MY CART
My Cart is empty
 »  TV/SAT  »  Cables  »  CPR Eca

Cables

CPR Eca

Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Code: E1220_300
Price w/o taxPriceDisc.Validity  
78.88 EUR78.88 EUR0 %
5-year warranty
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
View of the cable
DIPOLNET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized European standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
DIPOLNET Tri-Shield RG-6 Cu E1230 75 ohm coaxial cable has been examined by ISSeP notified body (NB 2659) and got Eca classification according to EN 13501-6 (reaction to fire).
The DIPOLNET Tri-Shield RG-6 Cu E1220 cable EN50117 fulfills the requirements
for class A (screening efficiency) of the EN50117 standard in the 5...3000 MHz band.
RoHS compliance declaration.
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Close-up of the cable
Structure of the cable
High quality 75 ohm coaxial cable Tri-Shield DIPOLNET E1220_300 is dedicated for individual and shared TV/SAT antenna systems. The cable is suitable for distributing terrestrial DVB-T, DAB, FM broadcasts and satellite DVB-S/S2 channels, also in multiswitch systems (SMATV).
Key features
  • complies with A-class requirements
  • 1.02 mm copper core
  • low loss
  • perfect impedance matching
  • high screening efficiency: A+ class in the vast majority of the transmission range
  • min 77% braid coverage
DIPOLNET Tri-Shield RG-6 Cu cable has a braid coverage of 77%, which is the basis for high screening efficiency.
The high-quality, triple-shielded coaxial cable of RG6 category has the inner conductor made of copper wire with a diameter of 1.02 mm, which ensures low loss and durability. The copper wire core does not corrode and the cable is not stiff.
Thanks to high quality and excellent parameters, the cable enjoys great popularity among many installers. An optimum flexibility of the jacket allows for easy installation of the cable in cable ducts and installation boxes.
The cable is manufactured under strict technological discipline, with tight tolerances.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective tubes.
Signal distribution networks in SMATV systems use multiple coaxial cables arranged in parallel. The lengths of the cable bundles in buildings can reach even 100 meters. It is the reason why the coaxial cables should be characterized by at least the A class of screening efficiency. Effective shielding reduces the crosstalk among the cables, i.e. the unwanted signals coming from adjacent cables. The interference could lead to image distortions or even image "freezing", similarly to situations with weak or low quality signals. High quality TRISET coaxial cables guarantee the required level of isolation between signal paths.

The DIPOLNET Tri-Shield RG-6 Cu cable E1220 has been tested by
Telecommunications Equipment Testing Laboratory of the National Institute of Telecommunications in Warsaw
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Shielding effectiveness of DIPOLNET Tri-Shield RG-6 Cu cable in 30-3000 MHz range
and the requirements for class A and class A+

Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Transfer impedance of DIPOLNET Tri-Shield RG-6 Cu cable in 5-30 MHz range
and the requirements for class A and class A+
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Insertion loss in the 5-3000 MHz range
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Insertion loss in the 5-3000 MHz range and Smith chart showing the impedance of the cable. The measurements were taken at two ends of 100 m cable length. Deviations from the nominal value of 75 Ω not exceeding 1% ensure perfect impedance matching in the transmission path.
Specifications
NameDIPOLNET RG-6 Cu
CodeE1220_300
 tolerance
Copper core (inner conductor)
Diametermm1.02± 0.01
Physically foamed dielectric
Dielectric diameter
mm4.80± 0.1
Ovality < 0.30 mm 
First Al/P/Al foil
Layersµm10/15/10 
Total thicknessµm41± 5
Braid
Material
Aluminum
Wire diameter
mm0.12± 0.004
Number of wires
pc.16 x 8 
Winding angle
deg26.69 
Braid coverage
% 77min
Second Al/P/Al foil
Layersµm10/15/10 
Total thicknessµm41± 5
Sheath (jacket)
Material
PVC
Thicknessmm0.7 
Diametermm7.0± 0.2
ColorWhite
Electrical parameters
Resistance at 20°CΩ/km≤22.0 (core)
≤32.0 (shielding)  
 
CapacitancepF/m52.5± 3
Impedance
Ω75 ± 3
Wave reduction factor
%80 
Environmental and mechanical parameters
Operating temperature range°C-20...+70 
Installation temperature range°C-10...+40 
Minimum bending radius
mm70
Weightkg/km45 

 

According to EN50117 norm, there are the next classes of coaxial cables, depending on screening efficiency: C, B, A, A+, A++.
Classes of screening efficiency
Class\freq. range
5-30 MHz [mΩ/m]30-1000 MHz [dB]1-2 GHz [dB]2-3 GHz [dB]
C50756555
B1575 6555
A585 7565
A+2.595 8575
A++0.9105 9585

 

 

Coaxial Cable (75 ohm): TRISET PROFI 120dB A++ 1.13/4.80/6.90 [100m]Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 [1m]Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]

Price for 300m
Price w/o taxPriceDisc.Validity  
78.88 EUR78.88 EUR0 %
 
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu 1.02/4.8/7.0 [300m]
Code: E1220_300
COMPLETE WITH
SECTION LIBRARY
LIBRARY NEW TITLES
TO KNOW MORE