Coaxial Cable 75 Ohm, TriSAT B2CA LSZH-FR+ class A+ 1.00/4.6/6.9 110 dB [1 m]

Code: E1022_1
€0.83
Price Disc. Quantity Validity
€0.83 0 % from 1 piece
Available
High-quality TriSAT B2CA coaxial cable dedicated for the construction of RF/SAT systems. Cable with LSZH-FR+ sheath (halogen-free insulation).
• Conforms to Class A+ standard
• Complies with the requirements of the construction legislation
• Fire reaction class in accordance with CPR - B2ca-s1a,d1,a1
• Cable in LSZH-FR+ sheath • Copper core 1.00 mm
• Low attenuation
• Excellent fit
• High shielding efficiency
• 78% braid coverage
• 10-year warranty

Warranty

10-year warranty.

Support

Details

Coaxial Cable 75 Ohm, TriSAT B2CA LSZH-FR+ class A+ 1.00/4.6/6.9 110 dB [1 m]
Close-up of the TriSAT B2CA cable with LSZH-FR+ coating.
Coaxial Cable 75 Ohm, TriSAT B2CA LSZH-FR+ class A+ 1.00/4.6/6.9 110 dB [1 m]
78% braid coverage – tinned copper.
Quality coaxial cable TRISET B2CA E1022 is suitable for RF/SAT antenna systems in commercial buildings. Cable with LSZH-FR+, halogen-free insulation used where increased safety levels are required in the event of a fire (schools, hospitals etc.). In the event of a fire, the cable does not spread flame, smoke emission is very low and the released gases are not corrosive.
It has an inner cooper conductor with a diameter of 1.00 mm and triple shield (Al/PET/Al+Sur foil (first) bonded to the dielectric + 78% density braid + Al/PET foil (second) boded to the sheath).
Key features:
  • conforms to Class A+ standard
  • complies with the requirements of the construction legislation
  • fire reaction class in accordance with CPR - B2ca-s1a,d1,a1
  • cable in LSZH-FR+ sheath
  • copper core 1.00 mm
  • low attenuation
  • excellent fit
  • high shielding efficiency
  • 78% braid coverage
  • 10-year warranty
The requirements for using cables with a specific reaction to fire class in a given type of building should be based on a risk analysis made by the installation designer or other national formal and legal documents. The CPR Directive does not impose on the EU Member States the requirements for types of buildings and associated cables with specific fire reaction classes. The reaction to fire class of cables and other conductors installed within evacuation routes should not be less than B2ca-s1b, d1, a1.
Coaxial cable for emergency exits
For more on cable fire resistance classes, read The CPR Directive - the new cable order
TRISAT cables are compliant with Construction Products Regulation (CPR) and EN 50575 standard that specifies reaction to fire performance requirements, test and assessment methods for cables used as building materials.
Coaxial Cable 75 Ohm, TriSAT B2CA LSZH-FR+ class A+ 1.00/4.6/6.9 110 dB [1 m]
The 75 ohm TriSAT B2CA E1022 coaxial cable has been tested at the notified body L.S. Fire Testing Institute Srl with a number 2479 and has been awarded B2ca-s1a,d1,a1 reaction to fire class.
TriSAT B2CA complies with the EN50117 standard and A+ class requirements in the whole 5-3000 MHz transmission frequency range.
The cable complies with the requirements of the Regulation of the Ministry of Transport, Construction and Maritime Economy on technical conditions to be met by buildings and their location of November 22, 2012, for the cabling dedicated to TV/SAT systems.
The cable has a declaration of conformity with RoHS, LVD, CPR.
The Regulation in § 192e item 4 specifies the following requirements for coaxial cables in teletechnical systems in buildings of collective residence:
Requirements TriSAT B2CA specifications 
Category RG-6 or higher TriSAT cables are RG-6
category products with improved performance
Double shield:
aluminium foil + ≥ 77% density braid
Triple shield:
Al/PET/+Sur foil (first) bonded to the dielectric + 78% density braid + Al/PET foil (second) bonded to the sheath
Cooper inner conductor
with at least 1 mm diameter
 Cooper conductor with a diameter of 1.00 mm
Class A Screening efficiency
0.03...1 GHz ≥ 85 dB
1...2 GHz ≥ 75 dB
2...3 GHz ≥ 65 dB
Screening efficiency
0.03...1 GHz ≥ 97 dB
1...2 GHz ≥ 85 dB
2...3 GHz ≥ 75 dB
 Transfer impedance < 5 mΩ/m  Transfer impedance < 0.9 mΩ/m
TriSAT B2CA complies with the following standards:
  • EN 60332-1-2 – test methods for reaction to fire of cables.
  • EN 50399 – heat release and smoke production measurement on cables during flame spread.
  • EN 60754-1/2 – corrosivity of gases evolved during the combustion.
  • EN 61034-2 – evaluation of formed smoke density.
The value of the cable's braid coverage (78%) remains in compliance with the requirements of the Ministry of Transport, Construction and Maritime Economy's regulation on the technical conditions to be met by buildings and their location.
High quality, triple shielded RG6 coaxial cable has an inner conductor made of +1.00 mm diameter copper wire+++, which ensures very low insertion loss. The core dose not corrode, and the cable is not stiff.
Optimum flexibility of the sheath allows for easy cable installation in shafts, as well as installation or junction boxes.
The cable is manufactured under strict quality standards, with tight tolerances.
In order to secure the minimum bend radius, flush mounted installations should be done with the use of protective conduits.
Screening efficiency TriSAT B2CA in 30-3000 MHz band
and requirements for the A+ class.
Coupling impedance in 5-30 MHz band
and requirements for the A+ class.
Insertion loss in the 5-2400 MHz frequency range
Return loss in 5-2400 MHz range
Input impedance characteristic in 5-2400 Mhz range
Matching impedance
According to the EN50117 standard, coaxial cables are divided into the following classes, depending on their screening efficiency: C, B, A, A+, A++.
Classes of screening efficiency
Class\freq. range
5-30 MHz [mOhm/m] 30-1000 MHz [dB] 1-2 GHz [dB] 2-3 GHz [dB]
C 50 75 65 55
B 15 75  65 55
A 5 85  75 65
A+ 2.5 95  85 75
A++ 0.9 105  95 85

 

 

Price for 1m

Specifications

Product type Coaxial cable
type TriSAT B2CA
Brand TriSAT
Cable length m per meter
Applications Indoor
Cable class RG-6
Compliance with relevant national legislation Yes
CPR class B2ca
Gel-filled cable No
Physical properties
Impedance Ohm 75
Screening efficiency class A+
Transfer impedance TI mΩ/m <0.9
Conductor Material Coper
Diameter mm 1,00
Dielectric foaming Physical
Diameter mm 4,6
shield
No. of plies 3
First foil bonded to dielectric Yes
Material Al/PET/Al+Sur
Dimensions μm 18 × 12/15/12
total thickness μm 80
Braid Material Tin-plated cooper
wire diameter mm 0,1
no. of wires pcs. 16 × 10
braid coverage % 78
Second foil bonded to sheath Yes
Material Al/PET
ply thickness μm 20 × 30/19
total thickness μm 27
sheath Material LSZH-FR+
Diameter mm 6,9
Color White (RAL 9010)
Electrical parameters
capacity pF/m 54
Wave reduction factor % 82
Mechanical properties
Operating temperature °C -25...+70
Installation temperature °C -5...+40
Minimum bending radius mm 35 (single) 70 (repeated)
Weight kg/km 56,20