Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]

Code: E1017_1
Price Disc. Quantity Validity
€0.67 0 % from 1 piece
High-quality TV/satellite coax (A-class, 16.65dB/100m at 860 MHz) in PE sheath, gel-filled. For outdoor applications.


5-year warranty.



Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
Close-up of the cable
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
81% braid (aluminum) coverage.
The high quality coaxial cable Triset-113 PE E1017_1 is used in individual and community antenna installations, SMATV systems etc., for distribution of DVB-T, FM/DAB, DVB-S/S2 broadcasts (also in multiswitch systems). Thanks to PE coating, the gel-filled cable can be installed outdoors, e.g. for connecting antennas placed on roofs etc.
Cable structure.
Key features
  • complies with A-class requirements
  • passed IEC 68-2-3 Steady State Damp Heat test
  • 1.13 mm copper core
  • low loss
  • perfect matching,
  • high screening efficiency - A+ class in the vast majority of the transmission range
  • 81% braid coverage
  • 5-year warranty
TRISET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized standard that specifies reaction to fire performance requirements, test and assessment methods for electric cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
TRISET-113 cables comply with the EN50117 standard and A-class requirements in the whole 5...3000 MHz transmission frequency range.
RoHS compliance declaration.

The cable is sold in the quantities:
Triset-113 PE E1017_1 cable has a braid coverage of 81%, which is the basis for high screening efficiency.
The high-quality, double shielded coaxial cable of RG6 category has the inner conductor made of copper wire with a diameter of 1.13 mm, which ensures low loss and durability. The copper wire core does not corrode and the cable is not stiff.
Thanks to high quality and excellent parameters, the cable enjoys great popularity among many installers. An optimum flexibility of the jacket allows for easy installation of the cable in cable ducts and installation boxes.
The cable is manufactured under strict technological discipline, with tight tolerances.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective tubes.
Screening efficiency of TRISET-113 cable in the 30-3000 MHz range
and the requirements for A class
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
Transfer impedance of TRISET-113 cable in 5-30 MHz range
and the requirements for A class
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
Insertion loss in the 5-2400 MHz frequency range
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
Return loss in the 5-2400 MHz frequency range
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
Signal propagation velocity in the 5-2400 MHz frequency range
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
The increase of attenuation after the accelerated aging test (IEC68-2-3) is below 5%
Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]
Coaxial cables undergo a natural aging process which results in increasing attenuation. The quality of a cable in the process of accelerated aging is tested according to IEC68-2-3 standard. The Triset cable passed the test and its quality is guaranteed by a 5-year warranty.

Copper core
Diametermm1,13± 0,03
Physically foamed dielectric
Thicknessmm1,83± 0,05
Diametermm4,80± 0,1
Ovality (non-circularity) ± 2% 
Al/PET/Al foil  30/12/30 µm
adhered to the dielectric
Widthmm18 ± 0,3
Overlap mm >3 ± 0,5
Total thicknessµm75 ± 3
Wire diameter
mm0,12± 0,01
Number of wires
pc24 x 6 
Winding angle
Braid coverage%81 
Thicknessmm0,8± 0,1
Electrical parameters
Resistance (20°C)Ω/km16,85   ± 0,5
CapacitancepF/m52 ± 1,5
Dielectric resistanceMΩ/km2000± 3%
Ω75 ± 3
Wave reduction factor%84 ± 1
Mechanical parameters
Operating temperature range
Installation temperature range
Minimum bending radius
mm35 (single)
70 (repeated)


According to EN50117 norm, there are the next classes of coaxial cables, depending on screening efficiency: C, B, A, A+, A++.
Taking into consideration cables for antenna systems, Triset 113 has the highest screening efficiency, between A and A+.
Classes of screening efficiency
Class\freq. range
5-30 MHz [mΩ/m] 30-1000 MHz [dB] 1-2 GHz [dB] 2-3 GHz [dB]
C 50 75 65 55
B 15 75  65 55
A 5 85  75 65
A+ 2.5 95  85 75
A++ 0.9 105  95 85



Price for 1m


Product type Coaxial cable
type TRISET 113
Cable length m per meter
Applications Outdoor
Cable class RG-6
CPR class FCA
Gel-filled cable Yes
Physical properties
Impedance Ohm 75
Screening efficiency class A
Transfer impedance TI mΩ/m <5
Conductor Material Coper
Diameter mm 1,13
Dielectric foaming Physical
Diameter mm 4,8
No. of plies 2
First foil bonded to dielectric Yes
Material Al/PET/Al
Dimensions μm 30/12/30
total thickness μm 75
Braid Material Aluminium
wire diameter mm 0,12
no. of wires pcs. 24 × 6
winding angle degree 19,34
braid coverage % 81
sheath Material PE
thickness mm 0,8
Diameter mm 6,8
Color Black
Electrical parameters
Resistance at 20°C Ω/km 16,85
capacity pF/m 52
Wave reduction factor % 84
Mechanical properties
Operating temperature °C -30...+70
Installation temperature °C -5...+40
Minimum bending radius mm 35 (single) 70 (repeated)