Color CCTV Camera: U-cam 110 (box, 420 TVL, Sony Super HAD CCD, 0.8 lx)

Code: M1128
This product is no longer available
Estore: Library:

Support

Details

U-cam 110 is the most popular color CCTV camera. Due to SONY Super HAD image sensor on board, with 420 TVL resolution and high sensitivity, it is a clear category winner.

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the camera

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
Rear view

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
The included accessories

Specifications

Name

U-Cam 110

Code

M1128

Image sensor

1/3” SONY Super HAD CCD

Sensor resolution

510x492 pixels

Sensitivity

0.8 lx /F1.2 (AGC ON)

Horizontal resolution

420 TVL

AI control

DC

S/N ratio

>48dB (AGC OFF)

Electronic shutter

1/50 - 1/100000 [s]

Output video level

1 Vpp / 75 ohm

Synchronization

internal or external

Scanning

interlaced

Gamma correction

0.45

White balance

automatic / manual

AGC

yes

Backlight compensation

yes

Mirror function

yes

Power

DC12V/400mA

Weight 0.42 kg
Sharp edges, true colors and good parameters (sensitivity: 0.8 lx, video resolution: 420TVL) are the main features of the U-Cam 110 camera. It is probably the most popular camera in currently built CCTV systems, especially that the camera may be used indoors and outdoors. Comparative tests show even better sensitivity than declared by the manufacturer.
The camera ensures control of DC Auto Iris lens. LEVEL knob allows adjustment of the iris. Use of AI lens allows application of the camera in extremely variable lighting conditions.
The camera has been also equipped with electronic shutter and automatic backlight compensation, which, in turn, in the case of low light changes, makes possible to use cheap lens without AI or with manually set iris.
The camera enables the installer/user to set number of options and parameters:
NORM/MIR (Mirror) - see below
BLC/OFF (Back Light Compensation - on/off)
EE/AI Electronic Shutter/Auto Iris
AGC (Automatic Gain Control)
LEVEL - brightness level (only for DC lens)
AUTO IRIS - 4-pin socket for connecting AI lens
VIDEO OUT - video out (1Vp-p, 75ohm)
12V DC IN - power connector
Mirror function implemented in the camera transforms the original image into mirror image (horizontally). It ensures clearer sense of direction in certain configurations, mainly in the case of rear-view solutions. For example, they are used on tracks (e.g. TIR), helping the driver to reverse the long vehicle.
Cameras with that function are also employed in vehicles of driving schools.
The function is also very useful in larger buildings, with long corridors and big number of doors. When, at one end of such corridor there is a staircase, and a big window at the other, the camera has to be placed above the window and face the staircase (the opposite direction would cause operation against the light). In case of emergency, mirror image helps the operator of the surveillance system to properly instruct other services (the police, fire brigade) how to reach the destination - it is enough to say e.g. "third floor, the first door on the left", as it is seen on the screen.

Specifications

Nazwa

u-cam 110

Kod

M1128

Rozmiar przetwornika

1/3” SONY Super HAD CCD

Rozdzielczość

510x492 pikseli

Czułość

0,8 lx /F1,2 (włączone AGC)

Liczba linii

420 TVL

Obiektyw

DC

Odstęp sygnał - szum

S/N>48dB (wyłączone AGC)

Elektroniczna migawka

1/50 - 1/100000 s

Całkowity sygnał wizji

1 Vpp / 75 Om

Synchronizacja

Wewnętrzna lub zewnętrzna

Rodzaj wybierania

międzyliniowe

Korekcja Gamma

0,45

Balans bieli

automatyczny / manualny

Automatyczna kontrola wzmocnienia

tak

Kompensacja światła wstecznego
tak
Lustrzane odbicie (mirror)
tak
Zasilanie

DC12V / 400mA

Masa

0,42kg