2 |
900 | 23.3 |
1500 | 30.7 |
1800 | 33.9 |
2000 | 35.9 |
2500 | 40.6 |
5800 | 65.2 |

Loss versus frequency - 10m cable segment (measurements performed in CLBT).

Matching characteristics (measurements performed in CLBT).
Price for 500 m
Specifications
Product type | Coaxial cable | ||
type | Tri-LAN 240 | ||
Brand | Tri-Lan | ||
Applications | Outdoor | ||
Cable length | m | 500 | |
Cable class | RF240 | ||
CPR class | FCA | ||
Gel-filled cable | No | ||
Physical properties | |||
Impedance | Ohm | 50 | |
Conductor | Material | Coper | |
Conductor | Diameter | mm | 1.4 |
Dielectric | foaming | Physical | |
Dielectric | Diameter | mm | 3.8 |
shield | |||
No. of plies | 1 | ||
First foil | bonded to dielectric | No | |
First foil | Material | Al foil/polyester/Al foil | |
Dimensions | μm | 12/15/12 | |
Braid | Material | CuSn | |
Braid | wire diameter | mm | 16 × 7 × 0,12 |
braid coverage | % | 80 | |
sheath | Material | PE | |
sheath | Diameter | mm | 6.1 |
Color | RAL9005 (black) | ||
Electrical parameters | |||
Maximum transmitted power | 30 MHz | kW | 1.41 |
Maximum transmitted power | 50 MHz | kW | 1.09 |
150 MHz | kW | 0.62 | |
220 MHz | kW | 0.51 | |
450 MHz | kW | 0.35 | |
900 MHz | kW | 0.24 | |
1500 MHz | kW | 0.19 | |
1800 MHz | kW | 0.17 | |
2000 MHz | kW | 0.16 | |
2500 MHz | kW | 0.14 | |
5800 MHz | kW | 0.09 | |
Cable attenuation | 30 MHz | dB/100 m | 4.2 |
Cable attenuation | 50 MHz | dB/100 m | 5.4 |
150 MHz | dB/100 m | 9.2 | |
220 MHz | dB/100 m | 11.2 | |
450 MHz | dB/100 m | 16.2 | |
900 MHz | dB/100 m | 23.3 | |
1500 MHz | dB/100 m | 30.7 | |
1800 MHz | dB/100 m | 33.9 | |
2000 MHz | dB/100 m | 35.9 | |
2500 MHz | dB/100 m | 40.6 | |
5800 MHz | dB/100 m | 65.2 | |
Resistance at 20°C | core | Ω/km | 11.2 |
Resistance at 20°C | braid | Ω/km | 12.4 |
capacity | pF/m | 83 | |
Wave reduction factor | % | 81 | |
Mechanical properties | |||
Operating temperature | °C | -40...+70 | |
Minimum bending radius | mm | 30/60 | |
Weight | kg/km | 47 |