Dahua ITC413-PW4D-IZ1 IP camera (4 MP, 2.7–12 mm, 0.0002 lx, IR up to 30 m, WDR, ANPR)

Code: Q1341
€1369.10
Price Disc. Quantity Validity
€1369.10 0 % from 1 piece
ANPR/LPR camera for number plate recognition systems with a range of 3–10 m, featuring an IR illuminator.
• Intelligent deep learning algorithms recognise vehicle number plates, models and colours at speeds of up to 80 km/h
• IVS support – intrusion and loitering detection across four independent detection zones
• Active deterrence – flashing red and blue LEDs, loudspeaker
• 1 IN / 1 OUT audio connector for connecting a microphone / speaker
• 1 x Wiegand interface, 2 x alarm inputs, 2 x alarm outputs, RS-485
• Includes a remote control (433 MHz and 868 MHz) with a range of up to 15 m
• Recording to a microSD card
• Power supply: 12 V DC or PoE (802.3at)
• IP67 and IK10 protection rating

Warranty

3-year warranty.

Support

Details

The camera is designed for number plate recognition systems, also known as ANPR (Automatic Number Plate Recognition) or LPR (Licence Plate Recognition). The device can recognise number plates, as well as vehicle makes and colours, with high accuracy (>98%) using deep learning algorithms.
It is used in scenarios requiring vehicle access authorisation, such as homes, shop car parks or residential estates. Integration with various automation systems, e.g. barriers or gates, is achieved via two alarm outputs. Additionally, vehicle classification (model, colour) enables quick searching of events using smart filters, which significantly facilitates locating a specific section of video footage.
The device supports IVS (Intelligent Video System) analytics, enabling the detection of events such as intrusion and loitering in four independent detection zones. In response to these events, it can trigger audible and visual alarms.
The camera can operate autonomously or in conjunction with a recorder. When operating autonomously, a list of number plates divided into two categories – Whitelist and Blacklist – can be imported directly into the device. Depending on which list a particular number plate is on, you can control one of the two relay outputs (to control a barrier, entrance gate, etc.) with which the camera is equipped, trigger available alarm events, or notify the alarm centre.
When working with a recorder, the system gains greater functionality. A section of the interface dedicated to number plate identification is available, where you can quickly and easily search for specific number plates, view detection images and the accompanying recordings.
The camera is dust- and water-resistant (IP67) and vandal-proof (IK10).
Key features:
  • intelligent deep learning algorithms recognise vehicle number plates, models and colours at speeds of up to 80 km/h
  • IVS support – intrusion and loitering detection across four independent detection zones
  • active deterrence – flashing red and blue LEDs, loudspeaker
  • 1 IN / 1 OUT audio connector for connecting a microphone / speaker
  • 1 x Wiegand interface, 2 x alarm inputs, 2 x alarm outputs, RS-485
  • includes remote control (868 MHz) with a range of up to 15 m
  • microSD card recording capability
  • 12 V DC or PoE (802.3at) power supply
  • IP67 and IK10 protection rating
Correct installation is essential for achieving maximum number plate recognition performance. Before selecting an installation location, please take the following guidelines into account:
  • the number plate must occupy a sufficient number of pixels within the camera frame to ensure the high image quality required for accurate recognition – the width of the number plate should be at least 140 px in the image
  • the vertical tilt of the camera should not exceed 30°, which means it must be mounted at a suitable distance from the point where number plates are detected (distance Y > 1.7X)
Diagram illustrating the positioning of an LPR camera in the vertical plane: x - the height of the camera mounting location, y - the horizontal distance between the mounting location and detection point (measured on the ground), z - the distance from the camera to the detection point, α - the vertical angle.
The table below shows the recommended installation height, detection range and field of view for the various models:
Model Height [m] Range [m] Width [m]
ITC413-PW4D-IZ1 1.2 3–8 3–4 
1.5 4–8
1.8 4.2–8
2 4.5–8
2 6–10
ITC413-PW4D-IZ3 2 6–10 3–4
2.5 6–12
3 6–15
3.5 6–17
4 7–19.5
4.5 8–20
5 8.5–20
5.5 9.5–20
6 10–20
3 12–15 6–8
3.5 12–17
12–20 4–6
  • the horizontal deviation of the camera from the direction of the vehicle's movement should not exceed 30°, and the tilt of the number plate in the image should not exceed +/- 5°
Diagram illustrating the positioning of an LPR camera in the horizontal plane.
The horizontal angle β should not exceed 30°.
  • lighting of at least 10 lux must be provided – at night and on cloudy days, the boards must be illuminated with white light or infrared light

Specifications

Model ITC413-PW4D-IZ1
Product type IP camera
Brand Dahua
Series Project
Type LPR
Applications Outdoor
Housing Tubular
Adjustment 3-axis
Color White
Reset button Yes
Optical module and image
Sensor type CMOS
Sensor size 1/1.8
Sensitivity (color mode) lx 0,0002 @ F1,4
Shutter speed S 1/25 – 1/100000
Lens type Motozoom
P-iris lens Yes
Focal length mm 2.7 – 12
Viewing angle horizontal ° 92 - 46
Focus setting Manual/semi-automatic/automatic
Main stream max. resolution MP 4
max. resolution px 2688 × 1520
max. resolution fps 25
Other image functions AGC, AWB, 3D-DNR, BLC, HLC
WDR dB 140
Regions of interest ROI 3
Day/night mode Yes
Illuminator
IR Range m 30
wavelength nm 850
illuminator type EXIR
Video compression
Compression methods H.265+, H.265, H.264+, H.264
Bitrate 2,7 -13 Mb/s
No. of streams 2
Data recording
microSD slot Yes
Recording types MicroSD (max. 256 GB)
ANR function Yes
Audio
Audio support Yes
Compression method G.722.1, G.726, MP2L2, MP3, PCM
Image analysis (conventional algorithm)
Basic incidents Audio exception, Change of image focus, Scene change, Exception, Image tampering
Intelligent image analysis (Deep Learning algorithm)
Human, vehicle classification Intrusion, rambling
ANPR
ANPR support Yes
Vehicle detection based on Deep Learning algorithm Yes
Interception rate % >98
White/black list of vehicles stored in the camera k 10
Support for vehicle attribute detection, including vehicle type, color, make, etc. (city street mode is recommended) Yes
Network
Protocols SFTP, SRTP, TCP/IP, WebSocket, WebSockets, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1 × , QoS, Bonjour, IPv6, UDP, SSL/TLS
Standards CGI, ITSAPI, Onvif, P2P
Live view 10 channels simultaneously
Client applications Smart PSS, DSS, DMSS, Hik-Connect, Hik-Central
Supported browsers Edge 89+, Chrome 57,0+, Firefox 52,0+, Safari 11+
Interfaces
Ethernet 1 × RJ-45 10/100/1000 MBps
RS-485 Yes
Wiegand Yes
Alarm in/out Yes
Alarm Input 2
Output 2 (relay)
Output rating 2A, 30 VDC or 0.5A 125 VAC, max. 24 V/DC, 1A
Audio Built-in microphone Yes
Built in speaker Yes
Input Yes
Output Yes
Others
Polish language supported Yes
Power supply PoE V 42.5-57 (802.3at)
PoE A 0.396 – 0.295
PoE W max. 20
DC V 12
DC A 1.6
Housing material Aluminum alloy
Protection rating IP67, IK10
Operating temperature °C -40...70
Humidity % 95 or less (non-condensing)
Camera dimensions mm 395 x 128 x 121
Weight kg 2.3