Combination CO and Smoke Alarm Kidde 10SCO

Code: G9995
This product is no longer available
Estore: Library:

Support

Details

Combination CO and Smoke Alarm Kidde 10SCO
Combination CO and Smoke Alarm Kidde 10SCO
Combination CO and Smoke Alarm Kidde 10SCO
The included accessories
Combination CO and Smoke Alarm Kidde 10SCO
View of the package
The Kidde 10SCO is a battery-powered combination alarm that offers protection from the dual dangers of smoke and carbon monoxide (CO) in a single unit. The detector has two separate sensors, an optical sensor for smoke detection and an electrochemical sensor for carbon monoxide. Its voice alarm feature audibly announces which danger has been detected (in English). This is combined with a loud 85 dB alarm and red-blinking LED alerting the users about the potential danger.
The alarm has a peak level memory, which provides notification (voice and LED) when dangerous CO levels (above 100 PPM) have been previously detected. Thus, the users can verify whether during their absence in the room there was a dangerous level of carbon monoxide. The device also has a test/reset button to allow regular testing of the alarm function.
The detector is designed to be wall or ceiling mounted. Thanks to the fact that the unit is battery-powered, it is independent from the AC power network and can be installed in any suitable place throughout the home. A unique feature of the device is End of Life Warning Signal that alerts the users when it’s time to replace the unit after 10-year protection period.
Features:
  • one of the world's most precise electrochemical CO sensors,
  • high quality photoelectric smoke sensor guarantying long-term stability,
  • at least 40% longer lifespan compared with other detectors available on the market,
  • loud alarm sound
  • alarm’s warning messages informing on the actual hazard,
  • peak level memory,
  • Test / Reset button,
  • HUSH control feature that silences the unit during nuisance alarm situations,
  • battery-operated device - independence from AC power network,
  • wall or ceiling mountable,
  • tamper resist feature that deters children and others from removing the alarm,
  • low battery alert,
  • error and end of product life alarms,
  • easy to mount and operate,
  • aesthetic and tough casing,
  • front loading battery compartment, makes it easier to change the battery,
  • certified to EN14604:2006P (EN14604:2005),
  • certified to EN50291-1:2010,
  • 10-year warranty.
To ensure proper operation of the sensors and to avoid false alarms, the detectors should not be installed in areas exposed to dust, dirt, grease or household chemicals. It is necessary to avoid places where the temperature may exceed the operating range (attics, garages etc) and keep the devices away (min. 1.8 m) from any appliance that may be a source of CO. False alarms can also be triggered after placing the devices near chimney or ventilation grilles, fireplaces, ceiling fans, doors, windows and wherever their operation may be affected by the movement of fresh air or changing weather conditions. The detectors cannot be covered by furniture, curtains or other objects that may block the access of air to the sensors.
CO alarm threshold levels and alarm activation times are compliant with EN 50291-1:2010.
  • 30 PPM - no alarm before 120 minutes
  • 50 PPM - alarm between 60-90 minutes
  • 100 PPM - alarm between 10-40 minutes
  • 300 PPM - alarm within 3 minutes
Name 10SCO
Code G9995
Category Carbon monoxide and smoke detector
Autonomous operation YES
Sensors Photoelectric and electrochemical
Optical alarm
LED
Sound alarm 85 dB, voice alerts
Environment humidity range
 Up to 90% RH (no condensation)
Power 9 VDC alkaline battery (included)
Low battery indication YES
Test / Reset button
YES
Peak level memory YES
Mounting Wall/ceiling
Warranty 10 years
Temperature range           0°C…+40°C (operation),
-10°C…+60°C (storage/transport)
Weight (with battery) 360 g
Dimensions Ø 145 mm x 45 mm

 

Specifications

Nazwa 10SCO
Kod towaru G9995
Rodzaj czujnika Czujnik czadu i dymu
Czujnik autonomiczny TAK
Rodzaj sensora Optyczny / Elektrochemiczny
Sygnalizacja optyczna Dioda LED,
Sygnalizacja akustyczna 85 dB, Czerwona dioda LED
Wilgotność powietrza  do 90% RH, bez kondensacji
Zasilanie 9V DC, bateria alkaliczna (w zestawie)
Sygnalizacja słabej baterii TAK
Przycisk Test / Reset TAK
Pamięć wartości szczytowych TAK
Sposób montażu Na suficie lub ścianie
Gwarancja 10 lat
Zakres temperatur           +0…+40°C praca
-10…+60°C transport i składowanie
Waga (z bateriami) 360g
Wymiary Ø 145 x 45 mm