Color CCTV Camera: n-cam 680 (600 TVL, Sony Super HAD II CCD, 0.01 lx, 2.8-12mm, IR up to 30m)

Code: M11274
This product is no longer available
Estore: Library:



n-cam 680 + IR - color CCTV camera with built-in 2.8-12 mm varifocal lens and IR illuminator.
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the camera
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Bottom view
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the included accessories
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the packaging
Distinguishing features:
  • Sony Super HDD CCD II sensor + New CP DSP
  • High resolution: 600 TVL (B/W 700 TVL)
  • High sensitivity: 0.01 lx
  • Varifocal lens: 2.8-12 mm
  • Built-in IR illuminator
  • Ability to adjust the brightness level of the IR LEDs
  • Test video output
n-cam IR 640 + IR camera captures high resolution video (600 TVL) by using high-tech imaging technology and special processing algorithms. Due to enhanced resolution it provides high-quality images with fine detail.
n-cam 680 + IR camera is equipped with highest quality 1/3'' Super HAD II CCD sensor + New CP DSP from SONY. This sensor is an improved version of SONY Super HAD CCD. The new sensor provides much better results than the predecessor - mainly in low-light conditions, where it ensures better colors and higher sensitivity. Below we present two pictures from cameras equipped with the two kinds of image sensors.
Comparison of images from two cameras: on the left - CCTV camera equipped with CCD SONY Super HAD; on the right - CCTV camera with CCD SONY Super HAD II. Source:
Due to this very good 1/3" Super HAD CCD II sensor + New CP DSP the camera is very sensitive (0.01 lx - IR OFF) and provides video with resolution of 600 TVL. High picture quality is guaranteed during the day and night. The built-in varifocal lens (2.8-12 mm) allows to adjust optimum viewing angle within 16o to 87o. The images obtained from the camera reflect true colors and allow to see small details, the edges of objects are sharp. The camera is very well prepared for operation in difficult lighting conditions. Due to high sensitivity of the camera, color images are free of "snow" even in relatively low lighting.
The camera has a built-in IR illuminator (42 LEDs) with range of 25-30 meters. The illuminator allows operation even in complete darkness. It switches on automatically when light intensity falls below 3 lx, and the camera continues operation in B/W mode. Additionally, the level of IR illumination can be adjusted with the "LED LEVEL" trim pot located on the bottom of the camera.
The IR reflector range depends on the type of illuminated objects/surfaces (reflectance in the infrared range).
At the bottom of the camera there is VIDEO TEST output that allows to monitor the camera image without disconnecting the main path. The output is particularly useful when adjusting the varifocal lens and image sharpness. At the bottom of the camera housing there are also knobs for focus and focal length adjustments.
The camera can operate outdoors (IP66). It is equipped with cables terminated with standard connectors: video - BNC, power - 2.1/5.5 socket. The cables can be placed in the bracket.

Name n-cam 680 + IR
Code M11274
Image sensor
1/3” CCD SONY Super HAD II + New CP DSP
Resolution 752x582 pixels
Sensitivity 0 lx (0.01 lx -IR OFF)
Lens 2.8-12 mm
Horizontal resolution
600 TVL (B/W 700 TVL)
IR illuminator
Yes, 42 IR LEDs, range up to 30 m
S/N ratio
>50 dB
CVBS 1 Vpp / 75 Ω
Scanning interlaced
Back light compensation
AGC yes
Electronic shutter
1/50 ... 1/100000 s
Operating temperature -20...+50 oC
Dimensions [mm]: Ø85x98x280
Power 12 VDC, 650 mA
Remarks: IP66 housing;
Built-in IR illuminator