This website uses cookies

We use cookies , which makes our store reliably and adapt to you. Cookies allow you to match content and promotion to your interests.

If you do not agree, it will not affect the display of ads, but they will not match you.

Cookies required for our store to work
Cookies we use to identify Your needs
Cookies we use to personalize ads
Cookies we use to improve the store
Settings Save Reject all Accept all

Coaxial Cable 75 ohm: Tri-Shield DIPOLNET RG-6 Cu Eca class A+ 1.13/4.8/7.0 110 dB [500m]

  2. CCTV
  3. Cables
  4. Coaxial cables TV-SAT, CCTV
  • Przewód koncentryczny RG-6 Tri-Shield DIPOLNET - rolka 500 m
  • Zbliżenie przewodu Tri-Shield DIPOLNET RG-6 Cu
Code: E1215_500
This product is no longer available
Replacements
Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [500m] Code: E1015_500
Estore: Library: , , , , , , , , .

Support

Any questions or comments?

  • Write to us!

Details

High quality Tri-Shield DIPOLNET coaxial cable is E1215_500 dedicated for individual and SMATV antenna systems. It can be used for distribution of DVB-T, FM/DAB, DVB-S/S2 broadcasts (also in multiswitch systems).
It has an inner cooper conductor with a diameter of 1.13 mm and triple shield (Al/PET/AI foil (first) + 77% density braid + Al/PET/AI foil (second)).
Key features:
  • complies with A+ class requirements
  • 1.13 mm copper core
  • low insertion loss
  • excellent impedance matching
  • high screening efficiency - meeting the class A++ requirements in most of the range
  • 77% braid coverage
For more on cable fire resistance classes, read The CPR Directive - the new cable order
DIPOLNET cables are compliant with Construction Products Regulation (CPR) and EN 50575 harmonized standard that specifies reaction to fire performance requirements, test and assessment methods for cables used for the supply of electricity and for control and communication purposes, which are intended for use in construction works and subject to performance requirements on reaction to fire.
The RG-6 Tri-Shield coaxial cable DIPOLNET E1215 meets the EN50117 standard for shielding (class A+) in the frequency band 5-3000 MHz.
Tri-Shield Coaxial Cable DIPOLNET E1215_500 complies with the requirements of the Regulation of the Ministry of Transport, Construction and Maritime Economy on technical conditions to be met by buildings and their location of November 22, 2012, for the cabling dedicated to TV/SAT systems.
RoHS compliance declaration.
The Regulation in § 192e item 4 specifies the following requirements for coaxial cables in teletechnical systems in buildings of collective residence:
Requirements DIPOLNET specification
Category RG-6 or higher The DIPOLNET family cable is the
RG-6 category cable
Double shield:
- Al foil
- ≥ 77% density braid		 Triple shield:
- AI foil
- 77% braid
- Al foil
Cooper inner conductor
with at least 1 mm diameter		  Cooper conductor with a diameter of 1.13 mm
Class A Screening efficiency
0.03...1 GHz ≥ 85 dB
1...2 GHz ≥ 75 dB
2...3 GHz ≥ 65 dB		 Screening efficiency
0.03...1 GHz ≥ 102 dB
1...2 GHz ≥ 100 dB
2...3 GHz ≥ 105 dB
 Transfer impedance < 5 mΩ/m  Transfer impedance ≤ 1.68 mΩ/m
Tri-Shield DIPOLNET E1215_500 cable has 77% braid coverage to guarantee high screening efficiency and protect the transmitted signals against interference.
High quality, triple shielded RG6 coaxial cable has an inner conductor made of 1.13 mm diameter copper wire, which ensures very low insertion loss. The core dose not corrode, and the cable is not stiff.
The cable is manufactured under strict quality standards, with tight tolerances. Optimum flexibility of the sheath allows for easy cable installation in shafts, as well as installation or junction boxes.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective conduits.
In the case of parallel arrangement of many cables and long cable runs it is recommended to use cables of TRISET series. Effective screening over long distances eliminates the probability of cable crosstalk. It consists in induction of unwanted signals in neighboring cables. It is manifested on the screen by image interference: pixelosis and freezing of scenes as it occurs in the case of a weak or low quality signal.
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu Eca Class A+ 1.02/4.8/7.0 [300m]
Shielding effectiveness of DIPOLNET Tri-Shield RG-6 Cu cable in 30-3000 MHz range
and the requirements for class A, A+ and A++.

Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu Eca Class A+ 1.02/4.8/7.0 [300m]
Transfer impedance of DIPOLNET Tri-Shield RG-6 Cu cable in 5-30 MHz range. Cable fullfil requirements for class A+.
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu Eca Class A+ 1.02/4.8/7.0 [300m]
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu Eca Class A+ 1.02/4.8/7.0 [300m]
Insertion loss in the 5-3000 MHz range
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu Eca Class A+ 1.02/4.8/7.0 [300m]
Coaxial Cable (75 ohm, class A): DIPOLNET Tri-Shield RG-6 Cu Eca Class A+ 1.02/4.8/7.0 [300m]
Insertion loss in the 5-3000 MHz range and Smith chart showing the impedance of the cable. The measurements were taken at two ends of 100 m cable length. Deviations from the nominal value of 75 Ohm not exceeding 1% ensure perfect impedance matching in the transmission path.
According to the EN50117 norm,coaxial cables are divided into the following classes, depending on their screening efficiency: C, B, A, A+, A++.
Classes of screening efficiency
Class\freq. range
 5-30 MHz [mΩ/m] 30-1000 MHz [dB] 1-2 GHz [dB] 2-3 GHz [dB]
C 50 75 65 55
B 15 75  65 55
A 5 85  75 65
A+ 2.5 95  85 75
A++ 0.9 105  95 85

 

 

Specifications

Product type Coaxial cable
type RG-6 TRI-SHIELD
Brand DIPOLNET
Cable length m 500
Applications Indoor
Cable class RG-6
Compliance with relevant national legislation Yes
CPR class Eca
Gel-filled cable No
Physical properties
Impedance Ohm 75
Screening efficiency class A+
Transfer impedance TI mΩ/m <1,68
Conductor Material Coper
Diameter mm 1,13
Dielectric foaming Physical
Diameter mm 4,8
shield
No. of plies 3
First foil bonded to dielectric No
Material Al/PET/Al
Dimensions μm 10/15/10
total thickness μm 41
Braid Material Aluminium
wire diameter mm 0,12
no. of wires pcs. 16 × 8
winding angle degree 26,69
braid coverage % 77
Second foil bonded to sheath No
Material Al/P/Al
ply thickness μm 10/15/10
total thickness μm 41
sheath Material PVC
thickness mm 0,7
Diameter mm 7
Color White
Electrical parameters
Resistance at 20°C Ω/km ≤32 (shield) ≤22 (conductor)
capacity pF/m 52,5
Wave reduction factor % 80
Mechanical properties
Operating temperature °C -20...+70
Installation temperature °C -10...+40
Minimum bending radius mm 70
Weight kg/km 54
Packaging
Spool Diameter mm 350
Width mm 340
spool hole diameter mm 39
Cable length m 500

Videos

Compressing Platinum F connector on RG-6 Tri-Shield cable

  • 2015-06-26

The video presents how to compress connectors on DIPOLNET Tri-Shield cable characterized by high screening efficiency (class A) thanks to two Al/P/Al foils and 77% braid coverage. With this characteristics, the cable is suitable for all RF distribution systems, including SMATV systems based on multiswitches.

Terminating lines in telecommunication junction box

  • 2014-07-01

Practical implementation of a home junction box.