€11.21
| Price | Disc. | Quantity | Validity |
|---|---|---|---|
| €11.21 | 0 % | from 1 piece |
Available
NetProtect computer network security is designed to protect devices connected to a 10/100 Mbps Ethernet network.
• Socket type: RJ-45
• Protected cable conductors: 1, 2, 3, 6
• Dimensions: 40x50x20 mm
• Protected cable conductors: 1, 2, 3, 6
• Dimensions: 40x50x20 mm
Details
Key features:
- maximum impulse power: 1500 W
- maximum impulse voltage (peak-to-peak): 6 kV
- maximum current intensity of inter-wire surge (t<10 us): 132 A
- protection of 1,2,3,6 wires of UTP/FTP cable
During thunderstorms electronic devices are very vulnerable to damages. Risk of over-voltage is present even in spots 1.5 km distant from the place where a lightning bolt strikes.
NetProtect reduces the voltage to a safe level in accordance with European standards for this type of equipment reducing the number of failures. It does not require a power supply and does not cause interference with data transmission.
Specifications
| - inter-wire protection voltage (threshold) | 7.5 V |
| - line-ground protection voltage (threshold) | 500 V |
| - maximum impulse voltage (peak-to-peak) | 6 kV |
| - maximum current intensity of inter-wire surge | 132 A (10 μs) |
| - maximum impulse power | 1500 W |
| - protected UTP/FTP pairs | 1-2, 3-6, 4-5, 7-8 |
| - IN/OUT connectors | RJ45, shielded |
| - length of grounding cable | 1.4 m |
| - dimensions | 40x50x20 mm |
| - weight | 50 g |
| - operating temperature range | -10°C ... +55°C |
NOTE: If the protected line can suffer from over-voltages higher than the values above, preliminary security measures must be used.
Before beginning the installation, the electrical outlet grounding must function properly, and the protected device has to be correctly connected. If grounding fails, the protector and network will not work properly.
The right grounding
To avoid overvoltages the protector should be connected to grounding with resistance below 4 ohm. The connection should be screwed down or soldered. It is not allowed to use lightning conductors/arresters or gas installation pipes!!!
The device protects only the equipment to which is directly connected. Lack of grounding in one of the computers connected to a concentrator can result in threshold voltage without an external reason!
Specifications
| Name | NetProtect computer system protection | ||
| Product type | LAN network protection | ||
| Specifications | |||
| Circuit protection level (line-to-line) | Signal path | V | 7.5 |
| Circuit protection level (line-to-ground) | Signal path | V | 500 |
| Maximum discharge current (line-to-line) | Signal path | A | 132 (10 μs) |
| Protected twisted-pair cables | 1, 2, 3, 6 | ||
| Connectors | Input | RJ-45 | |
| Connectors | Output | RJ-45 | |
| input count | 1 | ||
| number of outputs | 1 | ||
| Built-in PoE adapter | No | ||
| Dimensions | mm | 40 × 50 × 20 | |

