€79.59
Price | Disc. | Quantity | Validity |
---|---|---|---|
€79.59 | 0 % | from 1 piece |
Available
AXON PoE Multi NetProtector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks, such as network interface cards, hubs, switches, routers etc.
• Protection of LAN segment, including PoE solutions
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
Details
AXON PoE Multi NetProtector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks, such as network interface cards, hubs, switches, routers etc.
This device consists of 4 independent channels (input/output), within which all four pairs of twisted-pair UTP cables are secured by carrying off the excessive electric charge to the ground.
The manufacturer adjusted the thresholds depending on whether a pair of wires carries the Ethernet data or power (PoE).
Specifications
Name | Surge protector AXON PoE Multi NETProtector 4 × IN | ||
Product type | LAN network protection | ||
Manufacturer | AXON | ||
Specifications | |||
Maximum voltage | V | 56 | |
Circuit protection level (line-to-line) | Signal path | V | 5 |
Power path | V | 95 | |
Circuit protection level (line-to-ground) | Signal path | V | 600 |
Power path | V | 1000 | |
Nominal discharge current (line-to-line) | Signal path | A | 20 (8/20µs) |
Power path | A | 10 (8/20µs) | |
Nominal discharge current (line-to-ground) | Signal path | A | 20 (8/20µs) |
Power path | A | 2000 (8/20µs) | |
Protected twisted-pair cables | 1, 2, 3, 4, 5, 6, 7, 8 | ||
Connectors | Input | RJ-45 | |
Output | RJ-45 | ||
input count | 4 | ||
number of outputs | 4 | ||
Built-in PoE adapter | No | ||
Dimensions | mm | 166 × 49 × 30 |